LichtiMC i guess you can turn off radio via cron script instead... on one of my routers i have this script to
turn on/off business hours only
0 18 * * 1,2,3,4,5 root wl -i eth1 radio off
0 6 * * 1,2,3,4,5 root wl -i eth1 radio on
Unfortunately this doesn't work either. Once eth1 is disabled by cmd "wl -i eth1 radio off" I can't reenable it with "wl -i eth1 radio on"
Somewhere I read, that for enabling wifi I need to do
stopservice nas
wl -i eth1 radio on
startservice nas
This works, to bring the wifi up again, but the problem regarding the crash after a few hours remains:
Quote:
I guess it has to do smth. with dnsmasq. After these dnsmasq-logging-entries the router is dead:
Code:
10.06.2017 02:02 10.06.2017 02:02 system Info process_monitor[16547] set timer: 3600 seconds, callback: ntp_main()
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] read /etc/hosts - 21 addresses
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using 2 more local addresses
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using nameserver 8.8.4.4#53
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using nameserver 8.8.8.8#53
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain example.com
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain example.org
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain example.net
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain invalid
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain local
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain localhost
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain onion
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain test
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] reading /tmp/resolv.dnsmasq
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using 2 more local addresses
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain example.com
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain example.org
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain example.net
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain invalid
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain local
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain localhost
10.06.2017 02:02 10.06.2017 02:02 user-level Info dnsmasq : dnsmasq daemon successfully started
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain onion
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] using local addresses only for domain test
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq-dhcp[16562] DHCP, IP range 192.168.10.101 -- 192.168.10.199, lease time 1d
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify
10.06.2017 02:02 10.06.2017 02:02 system Info dnsmasq[16562] started, version 2.78 cachesize 1500
10.06.2017 02:02 10.06.2017 02:02 system Debug process_monitor[16547] We need to re-update after 3600 seconds
10.06.2017 02:02 10.06.2017 02:02 user-level Info process_monitor successfully started
10.05.2017 23:59 10.05.2017 23:59 user-level Debug ttraff: data for 5-10-2017 commited to nvram
10.05.2017 23:57 10.05.2017 23:57 user-level Info nas : NAS daemon successfully stopped
10.05.2017 23:57 10.05.2017 23:57 user-level Info NAS : NAS lan (wl1 interface) successfully started
10.05.2017 23:57 10.05.2017 23:57 user-level Info nas : NAS daemon successfully stopped
10.05.2017 23:57 10.05.2017 23:57 user-level Info nas : NAS daemon successfully stopped
Does anybody know why the router loses the connection and what I can do against it? Thanks.
Router: ASUS RT-AC68U
Firmware: DD-WRT v3.0-r33435M kongac (10/08/17)
Previous: 31870M
Status: Working with issues
Reset: Yes.
Errors:
1. After router boots-up, NTP won't work. As a result, DNSCrypt won't work, and - no internet.
To fix the situation, i have to disable DNSCrypt, click Save and Apply, wait a couple of second for the router to sync the correct time, then enable DNSCrypt back again, and click Save and Apply. NTP server is 89.109.251.23
Build 31870M have no such problem.
2. DDNS Force Update Interval does not work.
When router boots up, it does one synchronization:
Code:
Thu Jan 1 03:00:17 1970: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.
Thu Jan 1 03:00:17 1970: INADYN: IP read from cache file is 'xx.xx.xx.xx'. No update required.
Router: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r33435M kongac (10/08/17)
Previous: DD-WRT v3.0-r32170M kongac (06/11/17)
Kernel: Linux 4.4.89 #448 SMP Sun Oct 8 10:09:05 CEST 2017 armv7l
Previous: Linux 4.4.70 #338 SMP Sun Jun 11 00:36:49 CEST 2017 armv7l
Status: No issues, yet
Reset: No (upgrade via admin pages)
Errors: No, yet
Uptime: 9 min
Router: ASUS RT-AC68U
Firmware: DD-WRT v3.0-r33435M kongac (10/08/17)
Previous: 31870M
Status: Working with issues
Reset: Yes.
Errors:
1. After router boots-up, NTP won't work. As a result, DNSCrypt won't work, and - no internet.
To fix the situation, i have to disable DNSCrypt, click Save and Apply, wait a couple of second for the router to sync the correct time, then enable DNSCrypt back again, and click Save and Apply. NTP server is 89.109.251.23
Build 31870M have no such problem.
2. DDNS Force Update Interval does not work.
When router boots up, it does one synchronization:
Code:
Thu Jan 1 03:00:17 1970: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.
Thu Jan 1 03:00:17 1970: INADYN: IP read from cache file is 'xx.xx.xx.xx'. No update required.
No further ddns activity after that.
Kong has NTP Server IPs setup in the firmware, therefore you can leave the "Server IP/Name" blank.
I do recall in the past my DNSCrypt would would not start and many other services would not start because of the router date was not set at the beginning of boot. So I added these extra commands in Startup & DNSMasq, these are my examples to get the services I was using up and running...
In Administration -> Commands -> Startup
# Use Build Date & Time at Startup
date 201710081009
In Services -> Additional DNSMasq Options
# Force DNS Server when DNSCrpyt is not Certified
server=/ntp.org/208.67.220.220
server=/ipv4.tunnelbroker.net/208.67.220.220
server=/updates.dnsomatic.com/208.67.220.220
server=/updates.opendns.com/208.67.220.220
server=/ipvanish.com/208.67.220.220
server=/usage-monitoring.com/208.67.220.220 _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Posted: Mon Oct 09, 2017 17:52 Post subject: Asus RT-AC68U
Router: Asus RT-AC68U (H/W Ver: A1)
Firmware: DD-WRT v3.0-r33435M kongac (10/08/17)
Previous: DD-WRT v3.0-r33435M kongac (10/04/17)
Kernel: Linux 4.4.89 #448 SMP Sun Oct 8 10:09:05 CEST 2017 armv7l
Previous: Linux 4.4.89 #446 SMP Wed Oct 4 07:56:30 CEST 2017 armv7l
Status: ok
Reset: no (ddup --flash-remote http://www.desipro.de/ddwrt/K3-AC-Arm/dd-wrt.v24-K3_AC_ARM_STD.bin)
Errors: no
Uptime: 1:27
[quote="LichtiMC"][b]LichtiMC[/b] i
...
Yes I do have the same issue. 2 to 3 hrs the 2.4G WiFI is working and in some way even not. All my IP Cam are not connected not any more after some time. Only option was a restart this has happened 3-5 times, now I switched DNSMasq for DHCP and DNS OFF and the router is working well again.
So I guess there is some mess in the last update of DNSMasq.
SVN showed that:
18:06 Changeset[33430] by brainslayer
update dnsmasq
This update was the update from 2.77 to 2.78 version not sure if the new version of dnsmasq itself has some issues or the build.
Maybe if I do have some time I will setup the router new or I work without dnsmasq, since one day no issues any more.
Update: did nvram earse and setup all new... and it is working right now as it should.
Last edited by dreammaster1975 on Fri Oct 13, 2017 7:28; edited 1 time in total
On my R7000 the http server freeze after a couple of hours (I'm using HTTPS with my certificates). Today I couldn't even ssh to the r7000 (seen login banner but stuck after).
I'm trying the latest build to see if something change.
Any idea of what can be causing this ? I've seen nothing in the logs (from a remote syslog).
Posted: Tue Oct 10, 2017 7:57 Post subject: 5GHz band wl_1 disappears from r7000 settings
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r33435M (10/08/17)
Kernel Version: Linux 4.4.89 #448 SMP Sun Oct 8 10:09:05 CEST 2017 armv7l
Upgraded: 33010M
Reset: flashed with factory defaults
Status: Up and running
Errors: Yes, 5 GHz band disappears.
Hey,
My wl_1 channel disappears from the router settings despite the channel still being available most of the time, similar to this thread: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=939616. It's just not there, not under wireless settings or wireless status, as if the router lacked the functionality. I had previously set the then-present 5GHz band with an SSID and a WPA2 password. I'm not sure how long it took for it to disappear.
I've had this problem with previous releases, I hope it's possible to fix. In the meantime I will try restarting the router/setting to factory defaults and setting manual settings for the 5GHz channel if it surfaces again.
Thanks for all you do Kong and Brainslayer, you are both incredible individuals.
