root@WRT610N:~# cd /tmp
root@WRT610N:/tmp# wget ftp://ftp.dd-wrt.com/betas/2017/04-24-2017-r31899/broadc
om/dd-wrt.v24_mega_wrt610n.bin
Connecting to ftp.dd-wrt.com (185.84.6.100:21)
root@WRT610N:/tmp# write dd-wrt.v24_mega_wrt610n.bin linux
function stop_pppoeserver not found
function stop_freeradius not found
dd-wrt.v24_mega_wrt610n.bin: Bad trx header
root@WRT610N:/tmp#
Router: ausu-rt-ac87u
Firmware: 07-19-2017-r32753
Reset: Tried with and without
Errors: Device drops all connectivity randomly usually with only a couple of minutes of light use. Have to reboot the device manually to get connectivity back.
It was working with 07-08-2017 firmware before the update.
Can anyone confirm?
Can confirm random drops with rt-ac87u. _________________ Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Working
Reset: Yes via erase nvram
Errors: None so far
Previous: r32597
GUI is up and running as normal as far as i can tell. I will do the usual configurations and report back with any issues.
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Working
Reset: Yes via erase nvram
Errors: None so far
Previous: r32597
GUI is up and running as normal as far as i can tell. I will do the usual configurations and report back with any issues.
phew, I was waiting for someone with this router to try it out, I'll do the same, I'm on the build that got removed and 3 days of uptime I've had zero issues with the GUI so unlikely this build will have issues either.
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Working
Reset: Yes via erase nvram
Errors: None so far
Previous: r32597
GUI is up and running as normal as far as i can tell. I will do the usual configurations and report back with any issues.
phew, I was waiting for someone with this router to try it out, I'll do the same, I'm on the build that got removed and 3 days of uptime I've had zero issues with the GUI so unlikely this build will have issues either.
Man you are lame and no damn help to the rest of us... but yeah i was very apprehensive too but it is the least i can do to help because i can't make one of these firmware and stock firmware just makes me want to hurl the router at Buffalo and start cursing.
Thanks BS & Kong......those names sound like CSGO player names,
Router: 2* TP-Link Arcer C9 V1 + 1* V2
Firmware: r32753 (07/19/17)
Kernel: Linux 3.10.107 #15205 Wed Jul 19 08:52:37 CEST 2017 mips
Status: not working
Reset: no
Errors: reboot every few minutes
All Routers rebootet every few minutes, went back to 32170
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Working
Reset: Yes via erase nvram
Errors: None so far
Previous: r32597
GUI is up and running as normal as far as i can tell. I will do the usual configurations and report back with any issues.
phew, I was waiting for someone with this router to try it out, I'll do the same, I'm on the build that got removed and 3 days of uptime I've had zero issues with the GUI so unlikely this build will have issues either.
Man you are lame and no damn help to the rest of us... but yeah i was very apprehensive too but it is the least i can do to help because i can't make one of these firmware and stock firmware just makes me want to hurl the router at Buffalo and start cursing.
Thanks BS & Kong......those names sound like CSGO player names,
I have a small server rack which is used for some game servers and my website, the last I jumped the gun and installed a version with a broken gui it locked me out completely, no ssh no telnet nodda. had to open the router and reflash with a serial cable which I'm glad I bought but it was a pain in the ass enough to make me not be the 1st guy that jumps off the bridge.
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Working
Reset: Yes via erase nvram
Errors: None so far
Previous: r32597
GUI is up and running as normal as far as i can tell. I will do the usual configurations and report back with any issues.
phew, I was waiting for someone with this router to try it out, I'll do the same, I'm on the build that got removed and 3 days of uptime I've had zero issues with the GUI so unlikely this build will have issues either.
Man you are lame and no damn help to the rest of us... but yeah i was very apprehensive too but it is the least i can do to help because i can't make one of these firmware and stock firmware just makes me want to hurl the router at Buffalo and start cursing.
Thanks BS & Kong......those names sound like CSGO player names,
I have a small server rack which is used for some game servers and my website, the last I jumped the gun and installed a version with a broken gui it locked me out completely, no ssh no telnet nodda. had to open the router and reflash with a serial cable which I'm glad I bought but it was a pain in the ass enough to make me not be the 1st guy that jumps off the bridge.
"The words of a man whom is afraid to face the challenges of being a man"----Brimmy!
I too had to get a TTL USB so it is probably the same flash we both had an issue with. I was just messing with yuh.
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Working
Reset: Yes via erase nvram
Errors: None so far
Previous: r32597
GUI is up and running as normal as far as i can tell. I will do the usual configurations and report back with any issues.
phew, I was waiting for someone with this router to try it out, I'll do the same, I'm on the build that got removed and 3 days of uptime I've had zero issues with the GUI so unlikely this build will have issues either.
Man you are lame and no damn help to the rest of us... but yeah i was very apprehensive too but it is the least i can do to help because i can't make one of these firmware and stock firmware just makes me want to hurl the router at Buffalo and start cursing.
Thanks BS & Kong......those names sound like CSGO player names,
I have a small server rack which is used for some game servers and my website, the last I jumped the gun and installed a version with a broken gui it locked me out completely, no ssh no telnet nodda. had to open the router and reflash with a serial cable which I'm glad I bought but it was a pain in the ass enough to make me not be the 1st guy that jumps off the bridge.
"The words of a man whom is afraid to face the challenges of being a man"----Brimmy!
I too had to get a TTL USB so it is probably the same flash we both had an issue with. I was just messing with yuh.
reverting back to previous version. router becomes unresponsive after a couple hours. at least this time a power cycle is enough to get it back I wish I would have saved the version that got pulled.
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Working
Reset: Yes via erase nvram
Errors: None so far
Previous: r32597
GUI is up and running as normal as far as i can tell. I will do the usual configurations and report back with any issues.
phew, I was waiting for someone with this router to try it out, I'll do the same, I'm on the build that got removed and 3 days of uptime I've had zero issues with the GUI so unlikely this build will have issues either.
Man you are lame and no damn help to the rest of us... but yeah i was very apprehensive too but it is the least i can do to help because i can't make one of these firmware and stock firmware just makes me want to hurl the router at Buffalo and start cursing.
Thanks BS & Kong......those names sound like CSGO player names,
I have a small server rack which is used for some game servers and my website, the last I jumped the gun and installed a version with a broken gui it locked me out completely, no ssh no telnet nodda. had to open the router and reflash with a serial cable which I'm glad I bought but it was a pain in the ass enough to make me not be the 1st guy that jumps off the bridge.
"The words of a man whom is afraid to face the challenges of being a man"----Brimmy!
I too had to get a TTL USB so it is probably the same flash we both had an issue with. I was just messing with yuh.
reverting back to previous version. router becomes unresponsive after a couple hours. at least this time a power cycle is enough to get it back I wish I would have saved the version that got pulled.
I feel there is some sort of debug cycle that needs adjusting because i am seeing these in my syslogs....
Jul 20 15:46:00 user.info : Maybe httpd had died, we need to re-exec it
Jul 20 15:46:00 user.info : httpd : http daemon successfully stopped
Jul 20 15:46:00 user.info : httpd : https daemon successfully started
Jul 20 12:35:08 daemon.debug process_monitor[2323]: We need to re-update after 3600 seconds
Jul 20 12:35:08 daemon.info process_monitor[2323]: set timer: 3600 seconds, callback: ntp_main(
I am still using it to see what happens. My GUI is still working at the moment.
Posted: Thu Jul 20, 2017 16:32 Post subject: Linksys WRT610NV1 with r32753 *not working*
Router: Linksys WRT610Nv1
Firmware:r32753
Kernel:Unknow
Status:No web UI, system is up in telnet 192.168.1.1
Reset: all but do not resolve (30/30/30, erase nvram, mtd)
Errors: No web UI
Hello,
after several tries i could confirm that r32753 with Linksys WRT610Nv1 *do not work*.
There's *NO* web UI.
Only Telnet is available.
No 30/30/30, no erase nvram, no mtd procedure give back the web UI.
There's no way to load fw in any way (no tftp, no scp, no wget)
The only way to restore the router is putting in Management Mode and only under WindowsXP!!
I suggest do not install it r32753 on Linksys WRT610Nv1.
Regards.
Last edited by tsw on Thu Jul 20, 2017 18:15; edited 1 time in total
Joined: 18 Jul 2017 Posts: 45 Location: Wisconsin, USA
Posted: Thu Jul 20, 2017 17:38 Post subject: Update
Router: Linksys EA6500 V1
Firmware Version: DD-WRT v3.0-r32753 giga (07/19/17)
Kernel Version: Linux 3.10.107 #15205 Wed Jul 19 08:52:37 CEST 2017 mips
Status: Working
Reset: No
Errors: GUI becomes unresponsive, Internet connectivity dropped after 1 day up time.
Besides the gui being intermittent it appears connectivity is lost after a decent period of up time. Up time was roughly 1 day 6 - 10 mins and internet connectivity dropped at router. Wired and wireless all stopped. Rebooting router returned operation to normal for now will continue on same firmware currently to see if problem reoccurs.
I'm interested too in this implementation. I have an E3000 in K2.6 r32597 because I have an 200Mbit connection so I need the most I can squeeze (tested K3.X but lost a lot of speed as is normal).
So how is the status of that implementation?
(hope that implementation is for my device too and I'm not saying stupid things)
I'm interested too in this implementation. I have an E3000 in K2.6 r32597 because I have an 200Mbit connection so I need the most I can squeeze (tested K3.X but lost a lot of speed as is normal).
So how is the status of that implementation?
(hope that implementation is for my device too and I'm not saying stupid things)
If is someone tested TL901 v1 v3,TL743v2,TL941 v3.2 v3.5 v3.6,TLWR740N v4
please tell me test results i have small buget but i wanna be up to date,dont wanna be bricked again