Attached USB device partition is not mounted to /opt anymore
Code:
--- /dev/sda1
Block device, size 1.863 GiB (2000322048 bytes)
Ext4 file system
Volume name "opt"
UUID 5CC37665-D64A-4FB5-AA1F-F8B7720C8094 (DCE, v4)
Last mounted at "/opt"
Volume size 1.863 GiB (2000318464 bytes, 488359 blocks of 4 KiB)
/dev/sda1 mounted to /opt
Have you also checked with mount on console? GUI displays the same, but it is NOT mounted. I tried to reapply the UUID manually again in the GUI but this crashed the whole router.
Posted: Fri Aug 11, 2017 11:03 Post subject: WLAN stops for shorter/longer periods of time
Router: DIR-860L A1
Firmware: DD-WRT v3.0-r33010M kongac (c) 2017 NewMedia-NET GmbH
Previous: 32700M
Release: 08/09/17
Kernel: Linux host 4.4.80 #422 SMP Wed Aug 9 20:13:10 CEST 2017 armv7l DD-WRT
Status: LAN ok / WLAN stops other times unstable
Reset: No
Errors: Seems 33010M and 32700M both have prolems keeping WLAN stable.
In the beginning wifi works fast but e.g. once two devices on WLAN starts it starts getting unstable. I've experienced that nothing happens with usb device/syncthing running. So I have removed the usb stick and syncthing. Now it only temporarily locks the wifi (at least for now), but it is still impairing the 'user experience'.
My experience is that when one wlan device actively downloads (in this case stream) then the other devices does not seem to be able to download even though the device is connected to the router.
Turning on and off SFE (and rebooting) does not seem to make a difference.
At the moment I have not made a reset of the configuration, but I did that on 32700M.
For those curious about the syncthing setup it was as a startup script:
mount --bind /tmp/mnt/sda/jffs /jffs
mount --bind /tmp/mnt/sda/opt /opt
mount --bind /opt /mmc
/tmp/mnt/sda/home/user/syncthing/program/syncthing -gui-address="https://10.3.2.1:8384" -home="/mnt/sda/home/user/syncthing/config"
The last working running setup I ran on the router was kong build 30600M which also worked with syncthing.
if this also is the case with your setup then file a bug report at: http://svn.dd-wrt.com/
That sounds interesting as it also ext4, unfortunately for jffs I have another ext4 partition on the usb stick and that works fine. It just does not mount the extend partition to /opt/. I have mounted the second partition as smbshare which works fine, so I assume that it is not related to a broken partition or the usb stick itself.
if this also is the case with your setup then file a bug report at: http://svn.dd-wrt.com/
That sounds interesting as it also ext4, unfortunately for jffs I have another ext4 partition on the usb stick and that works fine. It just does not mount the extend partition to /opt/. I have mounted the second partition as smbshare which works fine, so I assume that it is not related to a broken partition or the usb stick itself.
My Setup was done all through the GUI.
USB Enabled / Storage Support / Automatic Mounting ==> worked as advertised.
I doubt that the issue is a missing module ... as it worked out of the box for me.
if this also is the case with your setup then file a bug report at: http://svn.dd-wrt.com/
It is only missing in the 8MB build due to size limitation.
Some drives mostly sandisk have issues, they need to long to communicate, usually they mount if you press apply on the usb page again, but they do not come up right after a reboot. _________________ KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
I'd say the app itself is buggy as WINSCP has never had such a problem on my routers with any of Kong's builds. _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
I'd say the app itself is buggy as WINSCP has never had such a problem on my routers with any of Kong's builds.
It is possible, but the same FAR Manager have no such problem with 31870M build. On the other side, i've just tested winscp and, yes, it works ok.
Ok, i'll write to FAR developers.
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Sat Aug 12, 2017 12:37 Post subject:
Just flashed the updated 33010 build on my R6300v2 and R7000 units.
Happy to report that the NTP time for Client Bridge and Repeater Bridge is now fixed. It automatically updates the NTP time at the 2 minute interval after boot-up.
Thanx, Kong.
redhawk _________________ The only stupid question....is the unasked one.
Joined: 18 Feb 2007 Posts: 87 Location: Bern, Switzerland
Posted: Sat Aug 12, 2017 14:42 Post subject:
Router: Buffalo WZR-1750DHCP
Firmware: DD-WRT v3.0-r33010M kongac (08/09/17)
Kernel: Linux 4.4.80 #422 SMP Wed Aug 9 20:13:10 CEST 2017 armv7l
Status: Up and running
Reset: No
Errors: None
NTP for Client Bridge is now working with 08/09/17 build.
Current basic config:
- WAN: DHCP
- IPv4 only
- Custom DDNS
- Wireless: Regulatory Domain = UNITED_STATES, wl0 Mixed 52+58 WPA2 Personal AES, wl1 Mixed 1 WPA2 Personal AES, wl1.1 Guest WPA2 Enterprise AES
- PPTP Server, OpenVPN Server TUN
- FreeRadius Server
- Port forwarding including WOL
- QoS
- JFFS2 on Internal Flash Storage
- USB3 stick mounted
- Samba and FTP _________________ Deployed:
Buffalo WZR-1750 - v3.0-r38580M kongac (02/05/19) - Router
Buffalo WZR-1750 - v3.0-r38580M kongac (02/05/19) - Client Bridge
Buffalo WZR-1750 - v3.0-r38100M kongac (12/27/18) - Router
Linksys WRT320 -> E2000 - v3.0-r33772 K30 mega (11/16/17) - Client Bridge
Joined: 15 Feb 2015 Posts: 22 Location: San Jose, CA, USA
Posted: Sat Aug 12, 2017 15:52 Post subject: R8500 - High TX Error on Wireless
Router: Netgear R8500
Firmware: DD-WRT v3.0-r33010M kongac (08/09/17)
Kernel: Linux 4.4.80 #422 SMP Wed Aug 9 20:13:10 CEST 2017 armv7l
Status: Up and running for 18 hours
Reset: ERASE NVRAM with fresh config
Errors: High TX Error Count on all Wireless
Just flashed the updated 33010 build on my R6300v2 and R7000 units.
Happy to report that the NTP time for Client Bridge and Repeater Bridge is now fixed. It automatically updates the NTP time at the 2 minute interval after boot-up.
Thanx, Kong.
redhawk
I can confirm NTP client is working again on the Netgear R6300V2.
Build 33000M had 9 days of uptime, upgraded to this build to get the latest fixes and test it out.
Router: 2x R7000
Firmware: 33000M -> 33010M
Kernel: Linux 4.4.79 #409 SMP -> Linux 4.4.80 #422 SMP Wed Aug 9 20:13:10 CEST 2017 armv7l
Status: Both Working without SFE & Monitoring
Reset: No
Errors: None so far
UpTime: over an hour
#1 R7000 (WAN + HE-IPv6 + OpenVPN Client#1)
- Disabled SFE
- IPv4 + HE IPv6 via 6in4 Static Tunnel
- USB Custom Startup Script for Route Tables, OpenVPN Client & Cron Scripts
- GUI Firewall & Startup Scripts
- WiFi Disabled
- SPI with non-filtered Multicast
- WAN port -> Cable Modem
- DNSCrpyt for IPv4 & IPv6
- NTP with Blank IP
- Cron Job - Monitor WAN & OpenVPN Connections
- DDNS Custom with DNSoMatic
- 6 BRs, 9 VLANS & 6 Assignments
- SSH (WAN Access), Telnet & Syslog
- WAN Traffic Disabled
- USB Storage with Auto Mount for Scripts Only
- ebtables + ip6tables used
- YAMon 3.3.2
#2 R7000 (WiFi + OpenVPN Client#2)
- Disabled SFE
- IPv4 Only
- USB Custom Startup Script for OpenVPN Client
- GUI Firewall Script
- 2.4Ghz Radio with 3 SSIDs (BW 40Mhz)
- 5Ghz Radio with 2 SSIDs (BW 80Mhz)
- SPI with non-filtered Multicast
- WAN Port (static IP) Assignment to vlan8 -> Vlan Switch
- DNSCrpyt for IPv4
- NTP with Blank IP
- Cron Job - Monitor OpenVPN Connection
- 5 BRs, 7 VLANS & 11 Assignments
- SSH (local only), Telnet & Syslog
- WAN Traffic Disabled
- ebtables used
- USB Storage with Auto Mount for Scripts Only
Update 20170909...
I have this build running on 2x R7000 and a family members R7000 with over 25 days uptime and no down time. Yippy!!
Some of the issues I ran into, was one time the dnscrypt-proxy crashed on the family R7000 and lost DNS services. Also in the pass I have run into issues where the Internet connect cuts out after 5 to 7 days of uptime; unable to pin point if it's a build or modem issue. I have them ironed out with cron jobs to check WAN, VPN & DNS connections and restart them if needed. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531