Posted: Sun May 24, 2015 7:14 Post subject: Ad block for TL-WDR3600
Hi! I saw that it's possible to add a script that works same to every ad blocker. I use Adblock Plus on my PCs, but I can't install it on Android devices. Can you say me a guide that works and a way to use Adblock's "file host"? Thank you!
Copy the entire script from the above link, it consist of additional ad blocking sources
Go to Administration=>Command
Paste it in the field given, Save as Firewall
Once done it will start downloading the rules and after a minute or so it should be working.. The script creates a cron job and by default settings cron is enabled so will refresh regularly...
The above procedure blocks ads effectively but places where ads are displayed now will show error messages, which is obvious as the destination is blocked.
You'll get an idea of how the first can be improved using the second link..
Considering your router has a 8MB flash you'll be able to use the expert method, do it carefully though..
You should be getting no error message if you follow the expert way..
Unlucky me, my router is a TL-WR740N with 4MB flash so I couldn't go ahead with the expert way as JFFS2 creation isn't supported due to lack of space .. _________________ TP-Link: TL-WR740N
Copy the entire script from the above link, it consist of additional ad blocking sources
Go to Administration=>Command
Paste it in the field given, Save as Firewall
Once done it will start downloading the rules and after a minute or so it should be working.. The script creates a cron job and by default settings cron is enabled so will refresh regularly...
The above procedure blocks ads effectively but places where ads are displayed now will show error messages, which is obvious as the destination is blocked.
You'll get an idea of how the first can be improved using the second link..
Considering your router has a 8MB flash you'll be able to use the expert method, do it carefully though..
You should be getting no error message if you follow the expert way..
Unlucky me, my router is a TL-WR740N with 4MB flash so I couldn't go ahead with the expert way as JFFS2 creation isn't supported due to lack of space ..
I'm following the first expert guide, but I get blocked when I have to create the folder DNS, with an error message 1 (like the folder is read-only). How can I resolve?
Copy the entire script from the above link, it consist of additional ad blocking sources
Go to Administration=>Command
Paste it in the field given, Save as Firewall
Once done it will start downloading the rules and after a minute or so it should be working.. The script creates a cron job and by default settings cron is enabled so will refresh regularly...
The above procedure blocks ads effectively but places where ads are displayed now will show error messages, which is obvious as the destination is blocked.
You'll get an idea of how the first can be improved using the second link..
Considering your router has a 8MB flash you'll be able to use the expert method, do it carefully though..
You should be getting no error message if you follow the expert way..
Unlucky me, my router is a TL-WR740N with 4MB flash so I couldn't go ahead with the expert way as JFFS2 creation isn't supported due to lack of space ..
I'm following the first expert guide, but I get blocked when I have to create the folder DNS, with an error message 1 (like the folder is read-only). How can I resolve?
I guest you forgot to enable Jffs and format it. Then reboot your router...
that can explain why it complained about it is read only ....
No.. I have enabled it and rebooted the router, but look at the attachments (they are in Italian, but it is simple to understand): it seems that there is no available space in the /jffs partition, but there are no files there
I guest you forgot to enable Jffs and format it. Then reboot your router...
that can explain why it complained about it is read only ....
No.. I have enabled it and rebooted the router, but look at the attachments (they are in Italian, but it is simple to understand): it seems that there is no available space in the /jffs partition, but there are no files there
With the previous firmware is the same thing
gotta.. you enabled jffs but forgot to clean it up( I can see it in your pic even it is Italian ha ha... you have enable clean it up too ...Reboot it again It should be ok after that...