Router: WZR-300HP (aka WZR-HP-G300NH2)
Firmware: DD-WRT v3.0-r28374 std (11/28/15)
Kernel: Linux 3.10.93 #12242 Sat Nov 28 04:13:26 CET 2015 mips
Status: Not Bricked
Reset: No (r28320 -> r28374)
Errors: SSH is not working _________________ Router: Buffalo WZR-300HP w/ DD-WRT build #28444
Router: TP-LINK Archer C7 v2
Firmware: DD-WRT v3.0-r28374 std (11/28/15)
Kernel: Linux 3.18.24 #6507 Sat Nov 28 06:05:25 CET 2015 mips
Status: OK.
Reset: No.
Note: Can't confirm SSH, don't use it ATM. 5GHz working perfectly.
WNDR3700 V4
DD-WRT v3.0-r28374 std (11/28/15)
Linux 3.10.93 #12332 Sat Nov 28 06:20:56 CET 2015 mipss
update live over 28366
using as main router
Both radios ok
ath0.1 guest ok
Recursive DNS Resolving -- same as it has been see --log
sshd ......dropbear is apparently sleeping but he works if you wake him up see --log
Other than that 28374 working ok for me ~
Router Model: D-Link DIR-615E3
Firmware: DD-WRT v3.0-r28374 std (11/28/15)
Status: OK
Reset: No
Errors: No error flashing to new version from DD-WRT v3.0-r27456 (06/27/15) std
Issue: Still cannot access devices plugged into LAN ports from devices plugged into other LAN ports. I promptly returned to version r27456 because of this, as that seems to be the last time this worked.
Also, the "Net Isolation" feature is still missing from the Virtual Interfaces advanced menu, despite everything I've read that indicates that it should be there (?). I won't try to create Guest WiFi without that.
Router: D-Link DIR-615E3
Firmware: 28374
Status: Not OK
Reset: Yes
Errors: Websites load slow and there seems to be some type of bottleneck for wireless clients. Reverted to last known good build: DD-WRT v3.0-r27745 (08/25/15). All builds after 27745 on this specific router make this unit's wireless performance abysmal.
Last edited by teslacoil on Sun Nov 29, 2015 15:00; edited 1 time in total
Router: D-Link DIR-615E3
Firmware: 28374
Status: Not OK
Reset: Yes
Errors: Websites load slow and there seems to be some type of bottleneck for wireless clients. Reverted to last known good build: DD-WRT v3.0-r27745 (08/25/15). All builds after 27745 on this specific router make this unit's wireless performance abysmal.
Thank you for the link, tatsuya46.
I have tried change to 30dBm for 2.4ghz from the advanced wireless settings, but in the status menu i always see 17dBm for 2.4ghz. When i changed to 30dBm for 5ghz in the status menu i see always 27dBm. Why 2.4ghz does not set higher dBm?
By the way, when i use "advanced wireless settings", after the changes are applied and i go to other tabs in menu and return back to the "Basic settings" for wireless, the "andvanced settings" checkbox became unticked. Why?
