Posted: Mon Jan 23, 2017 21:22 Post subject: Re: 3.2
NiTrus wrote:
3.2....version#'s went away on top? on purpose?
Make sure this is set in config: _setupWebIndex="index.html"
Stop Y3 and clean out /tmp/www
Bit me too. _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
Joined: 25 Dec 2010 Posts: 295 Location: Twin Cities, MN
Posted: Tue Jan 24, 2017 23:41 Post subject: Re: 3.2
ddaniel51 wrote:
NiTrus wrote:
3.2....version#'s went away on top? on purpose?
Make sure this is set in config: _setupWebIndex="index.html"
Stop Y3 and clean out /tmp/www
Bit me too.
thx ddaniel51..
using _useTMangle=1 didnt work for my router...had to turn it off..work for anyone else? _________________ NETGEAR R9000 | RT | 40134 NETGEAR R7800 | AP | 40134
Posted: Wed Jan 25, 2017 17:06 Post subject: Fresh Install of YAMon, but data missing on UI
I am newbie here. I installed the latest version of YAMon from http://usage-monitoring.com/download.php on TP-LINK WDR3600 with DD-WRT flashed, but I notice the data never loads on http://192.168.1.1/user/index.html . It only shows the current devices connected and router load. The data folder /opt/YAMon3/data/2017/01 contains these files with current timestamp
2017-01-01-mac_data.js
2017-01-25-hourly_data.js
This is a fresh install on YAMon.
I even tried various DD-WRT builds, but YAMon did not load data on any of the builds.
The logs do not show any errors as such.
Any help in regards to fixing the issue would be greatly appreciated.
Posted: Wed Jan 25, 2017 17:18 Post subject: Re: Fresh Install of YAMon, but data missing on UI
pprabhu wrote:
I am newbie here. I installed the latest version of YAMon from http://usage-monitoring.com/download.php on TP-LINK WDR3600 with DD-WRT flashed, but I notice the data never loads on http://192.168.1.1/user/index.html . It only shows the current devices connected and router load. The data folder /opt/YAMon3/data/2017/01 contains these files with current timestamp
2017-01-01-mac_data.js
2017-01-25-hourly_data.js
This is a fresh install on YAMon.
I even tried various DD-WRT builds, but YAMon did not load data on any of the builds.
The logs do not show any errors as such.
Any help in regards to fixing the issue would be greatly appreciated.
Thank you
Thanks for your post - I had literally just registered an account to pose the same question/issue.
Mine is a fresh install on clean formatted thumb drive on a Netgear R6300 - I was having some problems with a particular device not being monitored properly on v3.19 so decided to just start afresh and ran into this problem - the monthly/users/settings, etc.. tabs are not present.
I have my YAMon directory in /opt/YAMon3/, drive is formatted and mounted correctly
Posted: Wed Jan 25, 2017 17:47 Post subject: Re: Fresh Install of YAMon, but data missing on UI
sfddwrt wrote:
pprabhu wrote:
I am newbie here. I installed the latest version of YAMon from http://usage-monitoring.com/download.php on TP-LINK WDR3600 with DD-WRT flashed, but I notice the data never loads on http://192.168.1.1/user/index.html . It only shows the current devices connected and router load. The data folder /opt/YAMon3/data/2017/01 contains these files with current timestamp
2017-01-01-mac_data.js
2017-01-25-hourly_data.js
This is a fresh install on YAMon.
I even tried various DD-WRT builds, but YAMon did not load data on any of the builds.
The logs do not show any errors as such.
Any help in regards to fixing the issue would be greatly appreciated.
Thank you
Thanks for your post - I had literally just registered an account to pose the same question/issue.
Mine is a fresh install on clean formatted thumb drive on a Netgear R6300 - I was having some problems with a particular device not being monitored properly on v3.19 so decided to just start afresh and ran into this problem - the monthly/users/settings, etc.. tabs are not present.
I have my YAMon directory in /opt/YAMon3/, drive is formatted and mounted correctly
Any help would be appreciated
Sorry for all of the grief... there are symlinks in /tmp/www. Where are they pointing?
Posted: Wed Jan 25, 2017 18:01 Post subject: Re: Fresh Install of YAMon, but data missing on UI
al_c wrote:
sfddwrt wrote:
pprabhu wrote:
I am newbie here. I installed the latest version of YAMon from http://usage-monitoring.com/download.php on TP-LINK WDR3600 with DD-WRT flashed, but I notice the data never loads on http://192.168.1.1/user/index.html . It only shows the current devices connected and router load. The data folder /opt/YAMon3/data/2017/01 contains these files with current timestamp
2017-01-01-mac_data.js
2017-01-25-hourly_data.js
This is a fresh install on YAMon.
I even tried various DD-WRT builds, but YAMon did not load data on any of the builds.
The logs do not show any errors as such.
Any help in regards to fixing the issue would be greatly appreciated.
Thank you
Thanks for your post - I had literally just registered an account to pose the same question/issue.
Mine is a fresh install on clean formatted thumb drive on a Netgear R6300 - I was having some problems with a particular device not being monitored properly on v3.19 so decided to just start afresh and ran into this problem - the monthly/users/settings, etc.. tabs are not present.
I have my YAMon directory in /opt/YAMon3/, drive is formatted and mounted correctly
Any help would be appreciated
Sorry for all of the grief... there are symlinks in /tmp/www. Where are they pointing?
Thx
No grief at all...without your hard work I wouldn't have ANY data at all!
Posted: Wed Jan 25, 2017 18:07 Post subject: Re: Fresh Install of YAMon, but data missing on UI
sfddwrt wrote:
al_c wrote:
sfddwrt wrote:
pprabhu wrote:
I am newbie here. I installed the latest version of YAMon from http://usage-monitoring.com/download.php on TP-LINK WDR3600 with DD-WRT flashed, but I notice the data never loads on http://192.168.1.1/user/index.html . It only shows the current devices connected and router load. The data folder /opt/YAMon3/data/2017/01 contains these files with current timestamp
2017-01-01-mac_data.js
2017-01-25-hourly_data.js
This is a fresh install on YAMon.
I even tried various DD-WRT builds, but YAMon did not load data on any of the builds.
The logs do not show any errors as such.
Any help in regards to fixing the issue would be greatly appreciated.
Thank you
Thanks for your post - I had literally just registered an account to pose the same question/issue.
Mine is a fresh install on clean formatted thumb drive on a Netgear R6300 - I was having some problems with a particular device not being monitored properly on v3.19 so decided to just start afresh and ran into this problem - the monthly/users/settings, etc.. tabs are not present.
I have my YAMon directory in /opt/YAMon3/, drive is formatted and mounted correctly
Any help would be appreciated
Sorry for all of the grief... there are symlinks in /tmp/www. Where are they pointing?
Thx
No grief at all...without your hard work I wouldn't have ANY data at all!
Posted: Wed Jan 25, 2017 18:13 Post subject: Re: Fresh Install of YAMon, but data missing on UI
pprabhu wrote:
I am newbie here. I installed the latest version of YAMon from http://usage-monitoring.com/download.php on TP-LINK WDR3600 with DD-WRT flashed, but I notice the data never loads on http://192.168.1.1/user/index.html . It only shows the current devices connected and router load. The data folder /opt/YAMon3/data/2017/01 contains these files with current timestamp
2017-01-01-mac_data.js
2017-01-25-hourly_data.js
This is a fresh install on YAMon.
I even tried various DD-WRT builds, but YAMon did not load data on any of the builds.
The logs do not show any errors as such.
Any help in regards to fixing the issue would be greatly appreciated.
Thank you
I think I can replicate this issue now... will look into a solution when I get home later today.
thanks for your patience... it looks like the LocalStorage variable (which holds all of the report settings) is not getting updated correctly ?!?!
lrwxrwxrwx 1 root root 29 Jan 25 20:58 config3.js -> /opt/YAMon3/www/js/config3.js
-rw-r--r-- 1 root root 7709 Jan 26 09:07 live_data3.js
Also when I start YAMon, I see these messages on screen:
./yamon3.2.0.sh: line 91: iptables -t mangle -I FORWARD -j YAMONv4: not found
./yamon3.2.0.sh: line 91: iptables -t mangle -I INPUT -j YAMONv4: not found
./yamon3.2.0.sh: line 91: iptables -t mangle -I OUTPUT -j YAMONv4: not found
./yamon3.2.0.sh: line 91: ftpput: not found
./yamon3.2.0.sh: line 91: ftpput: not found
./yamon3.2.0.sh: line 91: ftpput: not found
al_c wrote:
I think I can replicate this issue now... will look into a solution when I get home later today.
thanks for your patience... it looks like the LocalStorage variable (which holds all of the report settings) is not getting updated correctly ?!?!
That is great. Do let me know how I can help aiding to fix these issues. Thank you very much.
Posted: Thu Jan 26, 2017 3:47 Post subject: YAMon 3.2 - Fresh install on DD-WRT...ftpput: not found?
Code:
/opt/YAMon3/yamon3.2.0.sh: line 91: iptables -t mangle -I FORWARD -j YAMONv4: not found
/opt/YAMon3/yamon3.2.0.sh: line 91: iptables -t mangle -I INPUT -j YAMONv4: not found
/opt/YAMon3/yamon3.2.0.sh: line 91: iptables -t mangle -I OUTPUT -j YAMONv4: not found
/opt/YAMon3/yamon3.2.0.sh: line 91: ftpput: not found
/opt/YAMon3/yamon3.2.0.sh: line 91: ftpput: not found
No data being saved. Screenshots similar to those posted by others.
Javascript errors
Code:
Failed to load resource: the server responded with a status of 404 (Not Found)
yamon3.2.js?_=1485401317368:1121 Uncaught TypeError: Cannot read property '12-2016' of undefined at setMonthlyBreakdown (yamon3.2.js?_=1485401317368:1121)
Definitely worth the donation, once I managed to get it working.
NB - users upgrading from yamon3.1.x might still use http://192.168.1.1/user/yamon3.1.html until you update the value of `_setupWebIndex` in `config.file`. You might also want to delete any of the symlinks already created in /tmp/www.
Sorry for the confusion. Let me know if this helps.
Al
Last edited by al_c on Thu Jan 26, 2017 13:55; edited 1 time in total
Posted: Thu Jan 26, 2017 13:52 Post subject: Re: YAMon 3.2 - Fresh install on DD-WRT...ftpput: not found?
If you are getting the `-t mangle` error messages - e.g.,
Code:
/opt/YAMon3/yamon3.2.0.sh: line 91: iptables -t mangle -I FORWARD -j YAMONv4: not found
/opt/YAMon3/yamon3.2.0.sh: line 91: iptables -t mangle -I INPUT -j YAMONv4: not found
/opt/YAMon3/yamon3.2.0.sh: line 91: iptables -t mangle -I OUTPUT -j YAMONv4: not found
open your config.file (in /opt/YAMon3) and set `_useTMangle`='0'
If you are getting `ftpput` error messages - e.g.,
Code:
/opt/YAMon3/yamon3.2.0.sh: line 91: ftpput: not found
open your config.file (in /opt/YAMon3) and set `_enable_ftp`='0'
save the changes you made to config.file
then run `/opt/YAMon3/restart.sh`
Let me know if this helps, or not. (please let it help... please let it help!)