Web UI upgrade: OK
Reset: No
Errors: It seams is something with free memory. With one comp with eth connection and about no activity the free memory status was fall to 38% for about 6 min after reboot.
It may be OK, but it not used for caching or buffers.
Joined: 24 Jan 2016 Posts: 130 Location: Midwest, US
Posted: Sat Sep 10, 2016 2:25 Post subject:
Router: Buffalo WZR-600DHP
Firmware: r30605 std (09/09/16)
Kernel: 3.10.103 #796 Fri Sep 9 01:46:37 CEST 2016 mips DD-WRT
Status: OK
Reset: No
Errors: None
Web upgrade from r30385
Uptime 24 minutes.
Excellent QoS/bufferbloat performance, even better than r30385
After 3 broken builds (for me anyway), 30432 and beyond, this one works great so far.
I believe Kong sprinkled some magic dust on FQ_CODEL/HFSC/HTB
Really appreciate it, awesome stuff.
My test results below, getting consistent A+ performance, couldn't be any happier.
Tested HFSC so far, will report on HTB later.
Linksys EA8500
DD-WRT v3.0-r30605 std (09/09/16)
Linux 3.18.41 #104 SMP PREEMPT Wed Sep 7 13:12:34 CEST 2016 armv7l
BAD & BAD
ERRORS: (ath0 & ath1 broken) wireless devices cannot get IP address.
........wired devices are ok
----
DD-WRT v3.0-r30534 std (09/01/16)
Linux 3.18.40 #102 SMP PREEMPT Fri Aug 26 01:37:47 CEST 2016 armv7l
is working ok
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Sat Sep 10, 2016 4:28 Post subject:
mrjcd wrote:
Linksys EA8500
DD-WRT v3.0-r30605 std (09/09/16)
Linux 3.18.41 #104 SMP PREEMPT Wed Sep 7 13:12:34 CEST 2016 armv7l
BAD & BAD
ERRORS: (ath0 & ath1 broken) wireless devices cannot get IP address.
........wired devices are ok
----
DD-WRT v3.0-r30534 std (09/01/16)
Linux 3.18.40 #102 SMP PREEMPT Fri Aug 26 01:37:47 CEST 2016 armv7l
is working ok
works if u disable wifi encryption, which is basically a no. its been like this for over 20 commits, kong fixed it already in his latest build. affects qca99xx only so far _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Linksys EA8500
DD-WRT v3.0-r30605 std (09/09/16)
Linux 3.18.41 #104 SMP PREEMPT Wed Sep 7 13:12:34 CEST 2016 armv7l
BAD & BAD
ERRORS: (ath0 & ath1 broken) wireless devices cannot get IP address.
........wired devices are ok
----
DD-WRT v3.0-r30534 std (09/01/16)
Linux 3.18.40 #102 SMP PREEMPT Fri Aug 26 01:37:47 CEST 2016 armv7l
is working ok
works if u disable wifi encryption, which is basically a no. its been like this for over 20 commits, kong fixed it already in his latest build. affects qca99xx only so far
Yea 30590M kongat (09/08/16) works good but don't have unbound.
I'll just let it run on 30534 for a while see if it holds up.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Sat Sep 10, 2016 7:57 Post subject:
Router Model TPLINK WR1043ND V2
Firmware Version DD-WRT v3.0-r30605 std (09/09/16)
Kernel Version Linux 3.18.41 #570 Fri Sep 9 04:34:42 CEST 2016 mips
reset: yes x2
status: ok
errors: GUI is not accessible until pass+details + refresh (f5), so far its running ok !!
Apply settings over WAN breaks local DNS....
wrong wi-fi speed in status page
http://svn.dd-wrt.com/ticket/5544 _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Sun Sep 11, 2016 5:55; edited 2 times in total
Router: TPLINK WR1043ND V3
Firmware: DD-WRT v3.0-r30605 std (09/09/16)
Kernel: Linux 3.18.41 #570 Fri Sep 9 04:34:42 CEST 2016 mips
Status: OK
Reset: NO
Errors: NO
Still have spikes on upload (1 Mbps) ..it is a little better from r30356 but it has work to do,to solve this.
Many users are gamers and these lag spikes ruins their game.
DD-WRT is a very good firmware why devs doesnt listen us???
I see that users again..and again..and again are telling about this lag spikes in upload...especially in slow connection below 1 Mbps.
Please solve this issue. _________________ Tp-Link WR-1043ND v3
Firmware:DD-WRT v3.0-r47040 (07/12/21)
Router Model TP-Link TL-WR841ND v9
Firmware Version DD-WRT v3.0-r30605 std (09/09/16)
Kernel Version Linux 3.18.41 #564 Fri Sep 9 04:28:31 CEST 2016 mips
Status: OK
Reset: No
Errors: None so far.
Posted: Sat Sep 10, 2016 11:45 Post subject: Re: Buffalo WBMR-HP-G300H
AES256 wrote:
Router: Buffalo WBMR-HP-G300H
Old firmware: 29519 (04/25/16)
Reset: no
Status: BAD
Hi there!
This firmware release doesn't work for me. After the router reboots, there is no wireless tab in the control panel, and the wifi is turned off.
So I tried to flash 30534, but no wireless tab again
Now I'm back to what I was using before (29519)
Is it a known bug?
I'm using Buffalo WBMR-HP-G300H and have the same problem since r30356. That mean the problem still remain for this build. I've better skipped.
My last working build is r29739. _________________ Buffalo WBMR-HP-G300H
DD-WRT v3.0-r29739 std (05/19/16)
