Posted: Thu Dec 27, 2018 19:16 Post subject: Buffalo WHR-HP-G300N bricked
Hallo zusammen,
ich habe versucht eine opwnWRT Firmware auf dem WHR-HP-G300N zu installieren und es war wohl für die falsche Version/Chipset...
Habe mittels mtd -r write openwrt.bin linux geflashed.
Seit dem leuchtet die DIAG durchgehend rot.
Joined: 21 Dec 2011 Posts: 92 Location: São Paulo - Brazil
Posted: Thu Jan 03, 2019 18:36 Post subject: Buffalo recovery
Hi there!
I hope you can undestand me in english, as my german is not good.
If I understood it right, you got the tftp solution running (which is the hardest part), but you are using a wrong firmware version.
You have to download the right firmware for your region and for the exact router model. I, for example, own a WHR-301N, which uses the japanese version of the firmware, and when I tried to flash a US firmware I got the same error message you did.
Try again with firmware from other regions (i.e. downloaded from other buffalo sites worldwide), and double check the router model / revision.
Thx for your reply.
I'll try the original firmware from another location this weekend.
I've tried first tired in the german section... I wanted to try another post in the english section soon...
But very strange is, that i've also tried the delivered firmware wich came with the CD-ROM...
With this FW, the bootloader also threw the same error Error code 0: Unsupport MODEL