Router:Buffalo WZR-1750DHP
Firmware: r29516
Kernel: Linux 4.4.7-rc1 #604 SMP Mon Apr 11 05:42:18 CEST 2016 armv7l
Status: No access to WAN
Reset: Yes
Errors: I get IP from ISP but no access to Internet, I think is a NAT problem because I logged to my rig with ssh and i can to do a ping to www.yahoo.com (for example) from router.
Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r29519 std (04/25/16)
Kernel: Linux 4.4.8 #669 SMP Sun Apr 24 06:48:35 CEST 2016 armv7l
Errors: Applications cannot configure port forwarding via the UPnP Service (worked OK in r29440, but not in r29495).
The upnp service does not run:
root@dd-wrt:/tmp/var/log# startservice upnp
root@dd-wrt:/tmp/var/log# ps|grep pnp
18442 root 1176 S grep pnp
root@dd-wrt:/tmp/var/log# cat messages|grep pnp
Apr 28 14:08:00 dd-wrt user.info : upnp : upnp daemon successfully started
root@dd-wrt:/tmp/var/log# find / -name *pnp*
/tmp/services/upnp.start
Update 17 May:
Issue resolved. Applications can configure port forwarding via the UPnP Service
Last edited by eywong on Wed May 18, 2016 5:18; edited 1 time in total
Router Model: Asus RT-AC66U
Firmware Version: DD-WRT v3.0-r29519 giga (04/25/16)
Kernel Version: Linux 3.10.101 #12443 Mon Apr 25 09:37:11 CEST 2016 mips
Status: Okay
Reset: No
Errors/issues: None so far
Router Model: Asus RT-N66U
Firmware Version: DD-WRT v3.0-r29519 big (04/25/16)
Kernel Version: Linux 3.10.101
Reset: No
Errors/issues: found a problem with MikroTik RouterBOARD 750. Mikrotik as primary router set dhcp. N66U wan settings set to automatic dhcp. Internet disappear sometimes, 15 minutes no internet 2 hours on or even could all day work fine. When was no internet I try to set static ip, still no internet, but I can’t set automatic ip back, reboot don’t help. When I flashed back to 29085 everything works fine, static ip changes to automatic with no problem, internet don’t diaspers. I found that problem exist from build 29134.
Other issues (as in r29440):
- EZsetup button still isn't working for turning wifi on/off. Last time it worked was in one of the versions in last quarter of 2015.
- Would it be possible to have the default setting for wifi as disabled? Now the router is an open access point whenever one chooses to reset to default.
Posted: Mon May 02, 2016 18:28 Post subject: Re: New build: DD-WRT 29519 - 2016/04/25
Your reports for Broadcom units are greatly appreciated !
Router: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r29519 std (04/25/16)
Kernel: Linux 4.4.8 #669 SMP Sun Apr 24 06:48:35 CEST 2016 armv7l
Status: Sofar stable, working with setting up OpenVPN
Reset: Yes, SW loaded with serial cable CLI (wget.. and write file linux..)
Errors: None
Other issues (as in r29440):
- EZsetup button still isn't working for turning wifi on/off. Last time it worked was in one of the versions in last quarter of 2015.
- Would it be possible to have the default setting for wifi as disabled? Now the router is an open access point whenever one chooses to reset to default.
Name only router that has that, is pointless default it to disabled, apart from specific cases. Also you would be forcing people to use LAN to configure the router.
Router Model: Asus RT-AC66U
Firmware Version: DD-WRT v3.0-r29519 giga (04/25/16)
Kernel Version: Linux 3.10.101 #12443 Mon Apr 25 09:37:11 CEST 2016 mips
Status: Okay
Reset: No
Errors/issues: Semi-Problem with uPNP
I deleted all the previous uPNP, and only ones that register back are the torrent upnp.
I have a video conferencing unit and that usually work with uPNP and now basically I have to open forwarding ports.
***UPDATE: After a factory reset, and then manually reconfiguring the UPNP service works. Factory reset and then reload the configuration did not _________________ ASUS RT-AC3200 - Deployed Client's site
ASUS RT-AC5200 - Merlin
ASUS RT-AX88U - Merlin
Router: Linksys EA6500V1
both routers are working for few days already without any issues.
I loaded firmware without reset. _________________ Netgear R9000 main router
RAX80 as AP
Router: Linksys E1700 v.1
Firmware: DD-WRT v3.0-r29519 mini (04/25/16)
Kernel: Linux 4.4.8 #672 Mon Apr 25 06:06:27 CEST 2016 armv7l
Status: Working
Reset: yes - Upgraded via Web GUI from DD-WRT
Errors: None
Router: Dlink-DIR860L-A1
Firmware: DD-WRT v3.0-r29519 std (04/25/16)
Kernel: Linux 4.4.8 #669 SMP Sun Apr 24 06:48:35 CEST 2016 armv7l
Status: Working
Reset: Yes
Errors: losing WiFi connection need to restart to connect
Wan Light stays ON even if the cable is removed.
Thank you _________________ Dlink-DIR860L-A1
DD-WRT v3.0-r30560M kongac (09/05/16)
Last edited by SuperSaiyajin on Sat May 07, 2016 4:12; edited 1 time in total
Router: Asus RT-AC66U
Firmware: DD-WRT v3.0-r29519 giga (04/25/16)
Kernel: Linux 3.10.101 #12443 Mon Apr 25 09:37:11 CEST 2016 mips
Status: OK
Reset: Yes via GUI
Errors: None
IPV6 DHCPv6 PD: working fine
2.4GHz 20MHz AP: working fine
5GHz 40MHz AP: unused
WAN/LAN ports: working fine
ISP 30/6 bandwidth: 30.08/6.93 _________________ [Broadcom] Asus rt-ac66u r35531 ('66 should only be factory reset through the DD UI)
Fix RT-AC66U "wl1 [2.4 GHz TurboQAM]". DD-WRT failsafe UI @ http|https://169.254.255.1/
Last edited by hubermania on Mon May 09, 2016 18:18; edited 1 time in total
