This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 32170_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ [I prefer answere in whole sentence]
Linksys E2500
DD-WRT v3.0-r32170 mega (06/01/17)
Linux 3.10.105 #14708 Thu Jun 1 12:11:58 CEST 2017 mips
No Reset
QOS HFSC FQ_Codel on a 4/1 connection
DDNS DNS-O-Matic
SSH tun webif
openVPN server tun
br0 uses google DNS
restricted guest on wl0.1 w/Target DNS openDNS Family Shield
Radio Sched. on = 0500 - 1800 don't know that this still works but always did before
Seems all ok - openVPN server log on status tab still show nada.... Broadcom & Atheros QCA
:~# uptime
16:55:42 up 3:51, load average: 0.08, 0.10, 0.11
still wont install on rt-ac88u. I tried the web ui, telnet and firmware restoration tool. telnet reports that there is not enough space in the partition.
still wont install on rt-ac88u. I tried the web ui, telnet and firmware restoration tool. telnet reports that there is not enough space in the partition.
Same with my rt-ac3100. I opened a ticket a few weeks ago I think. _________________ I am far from a guru, I'm barely a novice.
You should fix your name resolution after you get it up. That's what's causing the bad address. _________________
Netgear R7800 kongpro 19.07 20190919 || Netgear R7000 36070M kongac (Client Bridge=5GHz, AP=2.4GHz with bridged VAP)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956
Last edited by Ah-Pin-Kor on Fri Jun 02, 2017 2:00; edited 1 time in total
And...
Netgear WNDR4000 Previous: DD-WRT v3.0-r31221 mega (02/01/17)
Linux 3.10.104 #13506 Wed Feb 1 10:24:09 CET 2017 mips
Flashed: DD-WRT v3.0-r32170 mega (06/01/17)
Linux 3.10.105 #14704 Thu Jun 1 12:09:39 CEST 2017 mips
No reset, setup as 2.4 GHz CB and 5 GHz AP, been using it for 50 min. Quick speed test showed 63.9
Mb/s down and 12.18 up. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Fri Jun 02, 2017 5:55 Post subject:
Router: Linksys E1200v2
Firmware: dd-wrt.v24-32170_NEWD-2_K3.x_mega-e1200v2.bin
Previous: dd-wrt.v24-31899_NEWD-2_K3.x_mega-e1200v2.bin
Kernel: Linux 3.10.105 #14704 Thu Jun 1 12:09:39 CEST 2017 mips
Status: Seems to be working great as a repeater, will report back if any issues arise.
Reset: Yes, you have to go from the mini build first, then the mega build. Reset going to mini.
Errors: None thus far
Router: 2x Linksys E3000
Firmware: dd-wrt.v24-32170_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-31924_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.105 #14704 Thu Jun 1 12:09:39 CEST 2017 mips
Status: Both working great as client bridges.
Reset: Nope
Errors: None that I've found so far...
Router: Trendnet TEW811DRU
Firmware: DD-WRT v3.0-r32170 mini (06/01/17)
Previous: DD-WRT v3.0-r31924 mini (05/02/17)
Kernel: Linux 4.4.70 #1488 Thu Jun 1 07:28:11 CEST 2017 armv7l
Status: Working great as a AC-only AP.
Reset: Nope
Errors: None thus far. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Last edited by SinCalChewy on Fri Jun 02, 2017 14:59; edited 1 time in total
Router: 2x Linksys E3000
Firmware: dd-wrt.v24-32170_NEWD-2_K3.x_mega-e1200v2.bin Previous: dd-wrt.v24-31924_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.105 #14704 Thu Jun 1 12:09:39 CEST 2017 mips
Status: Both working great as client bridges.
Reset: Nope
Errors: None that I've found so far...
I assume the highlighted 'e1200v2.bin' above is a copy/paste overtype oversight. You installed the latest mega-e3000.bin, right?
. _________________ WRT54GL v1.1 - dd-wrt V24 pre-sp2
E3000 - build 14929
Router: ASUS RT-AC87U ( Broadcom BCM4709 2cores @1GHz)
Firmware: DD-WRT v3.0-r32170 std (06/01/17)
Kernel: Linux 4.4.70 #1492 SMP Thu Jun 1 07:51:48 CEST 2017 armv7l
Status: working with no issues with 16 wifi clients
Reset: nvram erase && reboot before flash and reset to factory defaults in the WebGUI after flash
Errors: after 1 hours, I do see this in the syslog over and over again. I have no 192.168.1.x network, or 105 host
Jun 2 15:12:01 asus87u user.warn igmpproxy[1285]: No interfaces found for source 192.168.1.105
Observations: no tx/rx stats for wl1, also network mode doesn't seem to work.
Temperatures:
CPU 76.4 °C / WL0 48.7 °C / WL1 70.0 °C
Memory:
Total Available 97% 254600 kB / 262144 kB
Free 80% 202572 kB / 255328 kB