[d4rk_m4n]

Hi guys,

MODEL - TPLINK TD-8961N V3
FCC-ID - TE7TDW8961NDV3

I will add the internal pictures later.

Chipset: Ralink
Flash Chip: ESMT M12L64164A (1M x 16 Bit x 4 Banks)
(www.esmt.com.tw/DB/manager/upload/M12L64164A.pdf)

The internal picture from the FCC for the flash chip is not correct, as mine was ESMT but in the FCC it was EtronTech. (I disassemble mine to look inside)

Looking forward for your input.

Thanks!

[js1662]

No chance of getting dd-wrt support because it has an integrated modem and only 2MB of flash. See the following:

https://wikidevi.com/wiki/TP-LINK_TD-W8961ND_v3.x

http://www.dd-wrt.com/wiki/index.php/Known_incompatible_devices

[d4rk_m4n]

[js1662]

I suppose you know by now that modem router (a combo device with build in modem) is not supported by dd-wrt so I believe you want to know if there is any modem router that has bandwidth management function with stock firmware. BTW, what kind of bandwidth management you are looking for? Is it bandwidth/traffic monitoring or QoS? Anyway, some high end modem router such as DSL-AC68U from Asus has such functions. You can go to Asus web site and download the user manual and see if it is what you want.

On the other hand, if you want a less expensive approach, I would suggest you go for separate devices instead of combo device. I.e. use your existing TP-link modem router (in stock firmware) as modem and add another router (dd-wrt supported one, check this wiki for Supported Devices: http://dd-wrt.com/wiki/index.php/Supported_Devices ). In case you need traffic monitoring, you need a router with USB port and you can install YAMon (check this thread: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=289324 )