install on spare wndr37090v4
reset before & after
live WAN plugged into main router
changed some settings thru GUI
disable wireless on both radio
set time zone
change theme
disable Query DNS in Strict Order
disable No DNS Rebind
enable SSHD
enable remote ssh
set WAN QOS 2048/2048 kbps -- geezzz... it works
security - enable limited telnet & limited SSH
It appears that any submenus in 'Status' will break httpd
It shows in processes to start back (the first time) but don't work and then he dies for good not to return until you do a reset/erase nvram
syslog aint giving up anything about this
done all this few times till got tired playin with it
So if you install over a good working build and don't muck w/anything or don't go to a 'status' page you might be okeydokey -
FYI all status functions in GUI work just fine in main router w/29440 but haven't changed any settings since few builds ago --
Router: TPLINK WR1043ND V2 (2.1)
Firmware: DD-WRT v3.0-r29440 std (04/11/16)
Kernel: Linux 3.18.30 #10753
Status: OK (standard router/wireless mode/20mhz only/No QOS)
Reset: No. Web upgrade from previous build.
Errors: None so far
CPU on unit: Qualcomm Atheros QCA9558 ver 1 rev 1.0 (0x1130)
Seems ok here. Clicking on various items within status tab (previous month/bandwidth switch to bytes/bits/site survey) appear to be working.
Router: TPLINK WR1043ND V2 (2.1)
Firmware: DD-WRT v3.0-r29440 std (04/11/16)
Kernel: Linux 3.18.30 #10753
Status: OK (standard router/wireless mode/20mhz only/No QOS)
Reset: No. Web upgrade from previous build.
Errors: None so far
CPU on unit: Qualcomm Atheros QCA9558 ver 1 rev 1.0 (0x1130)
Seems ok here. Clicking on various items within status tab (previous month/bandwidth switch to bytes/bits/site survey) appear to be working.
Thank You DD-WRT devs!
Do you use cron? I'm on the March 7 build because it didn't seem to work on my 1043 with the last few.
Edit - I got curious and flashed. It appears to be working again.
Last edited by mwbuss8 on Mon Apr 11, 2016 17:57; edited 1 time in total
WNDR3700 V4
It appears that any submenus in 'Status' will break httpd
It shows in processes to start back (the first time) but don't work and then he dies for good not to return until you do a reset/erase nvram
syslog aint giving up anything about this
done all this few times till got tired playin with it
So if you install over a good working build and don't muck w/anything or don't go to a 'status' page you might be okeydokey -
FYI all status functions in GUI work just fine in main router w/29440 but haven't changed any settings since few builds ago --
Yeah, same problem here. The upgrade appears to work, but as soon as you have to log back in to the router, the status page is mucked up. I'm sticking with r29346 as my current LAN config has my WNDR3700 running with WiFi disabled. _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Posted: Tue Apr 12, 2016 7:29 Post subject: Re: Not good.
Darknlight55 wrote:
Router: Archer c7 v2
Firmware:29440
Kernel: n/a
Status: httpd gui broken
Reset: no
Errors:httpd gui seems to be broken not sure how to fix the issue. The gui appears as broken html code.
Update:reverted to firmware 29264 as it seems to be the most stable version 3.0 firmware recently.
Same here, but I had to reset since I already had the Status Page bug.
Looks like it happens when I set VHT80 on the 5GHz antenna.
EDIT: I can confirm this. Setting VHT80 brings this error.
Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
Posted: Tue Apr 12, 2016 9:04 Post subject:
Router Model: TPLINK WR1043ND V2
Firmware Version: DD-WRT v3.0-r29440 std (04/11/16)
Kernel Version:Linux 3.18.30 #10753 Mon Apr 11 03:24:19 CEST 2016 mips
reset : yes x2
status : so far working for 7 days great build for me !
router is fully accessible and if tested it heavy DL/UP,
WI-FI to LAN(100mb) traffic, torrents, streaming, ad blocking, usb share, home networks, sub netw's, printer share, guest networking, cron, local DNS, forwarder,
all working so far so good
web update via 29362 _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Thu Apr 21, 2016 8:52; edited 1 time in total
Posted: Tue Apr 12, 2016 10:50 Post subject: Re: Not good.
Darknlight55 wrote:
Router: Archer c7 v2
Firmware:29440
Kernel: n/a
Status: httpd gui broken
Reset: no
Errors:httpd gui seems to be broken not sure how to fix the issue. The gui appears as broken html code.
Update:reverted to firmware 29264 as it seems to be the most stable version 3.0 firmware recently.
My c7 v2 is good so far at about 20hrs. Maybe its related to an active feature? Mine is an AP and nothing else at the moment.
