mingyech
DD-WRT Novice
Joined: 20 Aug 2017
Posts: 1
|
 Posted: Sun Aug 20, 2017 12:45 Post subject: Client mode can't connect to main AP |
 |
Hello people, I can't seem to find a solution to this problem anywhere. I have a TP-LINK TL- WR841ND v11 and I am trying to use the client mode(NOT Client Bridge). After I have configured the settings from the wiki(http://www.dd-wrt.com/wiki/index.php/Client_Mode) I am not getting any intenet. The wan IP is 0.0.0.0. I went to status, then wireless, and it shows the channel is unknown, and there is nothing in the Access point in the wireless node section, and it randomly about every 10 to 20 seconds it connects to the AP and it shows up in the Acess point in the wireless node section, and the Channel goes to 1, but it will disappear in 2 to 6 seconds.
I had also used a wireless repeater connected to the AP and my dd-wrt connected to the repeater. And it work flawlessly, as soon I set it up it connects. But I want the dd-wrt to connect to the AP directly.
Any suggestions would be appreciated, thank you![/url] |
|
