Nighthawk X10 (R9000)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3 ... 8, 9, 10 ... 20, 21, 22  Next
Author Message
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6474
Location: Dresden, Germany

PostPosted: Mon Feb 20, 2017 22:40    Post subject: Reply with quote
there is no tap driver. tap works without driver. only windows needs something like that
_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.9.13 #17 SMP PREEMPT Wed Mar 8 00:16:54 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear Nighthawk X10
Sponsor
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 5173
Location: MB, Canada

PostPosted: Tue Feb 21, 2017 12:34    Post subject: Reply with quote
give them another latest build bs. only latest build has correct 2.4ghz vht beacon info for qam256:)
_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings || Qualcomm Atheros Repeating

[QUALCOMM] R7800 ---------------> DD-WRT v3.0-r31883 std (private test)
[QUALCOMM] DIR-862L A1 --------> DD-WRT v3.0-r31883 std (private test)
[QUALCOMM] DIR-862L A1 --------> DD-WRT v3.0-r31883 std (private test)
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 ------> DD-WRT v3.0-r31825 std
[BROADCOM] DIR-860L A1 --------> DD-WRT v3.0-r31825 std

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers


Love you AM never forget 10/26/2013..

RIP dad 1945 ~ 2017..
labo
DD-WRT User


Joined: 30 Jan 2015
Posts: 227
Location: Texas, USA

PostPosted: Tue Feb 21, 2017 16:35    Post subject: Wireless repeater bridge check Reply with quote
@Magnetron,
Since you have the second R9000, could you please help with this request of checking the wireless repeater bridge functionality if this is working well?
Planning to invest on second R9000 if this indeed works.
Thanks
labo
DD-WRT User


Joined: 30 Jan 2015
Posts: 227
Location: Texas, USA

PostPosted: Tue Feb 21, 2017 20:37    Post subject: Reply with quote
Updated to Firmware: DD-WRT v3.0-r31481 std (02/20/17)
NVRAM still shows as 64K.
Enabled TurboQAM (QAM256) support, but the max I see is only 540Mb/s instead of 800Mb/s.

Another issue is that when any wireless setup is updated/saved, the wireless packet info resets to zero (transmitted and received).
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 5173
Location: MB, Canada

PostPosted: Tue Feb 21, 2017 23:52    Post subject: Reply with quote
labo wrote:
Updated to Firmware: DD-WRT v3.0-r31481 std (02/20/17)
NVRAM still shows as 64K.
Enabled TurboQAM (QAM256) support, but the max I see is only 540Mb/s instead of 800Mb/s.

Another issue is that when any wireless setup is updated/saved, the wireless packet info resets to zero (transmitted and received).


repeater methods (client+vap, client bridge+vap, wds ap <-> wds station both 5ghz & 2.4ghz) works again in latest build, qca9984 had some issues earlier & this router also has 2 qca9984 in it, the rates are also fixed. wifi packet info is reset cause the radios have to go down then up again to apply the changes, just the way they work. the packet counts the radios tell ddwrt are erased.

_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings || Qualcomm Atheros Repeating

[QUALCOMM] R7800 ---------------> DD-WRT v3.0-r31883 std (private test)
[QUALCOMM] DIR-862L A1 --------> DD-WRT v3.0-r31883 std (private test)
[QUALCOMM] DIR-862L A1 --------> DD-WRT v3.0-r31883 std (private test)
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 ------> DD-WRT v3.0-r31825 std
[BROADCOM] DIR-860L A1 --------> DD-WRT v3.0-r31825 std

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers


Love you AM never forget 10/26/2013..

RIP dad 1945 ~ 2017..
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6474
Location: Dresden, Germany

PostPosted: Wed Feb 22, 2017 9:31    Post subject: Reply with quote
fixed rate info. nvram size (gui fix only, rest worked already). turbo qam qam256 broadcom vendor ie
_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.9.13 #17 SMP PREEMPT Wed Mar 8 00:16:54 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear Nighthawk X10
buffalo0207
DD-WRT Novice


Joined: 30 Apr 2014
Posts: 26
Location: UK

PostPosted: Wed Feb 22, 2017 12:03    Post subject: Reply with quote
Build 31495 - nvram states 128kbs and TurboQam256 appears to be working correctly . In the previous build, I couldn't get my Amazon Echo & Dot to connect, but all appears to be working now...

Thanks BS.
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 5173
Location: MB, Canada

PostPosted: Wed Feb 22, 2017 12:05    Post subject: Reply with quote
buffalo0207 wrote:
Build 31495 - nvram states 128kbs and TurboQam256 appears to be working correctly . In the previous build, I couldn't get my Amazon Echo & Dot to connect, but all appears to be working now...


what 2.4ghz device are u using when turbo qam is on? as much detail as possible, like the wifi radio it has inside if u know.

_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings || Qualcomm Atheros Repeating

[QUALCOMM] R7800 ---------------> DD-WRT v3.0-r31883 std (private test)
[QUALCOMM] DIR-862L A1 --------> DD-WRT v3.0-r31883 std (private test)
[QUALCOMM] DIR-862L A1 --------> DD-WRT v3.0-r31883 std (private test)
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 ------> DD-WRT v3.0-r31825 std
[BROADCOM] DIR-860L A1 --------> DD-WRT v3.0-r31825 std

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers


Love you AM never forget 10/26/2013..

RIP dad 1945 ~ 2017..
softerist
DD-WRT Novice


Joined: 20 Apr 2016
Posts: 2

PostPosted: Wed Feb 22, 2017 13:06    Post subject: Available features Reply with quote
I'm a newbie on this forum. I've recently got one of R9000 and I'm interested if in the latest WRT version of this router is still available there the PLEX MEDIA SERVER somehow available with the NETGEAR DOWNLOADER.

Thanky You!
buffalo0207
DD-WRT Novice


Joined: 30 Apr 2014
Posts: 26
Location: UK

PostPosted: Wed Feb 22, 2017 13:35    Post subject: Reply with quote
@tatsuya46

The only 2.4ghz devices I use are 3 Squeezebox Controllers (by Logitech) and the Amazon ECHO and DOT.

Actually, all these devices work , except the Amazon DOT. However, the Amazon ECHO is working fine, so for now, I've disabled TurboQam256.

If you want to know the wifi radios for these devices, they are easily found on Google. I would look myself, but I'm not sure of the exact information you want.
Magnetron1.1
DD-WRT User


Joined: 21 Nov 2010
Posts: 268
Location: North America

PostPosted: Wed Feb 22, 2017 20:09    Post subject: Reply with quote
Sorry for the delay. Had to wait for BrainSlayers latest r31495 release which fixed several Wi-Fi problems.

Here are the IPERF3 results for 2 R9000 routers one of which (R900RT2) is connected as a Client Bridge to the first router (R9000RT1).

R9000RT1 is setup as follows:
ATH0 : AP, IP 192.168.18.1, Security AES/WPA2-Personal, Wireless : channel 64, AC-Only, VHT160, IPERF3 : Client

R9000RT2 is setup as follows:
ATH0 : Client Bridge, Static IP 192.168.18.2, Gateway and DNS 192.168.18.1, Wireless/Security: same as above, IPERF3 : Server
Server setup:
root@R9000RT2:~# iperf3 -s -D <== Don't need displayed output so "daemonize" it.


Since the routers are 2 feet (< 1 meter) apart, I adjusted the TX powers to 10 dBm to prevent possible receiver overload.

Run IPERF3 Client: (Results happen to be better than average.)

root@R9000RT1:~# iperf3 -c 192.168.18.2 -C westwood
Connecting to host 192.168.18.2, port 5201
[ 4] local 192.168.18.1 port 37034 connected to 192.168.18.2 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 79.9 MBytes 669 Mbits/sec 0 3.24 MBytes
[ 4] 1.00-2.00 sec 92.5 MBytes 776 Mbits/sec 0 3.24 MBytes
[ 4] 2.00-3.00 sec 84.6 MBytes 709 Mbits/sec 0 5.82 MBytes
[ 4] 3.00-4.00 sec 86.2 MBytes 724 Mbits/sec 0 5.82 MBytes
[ 4] 4.00-5.00 sec 87.5 MBytes 733 Mbits/sec 0 5.82 MBytes
[ 4] 5.00-6.00 sec 83.8 MBytes 702 Mbits/sec 0 5.82 MBytes
[ 4] 6.00-7.00 sec 87.7 MBytes 736 Mbits/sec 0 5.82 MBytes
[ 4] 7.00-8.00 sec 90.5 MBytes 759 Mbits/sec 0 5.82 MBytes
[ 4] 8.00-9.00 sec 85.4 MBytes 716 Mbits/sec 0 5.82 MBytes
[ 4] 9.00-10.00 sec 89.3 MBytes 749 Mbits/sec 0 5.82 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 867 MBytes 727 Mbits/sec 0 sender
[ 4] 0.00-10.00 sec 864 MBytes 724 Mbits/sec receiver

iperf Done.

Run 4 parallel streams:
root@R9000RT1:~# iperf3 -c 192.168.18.2 -C westwood -P4
Connecting to host 192.168.18.2, port 5201
[ 4] local 192.168.18.1 port 36980 connected to 192.168.18.2 port 5201
[ 6] local 192.168.18.1 port 36982 connected to 192.168.18.2 port 5201
[ 8] local 192.168.18.1 port 36984 connected to 192.168.18.2 port 5201
[ 10] local 192.168.18.1 port 36986 connected to 192.168.18.2 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 34.0 MBytes 283 Mbits/sec 0 3.12 MBytes
[ 6] 0.00-1.00 sec 32.5 MBytes 272 Mbits/sec 0 3.33 MBytes
[ 8] 0.00-1.00 sec 32.4 MBytes 270 Mbits/sec 0 2.90 MBytes
[ 10] 0.00-1.00 sec 33.2 MBytes 277 Mbits/sec 0 3.36 MBytes
[SUM] 0.00-1.00 sec 132 MBytes 1.10 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ 4] 1.00-2.01 sec 32.8 MBytes 275 Mbits/sec 0 3.91 MBytes
[ 6] 1.00-2.01 sec 32.9 MBytes 276 Mbits/sec 0 3.53 MBytes
[ 8] 1.00-2.01 sec 32.7 MBytes 274 Mbits/sec 0 4.34 MBytes
[ 10] 1.00-2.01 sec 33.4 MBytes 280 Mbits/sec 0 4.04 MBytes
[SUM] 1.00-2.01 sec 132 MBytes 1.10 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ 4] 2.01-3.00 sec 35.2 MBytes 296 Mbits/sec 0 3.91 MBytes
[ 6] 2.01-3.00 sec 34.4 MBytes 289 Mbits/sec 0 3.53 MBytes
[ 8] 2.01-3.00 sec 35.2 MBytes 296 Mbits/sec 0 4.34 MBytes
[ 10] 2.01-3.00 sec 35.7 MBytes 300 Mbits/sec 0 4.04 MBytes
[SUM] 2.01-3.00 sec 141 MBytes 1.18 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ 4] 3.00-4.01 sec 35.0 MBytes 293 Mbits/sec 0 3.91 MBytes
[ 6] 3.00-4.01 sec 34.4 MBytes 288 Mbits/sec 0 3.53 MBytes
[ 8] 3.00-4.01 sec 34.7 MBytes 291 Mbits/sec 0 4.34 MBytes
[ 10] 3.00-4.01 sec 34.6 MBytes 289 Mbits/sec 0 4.04 MBytes
[SUM] 3.00-4.01 sec 139 MBytes 1.16 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ 4] 4.01-5.01 sec 34.6 MBytes 290 Mbits/sec 0 3.91 MBytes
[ 6] 4.01-5.01 sec 33.7 MBytes 282 Mbits/sec 0 3.53 MBytes
[ 8] 4.01-5.01 sec 34.2 MBytes 287 Mbits/sec 0 4.34 MBytes
[ 10] 4.01-5.01 sec 33.7 MBytes 282 Mbits/sec 0 4.04 MBytes
[SUM] 4.01-5.01 sec 136 MBytes 1.14 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ 4] 5.01-6.00 sec 35.0 MBytes 294 Mbits/sec 0 3.91 MBytes
[ 6] 5.01-6.00 sec 35.2 MBytes 296 Mbits/sec 0 3.53 MBytes
[ 8] 5.01-6.00 sec 34.5 MBytes 290 Mbits/sec 0 4.34 MBytes
[ 10] 5.01-6.00 sec 34.9 MBytes 293 Mbits/sec 0 4.04 MBytes
[SUM] 5.01-6.00 sec 140 MBytes 1.17 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ 4] 6.00-7.01 sec 33.5 MBytes 279 Mbits/sec 0 4.10 MBytes
[ 6] 6.00-7.01 sec 33.4 MBytes 278 Mbits/sec 0 3.88 MBytes
[ 8] 6.00-7.01 sec 33.4 MBytes 279 Mbits/sec 0 4.34 MBytes
[ 10] 6.00-7.01 sec 33.3 MBytes 278 Mbits/sec 0 4.04 MBytes
[SUM] 6.00-7.01 sec 134 MBytes 1.11 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ 4] 7.01-8.00 sec 33.5 MBytes 283 Mbits/sec 0 4.10 MBytes
[ 6] 7.01-8.00 sec 33.5 MBytes 283 Mbits/sec 0 3.88 MBytes
[ 8] 7.01-8.00 sec 33.5 MBytes 283 Mbits/sec 0 4.34 MBytes
[ 10] 7.01-8.00 sec 33.5 MBytes 283 Mbits/sec 0 4.04 MBytes
[SUM] 7.01-8.00 sec 134 MBytes 1.13 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ 4] 8.00-9.01 sec 33.8 MBytes 282 Mbits/sec 0 4.10 MBytes
[ 6] 8.00-9.01 sec 33.3 MBytes 278 Mbits/sec 0 3.88 MBytes
[ 8] 8.00-9.01 sec 33.3 MBytes 278 Mbits/sec 0 4.34 MBytes
[ 10] 8.00-9.01 sec 33.4 MBytes 278 Mbits/sec 0 4.04 MBytes
[SUM] 8.00-9.01 sec 134 MBytes 1.12 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ 4] 9.01-10.00 sec 35.3 MBytes 297 Mbits/sec 0 4.10 MBytes
[ 6] 9.01-10.00 sec 34.7 MBytes 292 Mbits/sec 0 3.88 MBytes
[ 8] 9.01-10.00 sec 34.7 MBytes 292 Mbits/sec 0 4.34 MBytes
[ 10] 9.01-10.00 sec 34.4 MBytes 290 Mbits/sec 0 4.04 MBytes
[SUM] 9.01-10.00 sec 139 MBytes 1.17 Gbits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 343 MBytes 287 Mbits/sec 0 sender
[ 4] 0.00-10.00 sec 339 MBytes 284 Mbits/sec receiver
[ 6] 0.00-10.00 sec 338 MBytes 283 Mbits/sec 0 sender
[ 6] 0.00-10.00 sec 334 MBytes 280 Mbits/sec receiver
[ 8] 0.00-10.00 sec 339 MBytes 284 Mbits/sec 0 sender
[ 8] 0.00-10.00 sec 335 MBytes 281 Mbits/sec receiver
[ 10] 0.00-10.00 sec 340 MBytes 285 Mbits/sec 0 sender
[ 10] 0.00-10.00 sec 337 MBytes 282 Mbits/sec receiver
[SUM] 0.00-10.00 sec 1.33 GBytes 1.14 Gbits/sec 0 sender
[SUM] 0.00-10.00 sec 1.31 GBytes 1.13 Gbits/sec receiver

iperf Done.


Here's the CPU load from TOP while running IPERF3 with 4 parallel streams:

The highest TX/RX connection speeds between the 2 routers was 1733Mb/s:

- Magnetron1.1
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6474
Location: Dresden, Germany

PostPosted: Thu Feb 23, 2017 7:05    Post subject: Reply with quote
1.
use wds ap -> wds sta for benchmarks. client bridge remains shit. its a fake bridge and costs more cpu time
2. never run iperf3 on the r9000. run it on a device behind like a pc.
3.
compare it with vht80. vht160 is 2x2 only and vht80 is 4x4. so vht80 is likelly be the same as fast or even faster at indoor conditions

_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.9.13 #17 SMP PREEMPT Wed Mar 8 00:16:54 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear Nighthawk X10
softerist
DD-WRT Novice


Joined: 20 Apr 2016
Posts: 2

PostPosted: Thu Feb 23, 2017 9:29    Post subject: Re: Available features Reply with quote
softerist wrote:
I'm a newbie on this forum. I've recently got one of R9000 and I'm interested if in the latest WRT version of this router is still available there the PLEX MEDIA SERVER somehow available with the NETGEAR DOWNLOADER.

Thanky You!


can someone answer please?
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 5173
Location: MB, Canada

PostPosted: Thu Feb 23, 2017 9:45    Post subject: Reply with quote
buffalo0207 wrote:
@tatsuya46

The only 2.4ghz devices I use are 3 Squeezebox Controllers (by Logitech) and the Amazon ECHO and DOT.

Actually, all these devices work , except the Amazon DOT. However, the Amazon ECHO is working fine, so for now, I've disabled TurboQam256.

If you want to know the wifi radios for these devices, they are easily found on Google. I would look myself, but I'm not sure of the exact information you want.


and u have qam256 ENABLED, and they connect?

also. anyone else that has 2 r9000. could u do wds ap <-> wds station between them using 802.11ad & provide iperf benchmarks.?

_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings || Qualcomm Atheros Repeating

[QUALCOMM] R7800 ---------------> DD-WRT v3.0-r31883 std (private test)
[QUALCOMM] DIR-862L A1 --------> DD-WRT v3.0-r31883 std (private test)
[QUALCOMM] DIR-862L A1 --------> DD-WRT v3.0-r31883 std (private test)
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 ------> DD-WRT v3.0-r31825 std
[BROADCOM] DIR-860L A1 --------> DD-WRT v3.0-r31825 std

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers


Love you AM never forget 10/26/2013..

RIP dad 1945 ~ 2017..
Magnetron1.1
DD-WRT User


Joined: 21 Nov 2010
Posts: 268
Location: North America

PostPosted: Thu Feb 23, 2017 14:14    Post subject: Reply with quote
If I turn on TurboQAM nothing will connect using BS 31495 f/w.


- Magnetron1.1
Goto page Previous  1, 2, 3 ... 8, 9, 10 ... 20, 21, 22  Next Display posts from previous:    Page 9 of 22
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum