Author
Message
DPB DD-WRT Novice Joined: 27 Mar 2017 Posts: 2
Posted: Tue Mar 28, 2017 6:55 Post subject: Linksys E900 with 'big' firmware flash - no internet
I have just successfully flashed the 'big' dd-wrt onto my Linksys E900.
Having conected it to my broadband router the LinkSysE900 will not connect to the internet with the default firmware settings.
Auto Con is set to DHCP and security is disabled.
I'm not that tech savvy and do not know what to do next... any help appreciated.
Back to top
Sponsor
egc DD-WRT Guru Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Back to top
DPB DD-WRT Novice Joined: 27 Mar 2017 Posts: 2
Posted: Tue Mar 28, 2017 20:17 Post subject:
Install is dd-wrt.v24-21676_NEWD-2_K2.6_big-nv64k.big (I installed the mini version first using the guide you mention, but since I needed OPEN_VPN I then installed the 'big' version). Neither gave internet connectivity though.
Are you suggesting that 30880 build will solve my problem and does this contain OPEN_VPN.
Back to top
egc DD-WRT Guru Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Wed Mar 29, 2017 6:56 Post subject:
I have used 21676 on my WRT54GS and 320N and that was a solid build. Maybe the E900 is different but I doubt if a newer build will solve your problem, but you can always try. Start with the mini build and always 30/30/30 reset, follow the guide. _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top