Router Model: TP-Link Archer C7 V2
Update by GUI from: r33006 to r33492
Status: Operational
Reset: No
Errors: No new problems compared with 33006
Used features: USB storage x2, PPTP VPN, FTP, DDNS, SFE, Fixed IP, Wi-Fi only 5Ghz
Good things: Indeed seem to boot up a bit quicker than before but still quite slow.
Still not ok: the 2 USB storage are mounted at random.. one time sda1 next time sdb1. Hard to maintain a proper security of the folders on these. What is better than on 33006 is that now the internet connection doesn't drop when the second USB storage is added.
Router Model: TP-Link 841N V9
Update by GUI from: r33006 to r33492
Status: Operational
Reset: No
Errors: No
Used features: Wi-Fi 2.4Ghz (wired connection to the C7 above)
Router Model: TP-Link 740N V4
Update by GUI from: r33006 to r33492
Status: Operational
Reset: No
Errors: No
Used features: Wi-Fi 2.4Ghz (Client bridged)
Router Model: Linksys WRT160NL
Update by GUI or by TFTP from: r33006 to r33492
Status: Bricked
Reset: No
Errors: blinking power LED and the booting stops
PS: Yes, I have seen that for others is working... for me it is not. Ticket: 5959
Last edited by numerci on Sun Oct 15, 2017 7:32; edited 1 time in total
Thanks! Everything up and running again! Created new keys with OpenVPN 2.4.4. including TLS auth key. One more thing. In the previous DD-WRT build I used, it was not necessary to forward a port. With build 33492 I had to do that, otherwise the VPN-server was reachable via LAN only.
Glad you got it sorted.....
If your router is the public WAN holding gateway you shouldn't have to manually forward anything.... It should do that itself.
Using the GUI to set only extra added for ovpn server:
If using Redirect default Gateway in ovpn server Additional Config - 'example = 192.168.1.0 /24 is routers LAN & 192.168.1.1 is routers IP' -
push "route 192.168.1.0 255.255.255.0"
push "dhcp-option DNS 192.168.1.1"
firewall - example server net = 10.10.10.0 255.255.255.240
iptables -t nat -A POSTROUTING -s 10.10.10.0/28 -j MASQUERADE
additional DNSMasq options -
interface=tun2
and dat should work - but then again I don't have your router ... so who knows
Router Model: Linksys WRT160NL
Update by GUI or by TFTP from: r33006 to r33492
Status: Bricked
Reset: No
Errors: blinking power LED and the booting stops
PS: Yes, I have seen that for others is working... for me it is not. Ticket: 5959
I remember your WRT160Nl had a differ flash ID than either of mine.
<4>[ 0.390000] ->Oops: flash id 0xef4017 .
And it would not even TFTP some builds????
I added to http://svn.dd-wrt.com/ticket/5959#comment:9
Thanks! Everything up and running again! Created new keys with OpenVPN 2.4.4. including TLS auth key. One more thing. In the previous DD-WRT build I used, it was not necessary to forward a port. With build 33492 I had to do that, otherwise the VPN-server was reachable via LAN only.
Glad you got it sorted.....
If your router is the public WAN holding gateway you shouldn't have to manually forward anything.... It should do that itself.
Using the GUI to set only extra added for ovpn server:
If using Redirect default Gateway in ovpn server Additional Config - 'example = 192.168.1.0 /24 is routers LAN & 192.168.1.1 is routers IP' -
push "route 192.168.1.0 255.255.255.0"
push "dhcp-option DNS 192.168.1.1"
firewall - example server net = 10.10.10.0 255.255.255.240
iptables -t nat -A POSTROUTING -s 10.10.10.0/28 -j MASQUERADE
additional DNSMasq options -
interface=tun2
and dat should work - but then again I don't have your router ... so who knows
Just removed the portforward. Still works Thanks for your reply, so glad everything's OK again!
Can some one confirm if u can upgrade to the latest firmware on asus rtac66u bb1 ,initially i flahsed my router with ac68u dd wrt where my vpn client does not connect auto after rebooting the router .and now if i want to upgrade which firmware i should use ac66u or ac68u please advise
Can some one confirm if u can upgrade to the latest firmware on asus rtac66u bb1 ,initially i flahsed my router with ac68u dd wrt where my vpn client does not connect auto after rebooting the router .and now if i want to upgrade which firmware i should use ac66u or ac68u please advise
Router Model: Linksys WRT160NL
Update by GUI or by TFTP from: r33006 to r33492
Status: Bricked
Reset: No
Errors: blinking power LED and the booting stops
Update on the above... I have finally managed to successfully update from 33006 to 33492 on the WRT160NL. It worked only from UI using the factory to DD-WRT bin combined with reset to defaults. After this done a second update with the usual file.
Seem to be working fine now.
Successful update from DD-WRT v3.0-r30880 std (11/14/16).
Did a factory reset before update to the latest firmware just in case.
Update process went smoothly, no errors so far (running it for an hour or so).
Router Model: Linksys WRT160NL
Update by GUI or by TFTP from: r33006 to r33492
Status: Bricked
Reset: No
Errors: blinking power LED and the booting stops
Update on the above... I have finally managed to successfully update from 33006 to 33492 on the WRT160NL. It worked only from UI using the factory to DD-WRT bin combined with reset to defaults. After this done a second update with the usual file.
Seem to be working fine now.
http://svn.dd-wrt.com/ticket/5959#comment:12
Try this one if you want.... but it had same affect on mine as r33492.
The one I had to TFTP -- went very fast but loading full FW and light stop blinking takes several minutes
attached r33524 wrt160nl-firmware.bin
FOR WRT160NL ONLY
1. Update by GUI failed... blinking power LED and boot sequence stopped. Brick.
2. Update by TFTP worked fine. Version 33524 seem to be working fine as Client Bridge on WRT160NL.
Posted: Mon Oct 16, 2017 0:16 Post subject: DD-WRT v3.0-r30342 (07/30/16)
It seems that there are some major updates in this version, can anyone tell me is it safe to update from my over a year old software to this one via web?
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Mon Oct 16, 2017 8:53 Post subject: Re: DD-WRT v3.0-r30342 (07/30/16)
rafb wrote:
It seems that there are some major updates in this version, can anyone tell me is it safe to update from my over a year old software to this one via web?
my router is 1043ND v2.1
if you run an old build yep its safe to update to 33492 via GUI (web)... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
