Posted: Fri Oct 21, 2016 11:39 Post subject: TP-Link TL-MR3020 Repeater Bridge (English)
Good day to all! Please help.
What I try to realize:
need to TL-MR3020 (SoC: Atheros AR9330 rev 1) hosted by WI-FI internet from the first router which is configured DHCP and distributing it, and on the LAN, and WI-FI, and that all this stuff was in one sub-mesh ( You do not need the separation of networks and all guest WI-FI).
Did everything according to instructions from here, turned half.
The first router:
IP: 172.16.30.1
DHCP on it, he's GATEWAY and DNS.
The second router (TL-MR3020):
statics
IP: 172.16.30.2
MASK: 255.255.255.0
GATEWAY: 172.16.30.1
DNS: 172.16.30.1
When you connect to it over the LAN to the Internet is and static IP configuration client, and automatic (obtained from the DHCP server of the first router).
Problems with clients connect by WI-FI (virtual access point), they are connected but the settings to automatically obtain an IP they get it from the range 169.x.x.x and neither the GATEWAY, DNS or they will not be issued if the same set up 172.16.30.h on their static and the GATEWAY, and DNS first router respectively, the Internet they still do not have and the network is pinged (the impression that this interface does not pass nothing at all).
Tell me there are some nuances (may need to configure the firewall rules or routing), but lack the knowledge they need tweaking? And yes, I tried a bunch of firmware versions all the same.
Posted: Fri Oct 21, 2016 14:00 Post subject: Re: TP-Link TL-MR3020 Repeater Bridge (English)
hmbe wrote:
Good day to all! Please help.
What I try to realize:
need to TL-MR3020 (SoC: Atheros AR9330 rev 1) hosted by WI-FI internet from the first router which is configured DHCP and distributing it, and on the LAN, and WI-FI, and that all this stuff was in one sub-mesh ( You do not need the separation of networks and all guest WI-FI).
Did everything according to instructions from here, turned half.
The first router:
IP: 172.16.30.1
DHCP on it, he's GATEWAY and DNS.
The second router (TL-MR3020):
statics
IP: 172.16.30.2
MASK: 255.255.255.0
GATEWAY: 172.16.30.1
DNS: 172.16.30.1
When you connect to it over the LAN to the Internet is and static IP configuration client, and automatic (obtained from the DHCP server of the first router).
Problems with clients connect by WI-FI (virtual access point), they are connected but the settings to automatically obtain an IP they get it from the range 169.x.x.x and neither the GATEWAY, DNS or they will not be issued if the same set up 172.16.30.h on their static and the GATEWAY, and DNS first router respectively, the Internet they still do not have and the network is pinged (the impression that this interface does not pass nothing at all).
Tell me there are some nuances (may need to configure the firewall rules or routing), but lack the knowledge they need tweaking? And yes, I tried a bunch of firmware versions all the same.
Everything suddenly worked according to instructions from the manual once chosen security mode WPA2-AES (the first router and the second router in repeater configuration and virtual access point). With WEP does not work for unknown reasons. The same feature or router or firmware DD-WRT router but loves to REBOOT, to accurately apply the changes. And do not forget to do once more restarts during setup.
