Nighthawk X10 (R9000)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3 ... 25, 26, 27, 28, 29, 30  Next
Author Message
zavr
DD-WRT Novice


Joined: 30 May 2017
Posts: 6
Location: Moscow, RU

PostPosted: Sun Jun 04, 2017 14:50    Post subject: Reply with quote
Is it possible to flash Kong's build over the regular DD-WRT build?
_________________
Best regards,
Ruslan
Sponsor
tmo1138
DD-WRT User


Joined: 24 Mar 2015
Posts: 163
Location: Tacoma, Wa

PostPosted: Sun Jun 04, 2017 20:54    Post subject: Re: new Kong build for R9000 Reply with quote
DeXB wrote:
labo wrote:
New build from Kong is available:

Firmware Version DD-WRT v3.0-r32170M kongal (06/02/17)
Kernel VersionLinux 4.9.30 #11 SMP PREEMPT Fri Jun 2 23:17:23 CEST 2017 armv7l

http://desipro.de/ddwrt/K4-AC-ALPINE/

Updated, no obvious issues so far.


Is there any changelog?


http://svn.dd-wrt.com/

Follow back from revision 32170 and that's what's in this build.

I think this is getting to where I can pull my R9000 out of rotation.. run the house on the R8000 and try out these builds on a regular basis.

_________________
Routers:
Netgear R7000 - DD-WRT v3.0-r31780M kongac (03/26/17)
Netgear R8000 - DD-WRT v3.0-r30880 std (11/14/16)
Netgear R9000 - Stock for the moment

Useful links:

Kong's Builds:
http://www.desipro.de/ddwrt/

BrainSlayer Builds:
ftp://ftp.dd-wrt.com/betas/2017/

CloneVince keeps an unofficial repository:
http://ddwrt-kong.clonevince.fr/

dd-wrt supported devices:
http://www.dd-wrt.com/wiki/index.php/Supported_Devices
DeXB
DD-WRT Novice


Joined: 22 May 2017
Posts: 25

PostPosted: Sun Jun 04, 2017 21:01    Post subject: Re: new Kong build for R9000 Reply with quote
tmo1138 wrote:

http://svn.dd-wrt.com/

Follow back from revision 32170 and that's what's in this build.

I think this is getting to where I can pull my R9000 out of rotation.. run the house on the R8000 and try out these builds on a regular basis.


What's wrong with this builds that you cannot use R9000 as a main one?
tmo1138
DD-WRT User


Joined: 24 Mar 2015
Posts: 163
Location: Tacoma, Wa

PostPosted: Sun Jun 04, 2017 22:28    Post subject: Re: new Kong build for R9000 Reply with quote
DeXB wrote:
tmo1138 wrote:

http://svn.dd-wrt.com/

Follow back from revision 32170 and that's what's in this build.

I think this is getting to where I can pull my R9000 out of rotation.. run the house on the R8000 and try out these builds on a regular basis.


What's wrong with this builds that you cannot use R9000 as a main one?


Speaking from experience I don't typically use the first rollouts of dd-wrt on a router that I need as my 'daily use' router. I fought with the R8000 builds for a long time before I found one that really worked and stayed solid. That version is the one I mention in my sig (R30880). I've tried moving to newer versions but I can't configure the virtual interfaces and VPN policies with the newer ones like I can with that version so I stay there.

_________________
Routers:
Netgear R7000 - DD-WRT v3.0-r31780M kongac (03/26/17)
Netgear R8000 - DD-WRT v3.0-r30880 std (11/14/16)
Netgear R9000 - Stock for the moment

Useful links:

Kong's Builds:
http://www.desipro.de/ddwrt/

BrainSlayer Builds:
ftp://ftp.dd-wrt.com/betas/2017/

CloneVince keeps an unofficial repository:
http://ddwrt-kong.clonevince.fr/

dd-wrt supported devices:
http://www.dd-wrt.com/wiki/index.php/Supported_Devices
Johnnyde94
DD-WRT User


Joined: 20 Mar 2012
Posts: 52

PostPosted: Mon Jun 05, 2017 3:16    Post subject: OC Reply with quote
Would anyone happen to know how to overclock this beast i'm curious to how far it could be pushed. Would overclocking do anything for vpn speeds or wifi? What would be the benefits if any to overclocking this beast?
DeXB
DD-WRT Novice


Joined: 22 May 2017
Posts: 25

PostPosted: Mon Jun 05, 2017 5:23    Post subject: Re: OC Reply with quote
Johnnyde94 wrote:
Would anyone happen to know how to overclock this beast i'm curious to how far it could be pushed. Would overclocking do anything for vpn speeds or wifi? What would be the benefits if any to overclocking this beast?


Which VPN speeds are you hoping to achieve?

I am maxing out my 100/20 Mbps connection on R9000 with 150ms latency to VPN server. In comparison my RT-AC68U with 800Mhz CPU can only do 45Mbps with the same latency. However with latency of 5ms I am pushing RT-AC68U for 111/45 Mbps on a different internet internconnection (200/45), which I am unable to test R9000 right now.

So it all depends on two factors in my experience: latency & CPU clock.
DeXB
DD-WRT Novice


Joined: 22 May 2017
Posts: 25

PostPosted: Fri Jun 09, 2017 9:58    Post subject: Reply with quote
I am considering buying 10gbe NAS, has anyone tried 10gbe port under Kong's FW? Any issues?
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6682
Location: Dresden, Germany

PostPosted: Fri Jun 09, 2017 10:05    Post subject: Reply with quote
pre release for testing. i changed alot within the embedded webserver. i hope there are no crashbugs within it. but overall it should be faster than ever before
_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.9.13 #17 SMP PREEMPT Wed Mar 8 00:16:54 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear Nighthawk X10
Johnnyde94
DD-WRT User


Joined: 20 Mar 2012
Posts: 52

PostPosted: Fri Jun 09, 2017 16:05    Post subject: Reply with quote
BrainSlayer wrote:
pre release for testing. i changed alot within the embedded webserver. i hope there are no crashbugs within it. but overall it should be faster than ever before


Cool thanks? You wouldn't be able to add overlooking or a way to increase tx power above 30? Do you know ssh commands to do ether?
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6682
Location: Dresden, Germany

PostPosted: Fri Jun 09, 2017 19:28    Post subject: Reply with quote
i dont want to play with overclocking on a 1.8 ghz quad core cpu. i dont know the real limits yet. and for the qca chipset, its hard to run it with over limits without destroying it. it gets already hot from the default settings. so yes its possible, but not with ssh, you have to modify the calibration data
_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.9.13 #17 SMP PREEMPT Wed Mar 8 00:16:54 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear Nighthawk X10
Johnnyde94
DD-WRT User


Joined: 20 Mar 2012
Posts: 52

PostPosted: Fri Jun 09, 2017 21:26    Post subject: Reply with quote
BrainSlayer wrote:
i dont want to play with overclocking on a 1.8 ghz quad core cpu. i dont know the real limits yet. and for the qca chipset, its hard to run it with over limits without destroying it. it gets already hot from the default settings. so yes its possible, but not with ssh, you have to modify the calibration data


Would there be any advantages gained by doing this? I have a large fan and a protection plan. Would there at least be away to get above 30tx power? Im not near a big city to I don't think running that high would cause any reparations.

How would one modify said calibration data? Im thinking at starting at 1.9mhz and a increase to ram and bus speeds once I find out what that is.

Any way to make a build for GT-AC 5300 because the default firmware is shit but the hardware has potential. Thankks master slayer Very Happy
Johnnyde94
DD-WRT User


Joined: 20 Mar 2012
Posts: 52

PostPosted: Fri Jun 09, 2017 21:28    Post subject: Reply with quote
BrainSlayer wrote:
pre release for testing. i changed alot within the embedded webserver. i hope there are no crashbugs within it. but overall it should be faster than ever before


Just tried the firmware will test out vpn speeds now. Any vpn server you like?
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 5353
Location: WPG, Canada

PostPosted: Fri Jun 09, 2017 22:00    Post subject: Reply with quote
BrainSlayer wrote:
i dont want to play with overclocking on a 1.8 ghz quad core cpu. i dont know the real limits yet. and for the qca chipset, its hard to run it with over limits without destroying it. it gets already hot from the default settings. so yes its possible, but not with ssh, you have to modify the calibration data


how about the ipq806x overclocking? or any qca overclocking really (i know ar93xx, qca955x can be oc'd). would they be easier cause of less cores?

and what do u mean the chipset runs hot? the 9984 in my r7800 only gets to around 50c under load (866/866mbps ac)

_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings Guide || Qualcomm Atheros Repeating

[QUALCOMM] R7800 ---------------> DD-WRT v3.0-r32753 std
[QUALCOMM] DIR-862L ------------> DD-WRT v3.0-r32753 std
[BROADCOM] DIR-860L A1 --------> DD-WRT v3.0-r32753 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 ------> DD-WRT v3.0-r32597 std

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers


Love you AM never forget 10/26/2013..

RIP dad 1945 ~ 2017..
Johnnyde94
DD-WRT User


Joined: 20 Mar 2012
Posts: 52

PostPosted: Sat Jun 10, 2017 0:57    Post subject: Reply with quote
BrainSlayer wrote:
i dont want to play with overclocking on a 1.8 ghz quad core cpu. i dont know the real limits yet. and for the qca chipset, its hard to run it with over limits without destroying it. it gets already hot from the default settings. so yes its possible, but not with ssh, you have to modify the calibration data


Right now my router is running at 30c so overheating is not a issue when overclocking.
Johnnyde94
DD-WRT User


Joined: 20 Mar 2012
Posts: 52

PostPosted: Sat Jun 10, 2017 1:53    Post subject: Reply with quote
BrainSlayer wrote:
pre release for testing. i changed alot within the embedded webserver. i hope there are no crashbugs within it. but overall it should be faster than ever before


I tried 3 VPN services and none seem to work with this build:(
Goto page Previous  1, 2, 3 ... 25, 26, 27, 28, 29, 30  Next Display posts from previous:    Page 26 of 30
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum