goldie103 DD-WRT Novice
Joined: 12 Sep 2015 Posts: 1
|
Posted: Sat Sep 12, 2015 10:25 Post subject: DIR-600 B2 first flash; may have bricked it |
|
Hi,
I recently tried to flash my DIR-600 B2 router through the web interface. I used build 21061 and Firefox, and after the 140 second wait it redirected me to an error page and I was unable to access either 192.168.0.1 or 192.168.1.1 and the router's power light was blinking amber.
Stupidly, I didn't do a reset before the flash, though I have since done several resets and attempted to enter recovery mode by holding down the reset button and plugging in power. Each time, I can see it's trying to connect to something at 192.168.0.1, but it always times out.
Setting my IP to 192.168.0.2 and pinging 192.168.0.1 results in "Destination host unreachable". Most of my reading suggests that I should be able to access the recovery page if the power button is blinking amber, but I haven't had any luck.
Any help would be appreciated. |
|