Posted: Fri Aug 28, 2015 19:02 Post subject: New user question
i have just flashed dd-wrt on to my NETGEAR EX6200 and im having a subnet issue that i cant find in the wiki.
i have my ISP modem/router combo and this now ddwrt router however i cant seem to separate the subnets when i connect from my router the ISPs.Every time i connect to my router the subnet appears on the ISPs. These are connected with CAT5e cable.
The ISP:
subnet mask = 255.255.255.0
Gateway IP = 192.168.0.1
DHCP server: ON
dns ISP provided : yes
ipv6 :off
ive set up the ddwrt to
local ip: 192.168.2.1
subnet mask 255.255.255.0
gateway ip: 192.168.2.1
local dns: 192.168.2.1
dhcp server is ON
static DNS 1: 8.8.8.8
use DNSMasq : yes
ipv6 :off
Operating mode : router and ive tried gateway
Dynamic Routing: Both
static Routing : not set
beyond that everything is default! So why cant i get to the subnet of my ddwrt router, but yet i get internet but im put on the subnet of the ISPs router.
P.S. i did have an old normal router for where i live but it recently died. it was a netgear and required very if none setup, but still was running (WGR614v9)