Router: Buffalo WCR-GN
Firmware: DD-WRT v3.0-r29193 std (03/02/16)
Kernel: Linux 3.2.78 #22577 Wed Mar 2 12:09:34 CET 2016 mips
Status: stable
Reset: no
Errors:have not found
Router: Dlink DIR-810L A1
Firmware: DD-WRT v3.0-r29193 std (03/02/16)
Kernel: Linux 3.10.98 #1715 Wed Mar 2 12:21:20 CET 2016 mips
Status: unstable
Reset: no
Errors: No neighbor's wireless network can be found in client mode. And my Intel 3945ABG card cannot connect to DIR-810L via 5 GHz wireless until the "Apply settings" button is clicked without anything being changed.
Last edited by nokia007 on Thu Mar 03, 2016 19:18; edited 1 time in total
Router:F5D8235-4 v2 (N+)
Firmware: DD-WRT v3.0-r29193 std (03/02/16)
Kernel: Linux 3.2.78 #22573 Wed Mar 2 12:05:50 CET 2016 mips
Status:Hardware defect while flashing, switch died
Now I've lost my ethernet, which happened to other F5D8235-4 users before, I logged it:
removing lockfile
fischecksum: No such file or directory
use buffer size 4096
upgrade_ver[v-58.1.0] upgrade_ver[-580100] intel_ver[14108] 4712_ver[15000]
uploading [4096]uploading [8192]uploading [12288]uploading [16384]uploading [20480]uploading [24576]uploading [28672]uploading [32768]uploading [36864]uploading [40960]uploading [45056]uploading [49152]uploading [53248]uploading [57344]uploading [61440]uploading [65536]uploading [69632]function stop_pppoeserver not found
function stop_freeradius not found
freeram=[14917632] bufferram=[1835008]
The free memory is enough, writing image once.
my Intel 3945ABG card cannot connect to DIR-810L via 5 GHz wireless
Intel 3945ABG is only 2.4 GHz card, doesn't have 5 GHz capabilities
Intel 3945ABG supports 802.11a, and it's working well with another router WNDR3700 V4. I make them share the same SSID and key, power them on both, Intel 3945ABG connects to WNDR3700. Then I shut down WNDR3700, Intel 3945ABG is now able to connect to DIR-810L. If only DIR-810L is powered on, Intel 3945ABG won't connect to it. So weird.
