Posted: Sat Oct 01, 2016 20:23 Post subject: Webrevert for TL-WR941ND v.6
All,
I was able to flash my TL-wr941nd v.6 without issue, but I now want to revert back to the TP Link factory firmware. Any ideas on how to do this? I've tried a number of things, none of which have bricked the router, but I cannot for the life of me get the DD-WRT off of it. Any help with a webrevert file and some instructions on how to get it back to the TPL firmware would be awesome. Thanks!
Posted: Sun Mar 25, 2018 21:46 Post subject: Re: TP-Link TL-WA901ND v4 DD-WRT support
KrypteX wrote:
This thread is intended for the discussion of DD-WRT support for TP-Link TL-WA901ND v4.
Specs of v4 hardware:
CPU Atheros TP9343 (QCA9561 variant) 750MHz
RAM 32MB
Flash 4MB
I've modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR941ND v6, so it will flash on a TL-WA901ND v4 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-29739 webflash build for TL-WR941ND v6.
Note: The older modified build 28211 that I sent to user softjad (discussed in some of the following posts) was based on WA901ND v3, but wasn't working properly and you should not use that one !
Disclaimer: I haven't tested the attached build myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.
You must be logged in to be able to download the attachment.
Hello everyone. I have done an update with this file and everything working fine except WAN port which is for me crucial because I would like to use a device for a hotspot. Is there any wha how I can turn WA port to work?