Joined: 25 Jun 2014 Posts: 142 Location: São Paulo - Brazil
Posted: Thu Aug 18, 2016 16:41 Post subject:
Router: TP-Link TL-WR841ND v9
Firmware: DD-WRT v3.0-r30432 std (08/16/16)
Kernel: Linux 3.18.38 #1475 Tue Aug 16 05:30:46 CEST 2016 mips
Reset: No
Status: OK
Reset: No
Errors: No
Issues: Wi-fi signal shows a bit high
Live: http://wizard-dns.vasco.srv.br
WNDR3700 V4
DD-WRT v3.0-r30432 std (08/16/16)
Linux 3.18.38 #1497 Tue Aug 16 06:04:13 CEST 2016 mips
.....looks like the GUI memory quirk has been fixed --
That's bull, you don't know what you're talking 'bout, it's just like last build!
When fairly calm inactive goes to -0- but increases under a load
What is inactive RAM anyway?
And why do you think it shouldn't do that?
Router: Linksys EA8500
Firmware: DD-WRT v3.0-r30432 std (08/16/16)
Kernel: Linux 3.18.38 #99 SMP PREEMPT Sun Aug 14 14:14:08 CEST 2016 armv7l
Status: OK
Reset: No
Errors: None
Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
Posted: Sat Aug 20, 2016 11:56 Post subject:
Router Model -TPLINK WR1043ND V2
Firmware Version -DD-WRT v3.0-r30432 std (08/16/16)
Kernel Version Linux 3.18.38 #1481 Tue Aug 16 05:37:09 CEST 2016 mips
Router Model - TP-Link TL-WR740N v4
Firmware Version - DD-WRT v3.0-r30432 std (08/16/16)
Kernel Version - Linux 3.10.102 #28957 Tue Aug 16 05:03:44 CEST 2016 mip
Reset: yes x2
Status: ok ok , no issues with inactive RAM
Errors: http://svn.dd-wrt.com/ticket/5475
update via WEB inf 30016 > 30432 _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
to see what it reports as TX speed (and ath1 for the 5 GHz)? What I see is the GUI is not reporting correct TX bitrates but RX bitrates are correct and match the iw command. The iw command does show correct TX bitrates.
with all do my respect, but so far i don't have 5Ghz (AC) on my router....see the ticket _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
with all do my respect, but so far i don't have 5Ghz (AC) on my router....see the ticket
My reply was regarding that ticket. That ticket (#5475) you reference says the TX speed is very low compared to the RX speed and nothing about a non-functional radio. My reply was indicating that the GUI is incorrectly reporting the TX bitrate while the iw command shows the correct TX bitrate. If you have a different ticket than #5475, please include a reference to that ticket.
Joined: 24 Jan 2016 Posts: 130 Location: Midwest, US
Posted: Sun Aug 21, 2016 13:23 Post subject:
Update: really bad bufferbloat performance.
QoS enabled: FQ_CODEL
Went from consistent A/A+ test results here https://www.dslreports.com/speedtest down to "C".
Confirmed by running basic tests of running speedtests and continuous pings, RTT averages vary wildly with this version.
Went back to 30356, then up to 30385, both perform excellent.
It seems this regression was introduced here:
Posted: Mon Aug 22, 2016 3:31 Post subject: TP-Link TL-WR941ND V6 not working
Router: TP-Link TL-WR941ND V6
Firmware: DD-WRT v3.0-r30432 std (08/16/16)
Kernel: Linux 3.18.38 #1497 Tue Aug 16 06:04:13 CEST 2016 mips
Status: Not working
Reset: YES
Errors: All switch ports and the WAN port are not working. They can't be assigned IP Address. Routing is not working.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Mon Aug 22, 2016 5:43 Post subject:
Psyxroid wrote:
Update: really bad bufferbloat performance.
QoS enabled: FQ_CODEL
Went from consistent A/A+ test results here https://www.dslreports.com/speedtest down to "C".
Confirmed by running basic tests of running speedtests and continuous pings, RTT averages vary wildly with this version.
Went back to 30356, then up to 30385, both perform excellent.
It seems this regression was introduced here:
Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
Posted: Mon Aug 22, 2016 6:39 Post subject:
PeteSL wrote:
Alozaros wrote:
with all do my respect, but so far i don't have 5Ghz (AC) on my router....see the ticket
My reply was regarding that ticket. That ticket (#5475) you reference says the TX speed is very low compared to the RX speed and nothing about a non-functional radio. My reply was indicating that the GUI is incorrectly reporting the TX bitrate while the iw command shows the correct TX bitrate. If you have a different ticket than #5475, please include a reference to that ticket.
tx bitrate: 54.0 MBit/s MCS 14
rx bitrate: 150.0 MBit/s MCS 7 40MHz short GI
expected throughput: 43.303Mbps
i do also notice my upload is impaired a bit !!
apart of that applying changes from GUI breaks local DNS
names _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
I have a laptop client with a realtek 8821E AC controller. I get constant disconnects about every 5-7 minutes. I have tried all the new/old drivers on the ASUS website. taken my channel width to 20mhz and tried a whole host of different WiFi settings to no avail.
None of my other wireless clients have disconnect issues, but none are a AC class controller.
any ideas whats wrong? Didn't start happening until the 3xxxx series of firmware.
