jwh7 DD-WRT Guru
Joined: 25 Oct 2013 Posts: 2670 Location: Indy
|
Posted: Wed Feb 28, 2024 0:23 Post subject: |
|
Necro'ing this since I've been messing w/ my remaining EA6900 (setting up for a sis-in-law and was helping a coworker using my other one) and thought I'd do a quick USB3 test. I moved them to DD long ago (since the install thread references to Xwrt) and this post had a decent list of reference posts.
Everything work fine these days (testing my Ventoy drive):
Linux version 4.4.302-st49 (OpenWrt GCC 13.1.0 r22658+9-2c530fcb97) #11042 SMP Fri Feb 23 03:17:45 +06 2024
Code: | [337705.037750] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[337705.059169] usb-storage 4-1:1.0: USB Mass Storage device detected
[337705.065835] scsi host0: usb-storage 4-1:1.0
[337706.067733] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
[337706.076954] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[337706.085029] sd 0:0:0:0: [sda] Write Protect is off
[337706.089929] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[337706.090146] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[337706.101424] sda: sda1 sda2
[337706.106432] sd 0:0:0:0: [sda] Attached SCSI removable disk
[337706.250834] ksmbd: kill command received
[337707.273859] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[337707.871975] Linux kernel CIFS/SMB SERVER 3.4.8 by Namjae Jeon <linkinjeon@kernel.org>
root@EA6900-9BF2:~# lsmod|grep hci
xhci_plat_hcd 2130 0
xhci_pci 2708 0
xhci_hcd 87533 2 xhci_plat_hcd,xhci_pci
ohci_pci 2271 0
ohci_hcd 24435 1 ohci_pci
ehci_pci 2926 0
ehci_hcd 35313 1 ehci_pci
usbcore 136186 9 usb_storage,xhci_plat_hcd,xhci_pci,xhci_hcd,ohci_pci,ohci_hcd,ehci_pci,ehci_hcd
root@EA6900-9BF2:~# df -h /tmp/mnt/sda?
Filesystem Size Used Available Use% Mounted on
/dev/sda1 59.6G 44.7G 14.9G 75% /tmp/mnt/sda1
/dev/sda2 31.7M 27.1M 4.6M 85% /tmp/mnt/sda2 |
hdparm tests:
/dev/sda1: Timing buffered disk reads: 254 MB in 3.01 seconds = 84.41 MB/sec
/dev/sda2: Timing buffered disk reads: 32 MB in 0.39 seconds = 81.08 MB/sec
Samba works fine too - though its much slower (like 22 MB/s). :-/ _________________ # NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4 |
|