Hmm, I completely lost the 5G radio when I upgraded to r31700M. Downgrading to 31240 restored it... _________________ Netgear Nighthawk X4 R7500v2
DD-WRT v3.0-r30870M kongat (11/11/2016)
Hmm, I completely lost the 5G radio when I upgraded to r31700M. Downgrading to 31240 restored it...
erase nvram, power cycle the router after it fully boots up
Can I import my previous settings after that, or should I enter everything by hand? _________________ Netgear Nighthawk X4 R7500v2
DD-WRT v3.0-r30870M kongat (11/11/2016)
Can I import my previous settings after that, or should I enter everything by hand?
By hand. There were major changes in nvram structure in the last couple builds
OK thanks. Do you have a clever way to save all the settings from the GUI to facilitate their reentry? _________________ Netgear Nighthawk X4 R7500v2
DD-WRT v3.0-r30870M kongat (11/11/2016)
Posted: Thu Mar 23, 2017 19:14 Post subject: SSH problems need help to disable it
I recently by a mistake enabled SSH and telnet but have not properly configured them.
Anyway I can get into the router to disable all of that or at the very least do a firmware reset? I can't access the router and only on Microsoft Edge does it show anything 'SSH-2.0-dropbear_2016.74 ý®NzìÞlÊIQùÒÈ÷²Pdiffie-hellman-group14-sha1,diffie-hellman-group1-sha1,kexguess2@matt.ucc.asn.aussh-rsa+aes128-ctr,aes256-ctr,aes128-cbc,aes256-cbc+aes128-ctr,aes256-ctr,aes128-cbc,aes256-cbchmac-sha1,hmac-md5hmac-sha1,hmac-md5nonenone@ËC'
Turn the router off. Press in and hold the reset button while powering on the router. Keep it pressed in for 15 seconds then upload the netgear firmware. _________________ I am far from a guru, I'm barely a novice.
Turn the router off. Press in and hold the reset button while powering on the router. Keep it pressed in for 15 seconds then upload the netgear firmware.
By that do you mean upload the file the router makes me download when I try to access login page?
if So I have a bunch of them. I just finished doing the 30/30/30 reset and did not help. Did not reset anything on the router. Settings are still in-tact thanks for the reply.
Turn the router off. Press in and hold the reset button while powering on the router. Keep it pressed in for 15 seconds then upload the netgear firmware.
Then do this using tftpd32, you can download it and download the netgear firmware, unzip it and use that with the tftpd32 program or whichever tftp program you like. _________________ I am far from a guru, I'm barely a novice.
Turn the router off. Press in and hold the reset button while powering on the router. Keep it pressed in for 15 seconds then upload the netgear firmware.
Then do this using tftpd32, you can download it and download the netgear firmware, unzip it and use that with the tftpd32 program or whichever tftp program you like.
Turn the router off. Press in and hold the reset button while powering on the router. Keep it pressed in for 15 seconds then upload the netgear firmware.
Then do this using tftpd32, you can download it and download the netgear firmware, unzip it and use that with the tftpd32 program or whichever tftp program you like.
I'll update you as soon as results show.
I tried to do it that way just now, the upgrading bar fills 3/4 of the bar but returns error. "Unable to get responses from the server." I did as instructed on netgear site, still returned error.
I used multiple firmware's the only one that was the closest to completing was the Stock Firmware. 3.5/4 of the bar filled up. Although it returned with the same error message.
Turn the router off. Press in and hold the reset button while powering on the router. Keep it pressed in for 15 seconds then upload the netgear firmware.
Then do this using tftpd32, you can download it and download the netgear firmware, unzip it and use that with the tftpd32 program or whichever tftp program you like.
I'll update you as soon as results show.
I tried to do it that way just now, the upgrading bar fills 3/4 of the bar but returns error. "Unable to get responses from the server." I did as instructed on netgear site, still returned error.
I used multiple firmware's the only one that was the closest to completing was the Stock Firmware. 3.5/4 of the bar filled up. Although it returned with the same error message.
Have you tried to connect to router with simple telnet connection?
