Your reports for Qualcomm/Atheros units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build. Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
Joined: 24 Jan 2016 Posts: 130 Location: Midwest, US
Posted: Mon Jul 25, 2016 12:12 Post subject:
Router: Buffalo WZR-600DHP
Firmware: 30284
Kernel: 3.10.102 #27349 Mon Jul 25 01:08:05 CEST 2016 mips DD-WRT
Status: OK
Reset: No
Errors: None
Upgrade: web ui from 30260
Uptime: 22 minutes
Main home router + guest wireless.
QoS HFSC/FQ_CODEL. No other settings or services.
So far so good, a couple of bufferbloat tests with excellent results.
2.4G/5G work fine, no errors. _________________ Buffalo WZR‑600DHP (WZR-HP-AG300H)
WNDR3700 V4
DD-WRT v3.0-r30284 (07/25/16)
Linux 3.18.37 #493 Mon Jul 25 03:10:42 CEST 2016 mips
~ BAD ~
Install on live main router - bootloop
Reset with nothing but computer attached. Router in default setting and
enable QOS without input in any other fields and router goes into bootloop
seems about same as 30260
'bout all I know
previous build before 30284 install ¬
DD-WRT v3.0-r30016 std (06/24/16) - very good build -
Linux 3.18.35 #13662 Fri Jun 24 03:12:24 CEST 2016 mips
Clone WAN MAC
QOS WAN / HTB, FQ_CODEL, SYN, FIN, RST, 18328/17128
QOS interface priority ath0.1 7328/5328 (setting this as br1 don't work)
Recursive DNS
DHCP / DNSMasq
30 Static leases
7 Port Range Forwards
2.4 & 5 GHz (both HT40)
Guests on ath0.1 as br1
Target DNS on br1
VPN Passthru
LAN Domain
SAMBA Share
SSH (local & remote)
----
30284 is still too big to flash these routers ¬
e2100l-firmware.bin
wrt160nl-firmware.bin
8,025,088 bytes
Tp-Link 1043 V3 and Tp-Link 841ND v9
DD-WRT v3.0-r30284 (07/25/16)
Linux 3.18.37 #493 Mon Jul 25 03:10:42 CEST 2016 mips
[color=red]~ BAD ~[/color]
Install on live main routers - bootloop
I installed the latest firmware, DD-WRT version v3.0-r30284 std (07/25/16), of Tp-Link 841ND v9 and Tp-Link 1043ND v3.
The problem if by chance get a configuration error, however trivial the router begins to boot up in an infinite loop. In the case of the 841ND I managed to restore a saved cfg and replace the router but in the case of 1043ND, after a large number of attempts have been forced to apply webrevert to have a stable configuration. We currently expect to have some feedback for 1043ND before trying to install dd-wrt again.
I wait a few suggestions.
Yeah, not even going to test this one, didn't test the previous one either. Weird stuff going on.
The funny (or sad take your pick) thing is that for 3.10.x and 4.4.x this build has gotten real solid response near as I can tell. I know I am running it on a 3.10 machine that's working great but my other router is an 841v9 which runs 3.18 so not touching that guy.
