|
Author |
Message |
frodrick DD-WRT Novice
Joined: 08 Feb 2017 Posts: 18
|
Posted: Wed Feb 08, 2017 22:17 Post subject: |
|
I got exactly this problem.
Any news about this?
I have the same model, 868l B1 upgraded from stock to r31221, amazed to get all to work right away.
what i did from base settings.
All i did was
Activated VPN server pptp
Activated USB and made a NAS share
Added a DYNDNS updater to afraid.org
that pretty much what i did.
as in thread i read something about SSH and telnet, i saw that telnet is active from start so i didnt activate it, SSH im not sure what it is.
we had some issues with bandwidth due to a excevator digging and stretching telecable, i lost like 50%.
but i dont care cause there digging in fibre
back to what happend, i thought it might be the router so after 24h uptime i did a reboot from admin tools and it booted up into recoverymode.
just keeps looping, uploading a FW, SUCSESS, back to recovery.
and my fault exact same as yours.
Tried same things you did, gonna order a USB TTL cable so i can try that.
Might this be avoided by inactivating Telnet in router? |
|
Back to top |
|
|
Sponsor
|
|
|
frodrick DD-WRT Novice
Joined: 08 Feb 2017 Posts: 18
|
Posted: Tue Feb 14, 2017 18:39 Post subject: |
|
used a vable, the flash -noheader didnt work, but using the nvram erase and reboot worked, it just worked, no flashing required. |
|
Back to top |
|
|
pitinga DD-WRT Novice
Joined: 26 May 2017 Posts: 11
|
Posted: Fri May 26, 2017 21:15 Post subject: |
|
frodrick wrote: | used a vable, the flash -noheader didnt work, but using the nvram erase and reboot worked, it just worked, no flashing required. |
How did you make the "nvram erase"?
I'm stuck in the same problem. Always in recovery page. Flash firmware seems to work, but no.... |
|
Back to top |
|
|
|