Linksys ea8500 port is ready

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3 ... 21, 22, 23 ... 123, 124, 125  Next
Author Message
no.25
DD-WRT Novice


Joined: 20 Dec 2015
Posts: 25

PostPosted: Mon May 16, 2016 13:17    Post subject: Reply with quote
wheaton4prez wrote:
do the lights react and go through a reboot dance?


There is no reaction on pushing the reset button. The device is doing a infinite reboot loop every 55 seconds...
Sponsor
larsed
DD-WRT Novice


Joined: 16 May 2016
Posts: 1

PostPosted: Mon May 16, 2016 15:22    Post subject: Reply with quote
no.25 wrote:
[
There is no reaction on pushing the reset button. The device is doing a infinite reboot loop every 55 seconds...


Try the power reboot as Kong suggested. It worked of me Very Happy and it was caused by a corrupted configuration.
no.25
DD-WRT Novice


Joined: 20 Dec 2015
Posts: 25

PostPosted: Mon May 16, 2016 17:51    Post subject: Reply with quote
larsed wrote:
Try the power reboot as Kong suggested. It worked of me Very Happy and it was caused by a corrupted configuration.


Yip! That worked! First I didn't see Kong's last post... Rolling Eyes
Turning on/off three times (5s each) was the solution...
no.25
DD-WRT Novice


Joined: 20 Dec 2015
Posts: 25

PostPosted: Mon May 16, 2016 19:12    Post subject: SSL connection dead after update to KONGs 29670M? Reply with quote
After flashing to Kong's newest version DD-WRT v3.0-r29670M kongat (05/15/16)
I cannot get https-connection with self signed certificate to the device anymore. http works fine though.

With "r29510M kongat" it was no problem. I used the following startup command and did copy and paste from the old configuration. Any ideas?

_____________________
Startup

mkdir /tmp/ssl
echo "-----BEGIN RSA PRIVATE KEY-----
....key...
-----END RSA PRIVATE KEY-----" > /tmp/ssl/key.pem

echo "-----BEGIN CERTIFICATE-----
....certificate...
-----END CERTIFICATE-----" > /tmp/ssl/cert.pem

chmod 0600 /tmp/ssl/key.pem
mount -o bind /tmp/ssl/cert.pem /etc/cert.pem
mount -o bind /tmp/ssl/key.pem /etc/key.pem

stopservice httpd
startservice httpd
Wolf Kodi
DD-WRT User


Joined: 13 Jun 2010
Posts: 126

PostPosted: Wed May 18, 2016 12:46    Post subject: Re: New Kong-Version doesn't work??? Reply with quote
no.25 wrote:
Today I updated my EA8500 from DD-WRT v3.0-r29510M kongat (04/24/16) to the newest version (05/15/16) from Kong's site.
Now it is impossible to connect to the device. 30/30/30 reset didn't help.

Any ideas to solve this without serial cable?


Faced the same issue and had to use the on/off 3 times with a few seconds in-between method to revert back.

On serial output, it was crashing and rebooting at this point:
Code:

[   19.293367] SCSI subsystem initialized
[   19.470520] usbcore: registered new interface driver usb-storage
[   19.797291] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x0 impl platform mode
[   19.797353] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[   19.807883] scsi host0: ahci_platform
[   19.814826] ata1: DUMMY
[   40.942267] INFO: rcu_preempt detected stalls on CPUs/tasks: {} (detected by 1, t=2102 jiffies, g=19, c=18, q=38)
[   40.947069] INFO: Stall ended before state dump start

_________________


YouTube | Facebook Page
Per-user Live Down/Upload Rate Monitoring [No PC needed!]
Rotnam
DD-WRT Novice


Joined: 24 May 2016
Posts: 1

PostPosted: Tue May 24, 2016 18:46    Post subject: Reply with quote
Question, I couldn't find around.

I tried the standard build and the King one, the latests, I dont have the radius tab anymore under wireless. Was that part not ported yet or they moved it somewhere else ?

Edit: well I typed Wireless_radauth.asp manually and it worked. Will test this first !!
paleta
DD-WRT Novice


Joined: 12 Sep 2011
Posts: 4

PostPosted: Fri May 27, 2016 1:17    Post subject: Reply with quote
tatsuya46 wrote:
non us version yes, if its a us version maybe..but after unbricking mine i had a thought, since it was by serial connection using tftp, i wonder if that method would bypass & overwrite the encrypted firmware..since flashing/unbricking that way is before the firmware even boots. but too afraid to update mine to latest stock fw to try it (assuming EA8500-CA is = to us version)


@tatsuya46 I just managed to install DD-WRT on my signed EA8500 following the procedures specified on the forum, but to consolidate I'll put the steps right here:

1) Follow this guide to open the router and attach the serial cable
https://community.linksys.com/t5/Wireless-Routers/EA8500-powers-down-after-around-6-hours-or-so/m-p/956379/highlight/true#M304641

2) Fire up Putty using the following settings
115200 baud rate
8 bit data
parity none
1 bit stop
control flow none

3) As soon as u-boot starts press a key to enter interactive boot (if pressing a key does not work MAKE SURE CONTROL FLOW IS SET TO NONE, this was my case)

4) Connect your computer to ethernet port 1 of the router

5) Set your ip address to 192.168.1.2

6) execute: ping 192.168.1.2 to make sure the router can connect to your computer

7) Start a tftpd server using that ip (192.168.1.2) poiting to DD-WRT img file

Cool Execute the following

setenv image EA8500-factory-to-ddwrt.img
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.2
run flashimg
run flashimg2

9) Execute: reset

10) From your computer connect to 192.168.1.1 and you'll see DD-WRT on all its glory!

Thanks everyone, you have been very helpful, the stock signed image was driving me nuts.
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Fri May 27, 2016 1:37    Post subject: Reply with quote
so serial tftp gets around the encrypted fw, well thats good to know
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

paleta
DD-WRT Novice


Joined: 12 Sep 2011
Posts: 4

PostPosted: Fri May 27, 2016 2:51    Post subject: Reply with quote
tatsuya46 wrote:
so serial tftp gets around the encrypted fw, well thats good to know


Yes sir!, I'm currently on

DD-WRT v3.0-r29695M kongat (05/16/16)
wheaton4prez
DD-WRT User


Joined: 14 Jul 2015
Posts: 91

PostPosted: Sun May 29, 2016 1:46    Post subject: Reply with quote
After using this build for a while, I've notice some repeating problems. Could be me setting something wrong though.

Some devices work fine (older Android phone). But, Apple devices don't seem to have great range and family members are reading me the riot act over dropped connections.

Any ideas on how to stablize?
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Sun May 29, 2016 3:18    Post subject: Reply with quote
great range on my iphone 6 ios 9.3.3 beta 1
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

wheaton4prez
DD-WRT User


Joined: 14 Jul 2015
Posts: 91

PostPosted: Sun May 29, 2016 4:11    Post subject: Reply with quote
tatsuya46 wrote:
great range on my iphone 6 ios 9.3.3 beta 1


What wireless settings are you using?

The construction of our house includes steel beams which has always caused issues for wireless. But, I was using an R7500 with stock firmware that seemed to perform better than the ea8500 with dd-wrt...
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Sun May 29, 2016 4:45    Post subject: Reply with quote
these
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

wheaton4prez
DD-WRT User


Joined: 14 Jul 2015
Posts: 91

PostPosted: Sun May 29, 2016 5:41    Post subject: Reply with quote
Thank you. A few things different from mine. Will give those settings a shot.
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Sun May 29, 2016 23:27    Post subject: Reply with quote
well r29770m seems to have fixed the latency spikes with intel ac 7260 nic. ath10k 10.4 still not updating noise floor automatically but 10.2.4 does.
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

Goto page Previous  1, 2, 3 ... 21, 22, 23 ... 123, 124, 125  Next Display posts from previous:    Page 22 of 125
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum