Support for TP-Link TL-WR810N?

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3, 4, 5  Next
View previous topic :: View next topic  
Author Message
TOMill
DD-WRT Novice


Joined: 20 Mar 2016
Posts: 15
PostPosted: Thu Mar 31, 2016 15:32    Post subject: Support for TP-Link TL-WR810N? Reply with quote
I'm currently looking for a small travel router with a build-in power supply. The TP-Link TL-WR810N would be a nice device:

http://www.tp-link.com/en/products/details/cat-9_TL-WR810N.html

Any chance of getting dd-wrt to run on this device? It basically looks like a "WR710 + mimo support" to me...
Back to top View user's profile Send private message
Sponsor
GreyDoc
DD-WRT User


Joined: 04 Jun 2015
Posts: 392
PostPosted: Thu Mar 31, 2016 16:09    Post subject: Reply with quote
https://fccid.io/pdf.php?id=2892948 has info on WR810Nv1:
CPU: 560 MHz Qualcomm Atheros QCA9531-BL3A
RAM: 64 MB Zentel A3R12E40CBF-8E
Flash: 8 MB

what is your tp-link firmware version currently on it ?
Back to top View user's profile Send private message
TOMill
DD-WRT Novice


Joined: 20 Mar 2016
Posts: 15
PostPosted: Thu Mar 31, 2016 17:23    Post subject: Reply with quote
I don't have mine yet. Just ordered the european version on Amazon along with the older WR-710 model.

Couldn't decide on which device I should use because the 710 is already supported - but MIMO on the new 810 sure would be nice.

So I can't really tell you which firmware the 810 is shippping with, I'm sorry.

What should I look for?
Back to top View user's profile Send private message
Emilfelix
DD-WRT Novice


Joined: 30 Nov 2015
Posts: 1
PostPosted: Wed May 04, 2016 11:48    Post subject: Reply with quote
My TL-WR810N says:

Firmware Version:
3.16.9 Build 150918 Rel.43453n
Hardware Version:
WR810N v1 00000000

I ordered it a few days ago...
Back to top View user's profile Send private message
TOMill
DD-WRT Novice


Joined: 20 Mar 2016
Posts: 15
PostPosted: Mon May 09, 2016 17:26    Post subject: Reply with quote
Did anyone manage to get dd-wrt working with this nice device?
Back to top View user's profile Send private message
aksingh
DD-WRT Novice


Joined: 17 Feb 2013
Posts: 26
PostPosted: Fri May 27, 2016 16:42    Post subject: Reply with quote
Some more details found below on the HW details of this model..

https://wiki.openwrt.org/toh/tp-link/tl-wr810n
Back to top View user's profile Send private message
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411
PostPosted: Tue May 31, 2016 7:30    Post subject: Reply with quote
I've modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR841ND v11, so it will flash on a TL-WR810N v1 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-29739 webflash build for TL-WR841ND v11.

Disclaimer: I haven't tested the attached builds myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.

Note: You must be logged in to be able to download the attachment.
_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX

Last edited by KrypteX on Tue Sep 20, 2016 10:37; edited 1 time in total
Back to top View user's profile Send private message
joehsmith
DD-WRT Novice


Joined: 01 Jun 2016
Posts: 3
PostPosted: Tue Jun 07, 2016 5:13    Post subject: Reply with quote
My TL-WR810N works well after flashed with the US build above.

Is there a way for me to flash it back to the original factory build or to other builds, like OpenWRT?

TIA

KrypteX wrote:
I've modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR841ND v11, so that it will flash on a TL-WR810N v1 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-29739 webflash build for TL-WR841ND v11.

Disclaimer: I haven't tested the attached builds myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.

Note: You must be logged in to be able to download the attachment.
Back to top View user's profile Send private message
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411
PostPosted: Tue Jun 07, 2016 6:08    Post subject: Reply with quote
joehsmith wrote:
My TL-WR810N works well after flashed with the US build above.

Is there a way for me to flash it back to the original factory build or to other builds, like OpenWRT?

If it works well, why do you want to do that ? Do you really want to brick it ? And OpenWrt itself is dead, if you haven't noticed...
_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Back to top View user's profile Send private message
joehsmith
DD-WRT Novice


Joined: 01 Jun 2016
Posts: 3
PostPosted: Wed Jun 08, 2016 22:14    Post subject: Reply with quote
I see. Can I flash it back to the manufacture build posted on their website?


KrypteX wrote:
joehsmith wrote:
My TL-WR810N works well after flashed with the US build above.

Is there a way for me to flash it back to the original factory build or to other builds, like OpenWRT?

If it works well, why do you want to do that ? Do you really want to brick it ? And OpenWrt itself is dead, if you haven't noticed...
Back to top View user's profile Send private message
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411
PostPosted: Thu Jun 09, 2016 5:07    Post subject: Reply with quote
joehsmith wrote:
I see. Can I flash it back to the manufacture build posted on their website?

Only if you know your way around with TFTP + you need an image without the bootloader (stripped firmware).

Or you want to risk a webrevert...
_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Back to top View user's profile Send private message
TOMill
DD-WRT Novice


Joined: 20 Mar 2016
Posts: 15
PostPosted: Mon Jun 13, 2016 15:07    Post subject: Reply with quote
KrypteX wrote:
I've modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR841ND v11, so that it will flash on a TL-WR810N v1 running stock TP-Link firmware.

Finally got mine today. But the model is TL-WR810(EU) v1.1. and not v.1?! Should the image still work?

KrypteX wrote:
And OpenWrt itself is dead, if you haven't noticed...

In what way is OpenWrt dead? I was looking at their build for the WR810N as well and it looks like it's still maintained.
Back to top View user's profile Send private message
LostInIgnorance
DD-WRT Novice


Joined: 30 Sep 2009
Posts: 9
PostPosted: Mon Jun 13, 2016 18:08    Post subject: TL-WR810N missing OpenVPN? Reply with quote
I just flashed the firmware from factory using the above link. I am trying to get it setup and I am missing the OpenVPN settings menu. I have tried upgrading to the TL-WR841ND v11 29837 build and the same results. Is OpenVPN not supported on this device?
Back to top View user's profile Send private message
LostInIgnorance
DD-WRT Novice


Joined: 30 Sep 2009
Posts: 9
PostPosted: Tue Jun 14, 2016 18:04    Post subject: Reply with quote
Does one of the developers know when they might be able to add this to the supported hardware?
Back to top View user's profile Send private message
joehsmith
DD-WRT Novice


Joined: 01 Jun 2016
Posts: 3
PostPosted: Wed Jun 15, 2016 3:07    Post subject: Re: TL-WR810N missing OpenVPN? Reply with quote
LostInIgnorance wrote:
I just flashed the firmware from factory using the above link. I am trying to get it setup and I am missing the OpenVPN settings menu. I have tried upgrading to the TL-WR841ND v11 29837 build and the same results. Is OpenVPN not supported on this device?


Seemingly not official yet. I tried the OpenWRT mod approach described on
https://forum.openwrt.org/viewtopic.php?id=65018, but never succeeded.
Back to top View user's profile Send private message
Goto page 1, 2, 3, 4, 5  Next Display posts from previous:    Page 1 of 5
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum