This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29316_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ [I prefer answere in whole sentence]
Last edited by kt_haddock on Tue Mar 22, 2016 19:22; edited 3 times in total
Router: TrendNet TEW-811DRU
Firmware: r29316*
Kernel: Linux 4.4.6 #470 Tue Mar 22 07:05:08 CET 2016 armv7l
Status: Working as expected
Reset: flashed via telnet, erase nvram
Errors: Not yet
*This seems to be a significant build that has numerous major fixes (driver, buffer, wifi channels...) including all the changes in 29308 - see change-sets from 309->316 on http://svn.dd-wrt.com/
Last edited by jerrytouille on Tue Mar 22, 2016 19:33; edited 2 times in total
Router: Netgear R7000
Firmware: DD-WRT v3.0-r29316 std (03/22/16)
Kernel: Linux 4.4.6 #467 SMP Mon Mar 21 07:04:22 CET 2016 armv7l
Status: Working
Reset: No
Previous: 29308
Errors: No
No broadband mobile for us ,witch use that for WWWW.
Back to 28815 13-11 2015
use Asus 66-68 -87 AC no one work after 28815
Olso test linksys-Netgear no broadband mobile same all over
builds. Only kongs DD-WRT v3.0-r28815M kongac (01/15/16)
work between on my RT AC68U
arneande
Router: Netgear R7000
Firmware: DD-WRT v3.0-r29316 std (03/22/16)
Kernel: Linux 4.4.6 #467 SMP Mon Mar 21 07:04:22 CET 2016 armv7l
Status: Working
Reset: No
Previous: 29308
Errors: None at all (2 hours so far)
Router: Asus Rt-AC5300
Firmware: DD-WRT v3.0-r29316 std (03/22/16)
Kernel: Linux 4.4.6 #472 SMP Tue Mar 22 07:13:19 CET 2016 armv7l
Status: Works ok. Weak 2nd 5ghz signal, and no ethernet ports functioning
Reset: Yes, though web gui.
Errors: 2.5ghz: Received (RX)284 OK, 3 errors
5ghz 1: Received (RX)22341 OK, 2 errors
5ghz 2: Received (RX)0 OK, 2 errors
For the ethernet ports I tried disabling vlan 1 - 4, power cycling, reenable ports, and power cycling again with no luck.
Router: Buffalo WXR-1900DHP
Firmware: DD-WRT v3.0-r29316 std (03/22/16)
Kernel: Linux 4.4.6 #467 SMP Mon Mar 21 07:04:22 CET 2016 armv7l
Status: Working
Reset: No
Errors: No
----------------------------------------------------
***kex01 The answer is on the top of the page .
He said "shit" !
uverse 18/2
test platforms: dslreports.com, testmy.net, speedof.me, speedtest.net
Router Name: Buffalo WZR-1750DHP
Router Model: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r29316 std (03/22/16)
Kernel: Linux 4.4.6 #467 SMP Mon Mar 21 07:04:22 CET 2016 armv7l
Previous: DD-WRT v3.0-r29264 std (03/17/16)
Status: AP Working
Reset: GUI reset before Flash
Errors: WAN/LAN speed slightly erratic - improved from 29264 and 29308
29193 continues to provide most stable performance of recent builds
Router Name: Linksys EA6400
Router Model: Asus RT-AC68U
Firmware: DD-WRT v3.0-r29316 std (03/22/16)
Kernel: Linux 4.4.6 #467 SMP Mon Mar 21 07:04:22 CET 2016 armv7l
Previous: DD-WRT v3.0-r29264 std (03/17/16)
Status: VPN AP Working
Reset: GUI before flash (requires button reset if OpenVPN active)
Errors: Reports Asus RT-AC68U when OpenVPN client enabled.
2.4GHZ radio extremely weak (maybe hardware).
WAN/LAN speed slightly erratic - improved from 29264 and 29308
Router Name: Linksys E3000
Router Model: Linksys E3000
Firmware: DD-WRT v3.0-r29316 mega (03/22/16)
Kernel: Linux 3.10.101 #11987 Tue Mar 22 10:56:41 CET 2016 mips
Previous:: v3.0-24-29264 mega (03/17/16)
Status: Client Bridge Working
Reset: GUI Before and after Flash
Errors: None yet
Router: Asus RT-N16
Firmware: DD-WRT v3.0-r29316 big (03/22/16)
Kernel: Linux 2.6.24.111 #29050 Tue Mar 22 01:52:50 CET 2016 mips
Status: Work
Reset: No. Flashed via GUI from kingkong 22200M
Errors: Small
When automounting Usb-flash Disk Info is clear.
# ls -l /tmp/disktype.dump
-rw-r--r-- 1 root root 0 Jan 1 1970 /tmp/disktype.dump
And how must work "TX Power Auto"? Tx power is 30mW always as I set manual value.
.PNG
Description:
Filesize:
19.44 KB
Viewed:
7560 Time(s)
Last edited by wosk on Fri Mar 25, 2016 17:53; edited 3 times in total
Posted: Thu Mar 24, 2016 23:15 Post subject: Asus RT-AC68U
Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r29316 std (03/22/16)
Previous: DD-WRT v3.0-r29308 std (03/21/16)
Kernel: Linux 4.4.6 #467 SMP Mon Mar 21 07:04:22 CET 2016 armv7l
Previous: Linux 4.4.6 #460 SMP Mon Mar 21 06:41:17 CET 2016 armv7l
Status: ok
Reset: no
Errors: no
Uptime: 1 day, 4:46
Static Leases: 7
DHCP Server: Enabled
DHCP Daemon: DNSMasq
Operating Mode: Gateway
Static Routing: none
Interface: wl0 (G-Only)
Wireless Packet Info
RX: 3170494 OK, no error
TX: 4428934 OK, no errors
MAC Filter: Permit only listed clients
Site Survey: ok
Wviz survey: ok
Interface: wl1 (Disabled)
Router: Buffalo WZR-1750DHP
Firmware: Version DD-WRT v3.0-r29316 std (03/22/16)
Kernel: v4.4.6 #467 SMP Mon Mar 21 07:04:22 CET 2016 armv7l
Status: Working
Reset: yes 30/30/30 before not after
Errors: None so far
Uptime: 2days8hrs
So i have had the issue with DL speed being "eaten" for some unknown reason, well, this is what i did to get speeds back up....added two entries to Interface Priority in QoS, onw for WAN(vlan2) and one for LAN&WLAN(br0), both with max DL and UL speeds set at my max and with the service as unknown and Priority as maximum. This gave me full DL speed and did not interfere with my bufferbloat result.
I shared my result with a fellow member with the same issue and router as i and he expressed his results here--->https://www.dd-wrt.com/phpBB2/viewtopic.php?t=298979&postdays=0&postorder=asc&start=15
This build also has a lower ping time for all the internet speed tests i have done.
