Posted: Wed May 25, 2016 10:57 Post subject: Re: New build: DD-WRT 29739 - 2016/05/19
Router: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r29739 std (05/19/16)
Kernel: Linux 4.4.10 #810 SMP Wed May 18 06:40:08 CEST 2016 armv7l
Status: Running stable
Reset: No
Errors: None AFAIK
This time I tried upgrading without the laborous re-configuration from scratch, I know this is exactly against the recommendations, but it seems that even OpenVPN is working nicely though. Thank you guys once again for good work!
Posted: Wed May 25, 2016 11:07 Post subject: Re: New build: DD-WRT 29739 - 2016/05/19
Router: Buffalo WLI-H4-D1300
Firmware: DD-WRT v3.0-r29739 giga (05/19/16)
Kernel: Linux 3.10.101 #12638 Thu May 19 09:08:50 CEST 2016 mips
Status: Running stable. Surprisingly this has other linux version than my D1750 running the same fw release.
Reset: Yes
Errors: None AFAIK
Running nicely. This router is a slave for 1750 and uses 5GHz as 'wan' that is client bridge, then 2.4 Hz as AP. The master has also DHCP server. Anyway this seems pretty stable release and the functionality is amazing, What would be nice is to have the Web-Gui help pages a bit better in sync with the parameters that are adjustable in the menus. Anyway, it is a good reason to find out what the myriads of knobs and throttles in this fabulous build actually mean, and just try them in practice to see what happens... Anyway, thank you guys for excellent work!!!
Router: Asus RT-N18U
Firmware: DD-WRT v3.0-r29739 std (05/19/16)
Kernel: Linux 4.4.10 #814 Thu May 19 05:32:22 CEST 2016 armv7l
Status: Working
Reset: No
Errors: Yes, please see below.
- LAN LED stays always off and WAN LED stays always on (even if cable is physically disconnected from the port)
- http://svn.dd-wrt.com/ticket/5183
Firmware: dd-wrt.v24-29739_NEWD-2_K2.6_big-nv60k.bin DD-WRT v3.0-r29739 big (05/19/16)
Kernel: Linux 2.6.24.111 #29691 Thu May 19 00:42:53 CEST 2016 mips
Status: LAN and Wifi work (Wifi needs tweaking)
Reset: 30/30/30 reset, flashed new FW, waited 5min (browser doesnt respond), unplugged for 10 sec, plug back in, wait 2min, 30/30/30 reset, power cycle, wait 1min to get to router screen.
Errors: Initially Wifi N-only download is less than 1mbps. It was this issue linked below and verified with Wireshark:
Comcast download speed fix for Linksys eSeries
http://www.dd-wrt.ca/wiki/index.php/Comcast_download_speed_fix_for_Linksys_eSeries
After adding the startup/firewall scripts, using N-only, able to get Wifi 45mbps download, while the LAN sees full 80mbps from a speedtest.
RT-N66U. Same shit going on n66u when get internet from MikroTik RouterBOARD 750 via dhcp, but on latest 29739 i can set static ip and back on dhcp without a problem. Sometimes no internet, syslog shows nothing. Any ideas how i can see that bug in logs?
There is reasons to believe that this problem has long been present. There is a problem that no internet excatly 30 seconds than it shows up, i can ping 192.168.1.1 i can enter and see that wan traffic monitor shows no inbound traffic.
Router NameLinksys
Router ModelAsus RT-AC68U
Firmware Version DD-WRT v3.0-r29739 std (05/19/16)
Kernel VersionLinux 4.4.10 #810 SMP Wed May 18 06:40:08 CEST 2016 armv7l
MAC AddressC8:D7:19:XX:XX:XX
Hostname
WAN Domain Name
LAN Domain Name
Current TimeFri, 27 May 2016 19:37:48
Uptime19 min
Reset :0
Error : Web GUI First attempt fails, success second time. Actual router is Linksys EA6300 V1, mis-identified as Asus RT-AC68U.
Used as repeater, wifi not tested.
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r29739 std)
Kernel: Linux 4.4.10 #810 SMP Wed May 18 06:40:08 CEST 2016 armv7l
Status: Working
Reset: NONE
Notes on configuration:
FTP server
DNSMasq
USB v3.0
DHCP reservation
Errors:
1. kern.warn kernel: br0: received packet on vlan1 with own address as source
address
otherwise None
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r29739 std)
Kernel: Linux 4.4.10 #810 SMP Wed May 18 06:40:08 CEST 2016 armv7l
Status: Working
Reset: NONE
Notes on configuration:
DNSMasq
Errors:
1. kern.warn kernel: br0: received packet on vlan1 with own address as source
address
otherwise None
After a week of uptime the routers are not responding to ssh, ftp, telnet, or web interface.... I have to manually cycle the power. The system is still routing... Anyone else have this problem?
My atheros based routers do not have this problem only the broadcom ....
Posted: Wed Jun 01, 2016 18:06 Post subject: Router: Asus RT-AC68R
Router: Asus RT-AC68R
Firmware: DD-WRT v3.0-r29739 std (05/19/16)
Kernel: Linux 4.4.10 #810 SMP Wed May 18 06:40:08 CEST 2016 armv7l
Status: Running Stable
Reset: No
Errors: 5Ghz Light for wifi not turning on
Opened a ticket already, was closed within minutes, pointing to a duplicate ticket. Pull up the duplicate ticket that was opened a year ago, and saw that it is marked "Wont Fix", which is a little frustrating. However, the router is working fine other that that one problem that I saw.
Router Model - Netgear EX6200
Firmware Version - DD-WRT v3.0-r29739 mini (05/19/16)
Kernel Version - Linux 4.4.10 #811 SMP Thu May 19 05:23:36 CEST 2016 armv7l
Status: Running more or less stable
Reset: No
Errors: 2.4 and 5 GHz leds always red
dmesg - Error creating gpio class
Using as wireless repeater
Some issues with wireless clients connectivity using WPA2-AES.
If wl0 disconnects wireless clients on wl0.1 are being kicked.
Some dmesg errors:
dmesg - nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
dmesg - Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
brcmnand: found no supported devices
dmesg - NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
dmesg - bcmsflash: squash filesystem found at block 26
Creating 6 MTD partitions on "bcmsflash":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000ff0000 : "linux"
0x0000001a0000-0x0000007d0000 : "rootfs"
0x0000007d0000-0x0000007f0000 : "ddwrt"
0x0000007e0000-0x0000007f0000 : "board_data"
0x0000007f0000-0x000000800000 : "nvram"
nflash: found no supported devices
Router: Asus RT-AC66U
Firmware: DD-WRT v3.0-r29739 giga (05/19/16)
Previous: DD-WRT v3.0-r29621 giga (05/10/16)
Kernel: Linux 3.10.101 #12630 Thu May 19 09:03:34 CEST 2016 mips
Status: OK
Reset: Yes via GUI
Errors: None
IPV6 DHCPv6 PD: OK after reboot
WAN/LAN ports: OK
2.4GHz 20MHz AP: OK
5GHz 40MHz AP: unused
Site Survey: OK
Wiviz Survey: OK
ISP 30/6 bandwidth: 30/6
CPU Temperature: WL0 46.0°C, WL1 unused _________________ [Broadcom] Asus rt-ac66u r35531 ('66 should only be factory reset through the DD UI)
Fix RT-AC66U "wl1 [2.4 GHz TurboQAM]". DD-WRT failsafe UI @ http|https://169.254.255.1/
Router: RT-N16
Firmware: dd-wrt.v24-29739_NEWD-2_K3.x-big-RT-N16
Kernel: Linux 3.10.101 #12642 Thu May 19 09:12:40 CEST 2016 mips
Status: Working
Reset: NONE
Came from 28211, short term (60 minutes) no issues. Will report back if anything odd starts happening after more uptime. _________________ WRT54GL modded to 32MB DRAM and 16MB Flash.
Firmware: dd-wrt.v24-29739_NEWD-2_K2.6_mega-nv60k.bin
Linux e4200b 2.6.24.111 #29692 Thu May 19 00:44:04 CEST 2016 mips DD-WRT
Status: Working and stable. Just a few issues per below
Wifi 2.4 and 5Ghz stable
openvpn works
vpnc works
As always I seem to have issues with access lists w/r to time on/off. ie after a reboot it seems to work for a day or so but then no longer switches from on to off or vice versa. Bit hard to track really.
Also I can't seem to get QoS working to throttle bandwidth on a guest wifi network. I could get it to with r28211 and can with r30016 but I think that might be because I used K3.X in those cases. Is this a 2.6 vs 3.X thing?