DD-WRT :: View topic - New build: DD-WRT v3.0 --- 32170 --- 2017/06/01

New build: DD-WRT v3.0 --- 32170 --- 2017/06/01

DD-WRT Forum Index -> Atheros WiSOC based Hardware

Goto page Previous 1, 2, 3, 4 Next

View previous topic :: View next topic

Author

Message

yodog
DD-WRT User

Joined: 04 Mar 2017
Posts: 89

Posted: Sat Jun 03, 2017 19:47 Post subject:
Don't got time to make a full spec post but it works great so far on my r9000 except VHT160 mode with everything auto will not work automatically, whereas kongs 5/16 build does. Setting it manually to the correct parameter for example ch 128 -14UU it works fine.

Sponsor

mkaand
DD-WRT User

Joined: 06 Jan 2008
Posts: 307
Location: Istanbul

Posted: Sun Jun 04, 2017 4:15 Post subject:

Router: WR1043ND v2.1
Firmware: 32170
Kernel: Linux 3.18.55 #4411 Thu Jun 1 04:01:54 CEST 2017 mips
Status: OK
Wireless Clinet Mode
OpenVPN Client
Reset: Yes
Errors:

Time Zone Settings wrong for GMT+3
I live in Istanbul. GMT+3 is my time zone but if I choose GMT-3 I see correct time. Someone should check all time zones. Anyway If I choose Europe/Istanbul time is OK.
_________________
Kaan's World | @mkaand | PLEX Archive | Trakt.tv

Mile-Lile
DD-WRT Guru

Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade

Posted: Sun Jun 04, 2017 4:46 Post subject:
Router Model GL.iNet-AR150 Firmware Version DD-WRT v3.0-r32170 std (06/01/17) Kernel VersionLinux 3.18.55 #4443 Thu Jun 1 04:56:08 CEST 2017 mips reset:no errors:no thx BS.

T-Fork
DD-WRT User

Joined: 06 Oct 2010
Posts: 53

Posted: Sun Jun 04, 2017 9:17 Post subject:

Router: Netgear WNDR3700 v1
Firmware: 32170
Kernel: Linux 3.10.102 #28775 Fri Aug 12 06:15:17 CEST 2016 mips
Status: Not working as client bridge
Reset: Yes
Errors:
Client bridge only briefly connects to AP, and that is in "legacy-mode". Soon there after it hands out IPs which causes me to be unable to connect to the router unless I set my computer to a static IP.
"Default GW mode" has been tried with AUTO and Manual with not luck.
Firmwares tried besides 32170, are 31571, 31899 and the now missing 31924. All which yeild the same result.

Reverted back to r30385, where client brigde works but with gimped upload speed.

Edit: found that r31544 works just fine and allows me to cap my 100/100 line compared to r30385 which only game me 45mbit out.

mm7
DD-WRT User

Joined: 22 Jun 2011
Posts: 57

Posted: Mon Jun 05, 2017 12:27 Post subject:
Router: TP-Link TL-WR1043ND v2 Status: Good Reset: Reset to defaults with flash procedure: erased NVRAM after flash Errors: Load is displaying 0 Load average is now always at 0 (screenshot). Last edited by mm7 on Fri Jun 09, 2017 17:25; edited 1 time in total

Alozaros
DD-WRT Guru

Joined: 16 Nov 2015
Posts: 6437
Location: UK, London, just across the river..

Posted: Mon Jun 05, 2017 20:43 Post subject:

Router Model-TPLINK WR1043ND V2
Firmware Version-DD-WRT v3.0-r32170 std (06/01/17)
Kernel Version-Linux 3.18.55 #4411 Thu Jun 1 04:01:54 CEST 2017 mips

reset: yes x2
status: ok... so far after 50 days on 31899 i decided to give it a go...
errors: none so far

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913

Last edited by Alozaros on Fri Jun 16, 2017 10:17; edited 1 time in total

milanmk
DD-WRT Novice

Joined: 18 Aug 2011
Posts: 25

Posted: Wed Jun 07, 2017 3:22 Post subject:
Router: TPLINK TL-WDR3600 Firmware: DD-WRT v3.0-r32170 std (06/01/17) Kernel: Linux 3.10.105 #32456 Thu Jun 1 03:06:02 CEST 2017 mips Status: Good Reset: Yes Errors: No

Drubus
DD-WRT Novice

Joined: 09 Jan 2012
Posts: 3

Posted: Wed Jun 07, 2017 21:04 Post subject:
Router Model: TP-Link TL-WR1043ND v1.8 Firmware Version: DD-WRT v3.0-r32170 (06/01/17) Kernel Version: Linux 3.10.105 #32484 Thu Jun 1 03:31:13 CEST 2017 mips Status: OK Reset: initial reset unsuccessful - reset button did not work despite being enabled in settings. I've used erase nvram and then proceeded with upgrade. Forgot to reset nvram after upgrade Errors: None so far

Deltabongo2
DD-WRT User

Joined: 11 Nov 2016
Posts: 51
Location: Canada

Posted: Thu Jun 08, 2017 23:32 Post subject:
Router: D-Link DIR-859 A3 Firmware DD-WRT v3.0-r32170 std (06/01/17) Kernel: Linux 3.18.55 #4417 Thu Jun 1 04:10:26 CEST 2017 mips Status: Good Reset: No Upgraded from 31899

nahnaush
DD-WRT Novice

Joined: 25 Oct 2016
Posts: 7

Posted: Sun Jun 11, 2017 1:51 Post subject: DD-WRT Build v3.0-r32170 std on TP-Link TL-WR842ND v1
Router: TP-Link TL-WR842ND v1 CPU Model: Atheros AR7241 ver 1 rev 1.1 (0x0101) Firmware: DD-WRT v3.0-r32170 std (06/01/17) Kernel: Linux 3.10.105 #32510 Thu Jun 1 03:51:16 CEST 2017 mips Status: Operational Reset: Yes Errors: None observed

h8red
DD-WRT Guru

Joined: 28 Jun 2011
Posts: 580
Location: Vilnius, Lithuania

Posted: Sun Jun 11, 2017 9:38 Post subject:
Router: TP-Link TL-WR842ND v2 Kernel: 3.10.105 #32512 Status: OK Reset: no Errors: no Web upgrade from r31924 _________________ [Ramips] Nexx WT3020F Openwrt @kernel #4.14.167 (OpenVPN server, Wireguard server, AD blocking, SQM QOS, USB)

1031982
DD-WRT User

Joined: 18 Apr 2008
Posts: 118

Posted: Wed Jun 14, 2017 19:14 Post subject:
Router : Netgear WNDR4300 Reset : yes Error : no Wi-Fi got very unstable. Some ethernet connections had issues as well. Reverting fixed all issues.

Xeon2k8
DD-WRT Guru

Joined: 11 Feb 2016
Posts: 1288

Posted: Wed Jun 14, 2017 19:35 Post subject:

1031982 wrote:

Router : Netgear WNDR4300
Reset : yes
Error : no

Wi-Fi got very unstable. Some ethernet connections had issues as well.
Reverting fixed all issues.

Reverting to what
_________________
R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS)
R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS)
R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS)
R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)

Inno_A_Santana
DD-WRT Novice

Joined: 05 Nov 2014
Posts: 9

Posted: Thu Jun 15, 2017 18:30 Post subject:

Router: TP-Link Archer C5 v1.2
Kernel: 3.18.55 #4413
Status: OK
Reset: no / web upgrade from r31825
Errors: no, but 5GHz wifi problems

misbehaviours:
- some clients don't connect to 5GHz when they where already connected to 2.4GHz and vice versa (like Intel wifi notebooks), broadcom wifi-chipset smartphones are fine
- dmesg log spam: "ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon"
This ticket had the same problem with the 5GHz ath10k driver: http://svn.dd-wrt.com/ticket/5407
- http://svn.dd-wrt.com/ticket/5600 'short preample' will not enable on 2.4 & 5GHz (Archer C5 has a QCA988x wifi chipset)
_________________
TP-Link WDR3600 v1.4 @ r29837 (06.06.2016)
TP-Link Archer C5 v1.2 @ r32170 (01.06.2017)
Netgear R7000 @ Kong build r32170M (11.06.2017)

Last edited by Inno_A_Santana on Sat Jun 17, 2017 2:46; edited 2 times in total

Lusitano
DD-WRT User

Joined: 25 Jun 2014
Posts: 142
Location: São Paulo - Brazil

Posted: Thu Jun 15, 2017 20:47 Post subject:

Router: TP-Link TL-WR841ND v8
Kernel: 3.18.55 #4401
Status: OK
Reset: No
Errors: Yes

My VPN PPTP it's not working anymore.
Windows 10 x64 >> DD-WRT

Syslog

Code:

Jun 15 20:28:53 dd-wrt daemon.info pptpd[4126]: CTRL: Client 191.*.*.* control connection started
Jun 15 20:28:54 dd-wrt daemon.info pptpd[4126]: CTRL: Starting call (launching pppd, opening GRE)
Jun 15 20:28:54 dd-wrt daemon.notice pppd[4127]: pppd 2.4.7 started by root, uid 0
Jun 15 20:29:24 dd-wrt daemon.info pppd[4127]: Exit.
Jun 15 20:29:24 dd-wrt daemon.err pptpd[4126]: GRE: read(fd=7,buffer=41f58c,len=8196) from PTY failed: status = -1 error = I/O error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Jun 15 20:29:24 dd-wrt daemon.err pptpd[4126]: CTRL: PTY read or GRE write failed (pty,gre)=(7,8)
Jun 15 20:29:24 dd-wrt daemon.debug pptpd[4126]: CTRL: Reaping child PPP[4127]
Jun 15 20:29:24 dd-wrt daemon.info pptpd[4126]: CTRL: Client 191.*.*.* control connection finished

Goto page Previous 1, 2, 3, 4 Next

Display posts from previous:

Page 2 of 4

DD-WRT Forum Index -> Atheros WiSOC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

New build: DD-WRT v3.0 --- 32170 --- 2017/06/01

Quick Links

Log in