ship2
DD-WRT Novice
Joined: 02 Nov 2016
Posts: 1
|
 Posted: Wed Nov 02, 2016 14:19 Post subject: recommended build for WRT54G V3.0 (2016) |
 |
Hi, I know there are several threads of this same question but all of the relevant ones I found are years old.
I have the linksys model noted in the subject, CPU: Broadcom BCM4712 with 4MB flash.
I was wondering if anyone could recommend a good build. The one recommended in the database is 6 years old (14896 from 2010) which is fine if that's the best. Just wanted to check the forums first.
I just have a standard uplink to a cable modem pulling a public address then I'll have to hand out private addresses on the ports and WLAN to mask and route out.
Thank you |
|
jwh7
DD-WRT Guru
Joined: 25 Oct 2013
Posts: 2670
Location: Indy
|
| Posted: Wed Nov 02, 2016 19:45 Post subject: Re: recommended build for WRT54G V3.0 (2016) |
|
| ship2 wrote: | | I was wondering if anyone could recommend a good build. The one recommended in the database is 6 years old (14896 from 2010) which is fine if that's the best. |
That is not a recommended build: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=1002806#1002806
Use 14929 or 27858; or if you're interested, some have used recent builds with success (search the "New Build" threads), and I would have tried them but both my WRT's are in use at the in-laws, still on 27858.
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4 |
|
