Posted: Sun Mar 26, 2017 19:55 Post subject: New Kong's build: DD-WRT v3.0-r31780M kongac (03/26/17)
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r31780M kongac (03/26/17)
Kernel Version: Linux 4.4.56 #286 SMP Sun Mar 26 12:47:05 CEST 2017 armv7l
reset:no
status:operational
errors: none so far
ddup latest
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.[
Your reports for Broadcom units are highly appreciated !
Router:
Firmware:
Kernel:
Previous:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29621_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31780M kongac (03/26/17)
Kernel: Linux 4.4.56 #286 SMP Sun Mar 26 12:47:05 CEST 2017 armv7l
Upgraded: from 31575M via ddup --flash-latest
Reset: No
Status: Working
Errors: None
PPPoE, LAN DHCP with static leases, DNSMASQ with DNSSEC, Qos (HTB, FQ_CODEL), AP mode 2.4GHz and 5GHz, USB storage.
Joined: 24 Mar 2015 Posts: 175 Location: Tacoma, Wa
Posted: Mon Mar 27, 2017 0:39 Post subject:
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31780M kongac (03/26/17)
Kernel: Linux 4.4.56 #286 SMP Sun Mar 26 12:47:05 CEST 2017 armv7l
Upgraded: from stock firmware
Reset: No
Status: Working
Errors: None
Install and update to latest was a snap. Router seems to be working great. Thanks for the hard work @Brainslayer and @<Kong> _________________ Routers:
Netgear R8000 - DD-WRT v3.0-r43420 std (06/15/20)
Netgear R9000 - DD-WRT v3.0-r43420 std (06/15/20)
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31780M kongac (03/26/17)
Kernel: Linux 4.4.56 #286 SMP Sun Mar 26 12:47:05 CEST 2017 armv7l
Upgraded: "ddup --flash-latest" via PuTTY, coming from r31575M
Reset: No
Status: Working well so far, possibly a wifi improvement
Errors: None observed yet
CPU Clock: 1200 MHz
Temp: CPU 60.2 °C / WL0 49.0 °C / WL1 50.7 °C
Active IP Connections: 1169
Wireless APs: 6 Physical/Virtual (3 in 2.4 GHz, 3 in 5 GHz)
Services: DHCP, DNSMasq, USB/JFFS2, SNMP, QoS, YAMon 3.2.5, SPI Firewall (until I figure out FWBuilder to external)
Supported Clients: 60+ (8 PCs, 4 tablets, 1 Buffalo NAS, 1 HP printer, 6 mobiles, 8 Samsung/DirecTV TVs/Genies, 16 Wansview/Linksys/Foscam webcams, 6 WeMo/AVI-ON utilities, 3 Honeywell thermostats)
General comments:
Uptime 60 minutes. So far, r31780M feels like a wifi improvement over the previous build I tried (upgraded to r31575M from r31571M and with a reset), where wifi signal felt degraded. Wifi connectivity feels noticeably more solid again (streaming) with r31780M - especially for the webcams, and mobile devices on the move. Thanks Kong, Brainslayer for continued hard work, and to the DDWRT community
Router: Asus RT-AC56U
Firmware: DD-WRT v3.0-r31780M kongac (03/26/17)
Kernel: Linux 4.4.56 #286 SMP Sun Mar 26 12:47:05 CEST 2017 armv7l
Previous: DD-WRT v3.0-r31575M kongac (03/21/17)
Status: OK
Reset: NO
Errors: NONE
Was worried about the build called "test" but it flashed okay I will update if any freezing thank you Kong and BrainSlayer.
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31780M kongac (03/26/17)
Kernel: Linux 4.4.56 #286 SMP Sun Mar 26 12:47:05 CEST 2017 armv7l
Status: Working
Reset: No
Previous: 31575
Errors: No
CPU Temperature : 49.7 °C / WL0 43.3 °C / WL1 47.5 °C
Uptime : 4 days, 2:26 without problem
Working very well :
Router mode : DHCP
DNSMasq
Encrypt DNS
SPI Firewall
Usb
Nas, Samba, JFFS2, miniDLNA,
wl0, wl1
Vpn
Kong and BS: Thanks for all your good work!
without VPN
with VPN
Last edited by Bernadoe on Fri Mar 31, 2017 17:51; edited 3 times in total
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31780M kongac (03/26/17)
Kernel: Linux 4.4.56 #286 SMP Sun Mar 26 12:47:05 CEST 2017 armv7l
Upgraded: from r31575M
Reset: No
Status: Working
Errors: None
i wasn't able to ddup from 31575 for some reason, couldn't resolve the desipro.de host. so manually upgraded from web admin.
no problems after that, ddup works from this build.
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31780M kongac (03/26/17)
Kernel: Linux 4.4.56 #286 SMP Sun Mar 26 12:47:05 CEST 2017 armv7l
Status: Working
Reset: No
Previous: 31575
Errors: No
CPU Temperature : 49.7 °C / WL0 43.3 °C / WL1 47.5 °C
Working very well :
Router mode : DHCP
DNSMasq
Encrypt DNS
SPI Firewall
Usb
Nas, Samba, JFFS2, miniDLNA,
wl0, wl1
Vpn
Kong and BS: Thanks for all your good work!
without VPN
with VPN
How are you getting gigabit speed on an R7000??? _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
