mobeustech
DD-WRT Novice
Joined: 28 Jan 2016
Posts: 2
|
 Posted: Fri Jan 29, 2016 1:36 Post subject: UAP to dd-wrt issues |
 |
I downloaded the firmware from the dd-wrt site and follow the directions. My putty window disconnected with "failed" in some of the output.
| Code: | BZ.v3.2.7# fwupdate.real -m UAP-DD-WRT.bin -d
Found mtd block: /dev/mtd0(u-boot)
Found mtd block: /dev/mtd1(u-boot-env)
Found mtd block: /dev/mtd2(kernel)
Found mtd block: /dev/mtd3(rootfs)
Found mtd block: /dev/mtd4(cfg)
Found mtd block: /dev/mtd5(EEPROM)
Got U-Boot variable: mtdparts = mtdparts=mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),6528k(rootfs),256k(cfg),64k(EEPROM)
Adding U-Boot partition: u-boot 9F000000 00040000
Adding U-Boot partition: u-boot-env 9F040000 00010000
Adding U-Boot partition: kernel 9F050000 00100000
Adding U-Boot partition: rootfs 9F150000 00660000
Adding U-Boot partition: cfg 9F7B0000 00040000
Adding U-Boot partition: EEPROM 9F7F0000 00010000
Calculating flash size:
Adding block: /dev/mtd0("u-boot") - size: 00040000
Adding block: /dev/mtd1("u-boot-env") - size: 00010000
Adding block: /dev/mtd2("kernel") - size: 00100000
Adding block: /dev/mtd3("rootfs") - size: 00660000
Adding block: /dev/mtd4("cfg") - size: 00040000
Adding block: /dev/mtd5("EEPROM") - size: 00010000
Total flash size: 00800000
Flash start: 9F000000
Flash end: 9F800000
Header MAGIC 'OPEN'
Current: BZ.ar7240.v3.2.7.2816.141027.1530
New ver: BZ.ar7240.v6.0.0.133900.2000
FW Part: "kernel"(1), MAGIC: 'PART', Base: 0x9F050000, DLen: 0x000E9D6E, PLen: 0x00100000
FW Part: "rootfs"(2), MAGIC: 'PART', Base: 0x9F150000, DLen: 0x0056F000, PLen: 0x00640000
Adding adjusted FW partition:
name: 'kernel'
flash_base: 0x9F050000
mem_base: 0x80002000
size: 0x00100000
entry_point: 0x80002000
data_len: 0x000E9D6E
desc_cksum: 0x00000000
file_cksum: 0x00000000
===========================
Adding adjusted FW partition:
name: 'rootfs'
flash_base: 0x9F150000
mem_base: 0xBDBDBDBD
size: 0x00640000
entry_point: 0xBDBDBDBD
data_len: 0x0056F000
desc_cksum: 0x00000000
file_cksum: 0x00000000
===========================
Signature MAGIC 'END.'
Working(1) with block: /dev/mtd0
Skipping: artificial: 0, unallocated: 0,writeable: 1024(WRITEABLE: 400, flags: C00), fw.flash_base: 9F050000 < blk->base: 9F000000 + blk->size: 40000
Copying FIS partition: 0 =>
name: 'u-boot'
flash_base: 0x9F000000
mem_base: 0xBDBDBDBD
size: 0x00040000
entry_point: 0xBDBDBDBD
data_len: 0x00040000
desc_cksum: 0xBDBDBDBD
file_cksum: 0xBDBDBDBD
===========================
Working(1) with block: /dev/mtd1
Skipping: artificial: 0, unallocated: 0,writeable: 1024(WRITEABLE: 400, flags: C00), fw.flash_base: 9F050000 < blk->base: 9F040000 + blk->size: 10000
Copying FIS partition: 1 =>
name: 'u-boot-env'
flash_base: 0x9F040000
mem_base: 0xBDBDBDBD
size: 0x00010000
entry_point: 0xBDBDBDBD
data_len: 0x00010000
desc_cksum: 0xBDBDBDBD
file_cksum: 0xBDBDBDBD
===========================
Working(1) with block: /dev/mtd2
Working(2) with block: /dev/mtd2
End check: 9F050000 + 00100000 <= 9F150000
Creating FIS partition: 2 =>
name: 'kernel'
flash_base: 0x9F050000
mem_base: 0x80002000
size: 0x00100000
entry_point: 0x80002000
data_len: 0x000E9D6E
desc_cksum: 0x00000000
file_cksum: 0x00000000
===========================
Working(1) with block: /dev/mtd2
Skipping: artificial: 0, unallocated: 0,writeable: 1024(WRITEABLE: 400, flags: C00), fw.flash_base: 9F150000 < blk->base: 9F050000 + blk->size: 100000
Working(1) with block: /dev/mtd3
Working(2) with block: /dev/mtd3
End check: 9F150000 + 00640000 <= 9F7B0000
Creating FIS partition: 3 =>
name: 'rootfs'
flash_base: 0x9F150000
mem_base: 0xBDBDBDBD
size: 0x00640000
entry_point: 0xBDBDBDBD
data_len: 0x0056F000
desc_cksum: 0x00000000
file_cksum: 0x00000000
===========================
Working(3) with block: /dev/mtd4
Copying FIS partition: 4 <=
name: 'cfg'
flash_base: 0x9F7B0000
mem_base: 0xBDBDBDBD
size: 0x00040000
entry_point: 0xBDBDBDBD
data_len: 0x00040000
desc_cksum: 0xBDBDBDBD
file_cksum: 0xBDBDBDBD
===========================
Working(3) with block: /dev/mtd5
Copying FIS partition: 5 <=
name: 'EEPROM'
flash_base: 0x9F7F0000
mem_base: 0xBDBDBDBD
size: 0x00010000
entry_point: 0xBDBDBDBD
data_len: 0x00010000
desc_cksum: 0xBDBDBDBD
file_cksum: 0xBDBDBDBD
===========================
New FIS entries count 6
Working(1) with block: /dev/mtd0
Skipping: artificial: 0, unallocated: 0,writeable: 1024(WRITEABLE: 400, flags: C00), fw.flash_base: 9F050000 < blk->base: 9F000000 + blk->size: 40000
Copying FIS partition: 0 =>
name: 'u-boot'
flash_base: 0x9F000000
mem_base: 0xBDBDBDBD
size: 0x00040000
entry_point: 0xBDBDBDBD
data_len: 0x00040000
desc_cksum: 0xBDBDBDBD
file_cksum: 0xBDBDBDBD
===========================
Working(1) with block: /dev/mtd1
Skipping: artificial: 0, unallocated: 0,writeable: 1024(WRITEABLE: 400, flags: C00), fw.flash_base: 9F050000 < blk->base: 9F040000 + blk->size: 10000
Copying FIS partition: 1 =>
name: 'u-boot-env'
flash_base: 0x9F040000
mem_base: 0xBDBDBDBD
size: 0x00010000
entry_point: 0xBDBDBDBD
data_len: 0x00010000
desc_cksum: 0xBDBDBDBD
file_cksum: 0xBDBDBDBD
===========================
Working(1) with block: /dev/mtd2
Working(2) with block: /dev/mtd2
Unlocking /dev/mtd2(kernel) ...
Unlocking device failed: ioctl(MEMUNLOCK): Operation not supported
Writing 'kernel ' to /dev/mtd2(kernel ) ...
Writing: 0x000E9D6E bytes with offset 0x00000000
[%0 ]
Block on '/dev/mtd2' at 00000000(len: 00010000) has changes. [%6 ]
Block on '/dev/mtd2' at 00010000(len: 00010000) has changes. [%13 ]
Block on '/dev/mtd2' at 00020000(len: 00010000) has changes. [%20 ]
Block on '/dev/mtd2' at 00030000(len: 00010000) has changes. [%27 ]
Block on '/dev/mtd2' at 00040000(len: 00010000) has changes. [%34 ]
Block on '/dev/mtd2' at 00050000(len: 00010000) has changes. [%41 ]
Block on '/dev/mtd2' at 00060000(len: 00010000) has changes. [%47 ]
Block on '/dev/mtd2' at 00070000(len: 00010000) has changes. [%54 ]
Block on '/dev/mtd2' at 00080000(len: 00010000) has changes. [%61 ]
Block on '/dev/mtd2' at 00090000(len: 00010000) has changes. [%68 ]
Block on '/dev/mtd2' at 000A0000(len: 00010000) has changes. [%75 ]
Block on '/dev/mtd2' at 000B0000(len: 00010000) has changes. [%82 ]
Block on '/dev/mtd2' at 000C0000(len: 00010000) has changes. [%88 ]
Block on '/dev/mtd2' at 000D0000(len: 00010000) has changes. [%95 ]
Block on '/dev/mtd2' at 000E0000(len: 00009D6E) has changes. [%100]
End check: 9F050000 + 00100000 <= 9F150000
Creating FIS partition: 2 =>
name: 'kernel'
flash_base: 0x9F050000
mem_base: 0x80002000
size: 0x00100000
entry_point: 0x80002000
data_len: 0x000E9D6E
desc_cksum: 0x00000000
file_cksum: 0x00000000
===========================
Working(1) with block: /dev/mtd2
Skipping: artificial: 0, unallocated: 0,writeable: 1024(WRITEABLE: 400, flags: C00), fw.flash_base: 9F150000 < blk->base: 9F050000 + blk->size: 100000
Working(1) with block: /dev/mtd3
Working(2) with block: /dev/mtd3
Unlocking /dev/mtd3(rootfs) ...
Unlocking device failed: ioctl(MEMUNLOCK): Operation not supported
Writing 'rootfs ' to /dev/mtd3(rootfs ) ...
Writing: 0x0056F000 bytes with offset 0x00000000
[%0 ]
Block on '/dev/mtd3' at 00000000(len: 00010000) has changes. [%1 ]
Block on '/dev/mtd3' at 00010000(len: 00010000) has changes. [%2 ]
Block on '/dev/mtd3' at 00020000(len: 00010000) has changes. [%3 ]
Block on '/dev/mtd3' at 00030000(len: 00010000) has changes. [%4 ]
Block on '/dev/mtd3' at 00040000(len: 00010000) has changes. [%5 ]
Block on '/dev/mtd3' at 00050000(len: 00010000) has changes. [%6 ]
Block on '/dev/mtd3' at 00060000(len: 00010000) has changes. [%8 ]
Block on '/dev/mtd3' at 00070000(len: 00010000) has changes. [%9 ]
Block on '/dev/mtd3' at 00080000(len: 00010000) has changes. [%10 ]
Block on '/dev/mtd3' at 00090000(len: 00010000) has changes. [%11 ]
Block on '/dev/mtd3' at 000A0000(len: 00010000) has changes. [%12 ]
Block on '/dev/mtd3' at 000B0000(len: 00010000) has changes. [%13 ]
Block on '/dev/mtd3' at 000C0000(len: 00010000) has changes. [%14 ]
Block on '/dev/mtd3' at 000D0000(len: 00010000) has changes. [%16 ]
Block on '/dev/mtd3' at 000E0000(len: 00010000) has changes. [%17 ]
Block on '/dev/mtd3' at 000F0000(len: 00010000) has changes. [%18 ]
Block on '/dev/mtd3' at 00100000(len: 00010000) has changes. [%19 ]
Block on '/dev/mtd3' at 00110000(len: 00010000) has changes. [%20 ]
Block on '/dev/mtd3' at 00120000(len: 00010000) has changes. [%21 ]
Block on '/dev/mtd3' at 00130000(len: 00010000) has changes. [%23 ]
Block on '/dev/mtd3' at 00140000(len: 00010000) has changes. [%24 ]
Block on '/dev/mtd3' at 00150000(len: 00010000) has changes. [%25 ]
Block on '/dev/mtd3' at 00160000(len: 00010000) has changes. [%26 ]
Block on '/dev/mtd3' at 00170000(len: 00010000) has changes. [%27 ]
Block on '/dev/mtd3' at 00180000(len: 00010000) has changes. [%28 ]
Block on '/dev/mtd3' at 00190000(len: 00010000) has changes. [%29 ]
Block on '/dev/mtd3' at 001A0000(len: 00010000) has changes. [%31 ]
Block on '/dev/mtd3' at 001B0000(len: 00010000) has changes.
|
I can scan and see the UAP at 192.168.1.20 but it is inaccessible. Any ideas on how to get back to the device and or login to it? |
|
rocky13
DD-WRT User
Joined: 25 Apr 2008
Posts: 158
|
| Posted: Fri Feb 05, 2016 4:06 Post subject: |
|
| mobeustech wrote: | | I was able to tftp it back to the Ubiquiti firmware but I would like to have dd-wrt on it. Any ideas why it would not work? |
Do the following...
Copy The files UAP-DD-WRT.bin and UniFiAP-webflash-firmware.bin to C:\ (these files are located at DD-WRT download database)
Set Static to your PC NIC Card 192.168.1.10
Enter DOS mode from Windows Machine, and prepare this line tftp.exe -i 192.168.1.20 PUT c:\UAP-DD-WRT.bin but don't hit enter yet.
Put UNIFI-AP into recovery mode --> Unplug Patch Cord press and hold the reset button while reconnecting Patch Cable you will see after 20 seconds or so that the AP will start to blink Orange and Green, the AP is NOW in recovery mode. Now hit enter on your DOS Console screen. You might have to do this quickly as it may stall. So just repeat until you get the below message. When you are successful your AP should start blinking different colors rapidly and then it will reboot. When it comes back online you should have a solid and steady green light.
The unit will reboot itself after 5 minutes (you should see a solid green light when complete) when it reboots you can try accessing it's web gui.
Now you can type 192.168.1.1 in URL of browser and DDWRT is now installed
You can install the second firmware called UniFiAP-webflash-firmware.bin. Just use the web upgrade in Administration |
|
