Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ Unofficial Kong's release repository : http://ddwrt-kong.clonevince.fr/
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Status: Working
Reset: No, Automatic Update
Errors: No
Router: Netgear R8000
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Status: Working
Reset: No
Errors: As usual now, Core USB Support kills extender WiFi connection to the R8000 (same with a reset).
Last edited by limerick_fr on Mon May 15, 2017 3:15; edited 1 time in total
Router: Netgear R7000 #1
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Previous: DD-WRT v3.0-r31870M kongac (04/16/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Status: Working
Reset: No
Errors: No
Manual Update
CPU 62.5 °C / WL0 47.5 °C / WL1 49.0 °C
---------------------
Router: Netgear R7000 #2
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Previous: DD-WRT v3.0-r31870M kongac (04/16/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Status: Working
Reset: No
Errors: No
Manual Update
CPU 66.9 °C / WL0 51.5 °C / WL1 54.0 °C
-----------------
Thanks for update.
1 question :
Why there is never changelog ? _________________ Netgear R7000 :
#1 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP Off / IPv4 only / VAP Off & Wifi 2.4 / 5Ghz #2 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP On / IPv4 & IPv6 / VAP On & Wifi 2.4 / 5Ghz & Isolated Guest Network
Last edited by LiloBzH on Mon May 15, 2017 10:59; edited 1 time in total
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Previous: DD-WRT v3.0-r31870M kongac (04/16/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Status: Working
Reset: No
Errors: No
Manual Update
CPU 62.5 °C / WL0 47.5 °C / WL1 49.0 °C
Thanks for update.
1 question :
Why there is never changelog ?
Your going from build 31870 to 31980 there has been over 100 changes to the DDWRT code. My signature has a DDWRT 60-day Changelog Link, click it to read all the changes. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Router: Netgear R8500 MP2 version
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Status: Working
Reset: No
Errors: No
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Previous: DD-WRT v3.0-r31870M kongac (04/16/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Status: Working
Reset: No
Errors: No
Manual Update
CPU 62.5 °C / WL0 47.5 °C / WL1 49.0 °C
Thanks for update.
1 question :
Why there is never changelog ?
Because the person that was doing it hasn't got the time to do it properly and correctly anymore, since he's not getting paid for it and has a life/work besides ddwrt, and no one has volunteered and has the ability to do it. You have to check every commit change to translate it to human readable changes, some are easy some aren't. The link that mac913 gave you is less than halfway a changelog for humans. _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Previous: r31980M
Status: Functional - No DNS Leaks per http://dnsleak.com/ and https://ipleak.net/ Reset: No - ddup --flash-latest
Errors: None so far
Uptime: 3 days, 6:24
OpenVPN Client with PIA
USB Storage and Auto Mount Enabled
Samba Server Enabled
Thanks Kong _________________ Router: Netgear R7000
Firmware: v3.0-r44191 std (08/15/20)
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Previous: DD-WRT v3.0-r31870M kongac (04/16/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Status: Working
Reset: No
Errors: No
Manual Update
CPU 62.5 °C / WL0 47.5 °C / WL1 49.0 °C
Thanks for update.
1 question :
Why there is never changelog ?
Because the person that was doing it hasn't got the time to do it properly and correctly anymore, since he's not getting paid for it and has a life/work besides ddwrt, and no one has volunteered and has the ability to do it. You have to check every commit change to translate it to human readable changes, some are easy some aren't. The link that mac913 gave you is less than halfway a changelog for humans.
Be cool . it's just a question ^^
Thanks all for the answers _________________ Netgear R7000 :
#1 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP Off / IPv4 only / VAP Off & Wifi 2.4 / 5Ghz #2 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP On / IPv4 & IPv6 / VAP On & Wifi 2.4 / 5Ghz & Isolated Guest Network
My main router ASUS AC68U refuses client connection (at least for 5ghz channel) after 1 day or so. Flashed it back to 31920M which was stable previously.
Router: Netgear R7000
Firmware: DD-WRT v3.0-r31980M kongac (05/11/17)
Kernel: Linux 4.4.67 #317 SMP Thu May 11 12:58:51 CEST 2017 armv7l
Status: Working
Reset: Yes, every hour or so
Errors: No