[qed]

Hi,

I have a very strange problem with Fonera and v24 rc6.2 firmware.
The situation is:
Pc1 is has a wired connection, ssh client.
Pc2 is connected by wifi, ssh server.

Pc1 <=> Hub <=> Fonera <(wifi)> Pc2

The IP of both pc are static. When i try to connect (ping or wathever) from Pc1 to Pc2 i cant reach him until Pc2 has ping'ed Pc1 first. Pc2 is always able to navigate.

If i ping Pc1 from Pc2 also Pc1 will be able to ping Pc2 for few seconds. As i stop generating traffic Pc1 will not be able to reach Pc2 easily.

For example to open an ssh session i have to:
1) Ping from Pc2 to Pc1
2) Start ssh clinet from Pc1 to Pc2
3) Stop ping at point 1)
4) Keep traffic on ssh (or keep the ping at point 1))

If i don't do that my ssh ends for timeout or i will see the echo of the command sent after 10 seconds! If i keep typing the delay is like 2 ms. As i stop for 1 min... back to the 10 seconds delay or timeout.


This situation was working with cable.
The wireless connection is always up, or atleast wpa_supplicant and madwifi drivers are not showing any disconnection. PSM is disabled on the wireless card.


Any suggestion?

Thanks.