WDS AP on D-Link 860L B1

Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware
Author Message
karesch
DD-WRT Novice


Joined: 02 May 2016
Posts: 1
Location: Hungary

PostPosted: Sat May 14, 2016 11:14    Post subject: WDS AP on D-Link 860L B1 Reply with quote
Hi Folks,

I tested the both the official version (r25979) and snaphot (r29519) for the 860L B1. The router seems to be working fine, and actually slightly faster than the factory firmware. However, I could not set any of the wireless radios to AP WDS mode (in Wireless/Basic settings/Wireless Mode). There is no WDS AP nor WDS Station item in the drop down list.

Am I doing something wrong? Or there is on other way to set the router to WDS AP mode?

I realized that the menu items are a bit tricky on this page, especially the channel and channel width settings are depending on each other, and one has to play a bit to set what he/she wants, but this does not seems to be connected to the above WDS issue (eg: if you set the channel and the channel width, the channel will be set to Auto, and you have to OK the settings and come back to set the channel, etc).

Thanks,
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum