Posted: Wed Sep 30, 2015 2:46 Post subject: Netgear WNR2000v3 problem with LAN ports at default config
NOTE: This is ME and English Translator
SEE the images first!!!
I have a Netgear WNR2000v3 with default config
Firmware: DD-WRT v24-sp2 (03/19/12) std
DD-WRT version is 20120319 build 18777
Netgear WNR2000v3 router WAN port 192.168.0.10 with internet access
PS3 is in port lan1 192.168.1.138
PC is in port lan2 192.168.1.132
Cellphone android is in WIFI 192.168.1.113
All of these devices have internet access,
but there is not ping to PS3 form the PC but I can ping to ps3 from the cellphone.
If I use FING app this shown
The Question is WHY???
If I change the router with another DD-WRT router, other model obviously works without problems.
By cable lan DLNA and other stuff is not working .
It's my guess that your PC has configured that network on that router as a public network rather than a private network, which can sometimes happen as you jump from one router to another. Any network designated as public is going to be protected by the Windows firewall from access by other devices on that same network. So I would go into the Network and Sharing Center of Windows and verify the network type is indeed private.
I used this command in UBUNTU nmap 192.168.1.0/24 and I can't see the others devices connected by cable on the same router only with cable, maybe is the ddwrt firmware glitch because with the original firmware works fine .