Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 3:10 Post subject:
goatfish wrote:
BrainSlayer wrote:
dd-wrt may have a different mac order. yes
Now that i tested and work and but am not getting the speed
I cant seem flash it back using tftpd method
what speed dont you get. please be more specific _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 3:27 Post subject:
by wifi by cable. and if by wifi. have you checked cable and whats your wifi settings (i hope you do not use tkip or wep encryption .this disables 802.11ac/n) was it done with 2.4 ghz or 5 ghz (its unlikelly to get 220 mbit with 2.4 ghz also with tplink)
questions over questions _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
by wifi by cable. and if by wifi. have you checked cable and whats your wifi settings (i hope you do not use tkip or wep encryption .this disables 802.11ac/n) was it done with 2.4 ghz or 5 ghz (its unlikelly to get 220 mbit with 2.4 ghz also with tplink)
questions over questions
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 3:38 Post subject:
thats very curious. with lan->wan nat/gateway tests i get 800 mbit _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
I confirm that I was able to flash my Archer C7 v4 from the TP-Link Web GUI using the images provided. Thanks again!
However, I got an "Unable to upgrade" error message on the Archer C9 v3.
i hope you used the specific file for the c9. for sure you cannot use the c7 file for the c9. the other user here succeeded with it. maybe you have a router from a other region where i do not know the region code yet. but need to know which model it is then (EU, US, RU, etc.)
I used the c9 file of course. TP-Link's web GUI throws the 'Unable to upgrade' error when I try to flash the c9 factory-to-ddwrt.bin image. I have the c9 v3 EU version.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 15:48 Post subject:
try to flash a original tplink firmware and send me the image which worked for you for analysing _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 15:52 Post subject:
found it. there is a typo in the image. will fix that once i'm back at home _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 20:45 Post subject:
here the fix for the archer c9 v3/v4 _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
And in there you'll see both the (I think) newest dd-wrt build and the original image.
No those two files are for flashing from stock to ddwrt for first time and the second for upgrading from previous version respectively. Usually there is a webrevert file there to go back to stock.
