Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Fri Oct 06, 2023 14:08 Post subject:
i do have few old Qualcomm clients and those behave very odd on Win10, similar to disconnected and then you need manually to reconnect...it doesn't want to auto connect on drops...and it's frustrating....
tried those with linux no problem...tried to fiddle with win 10 settingsor client drivers, no happiness at all...old drivers, new same effect...and i use vanilla 2.4ghz only ...it happens on all kind of routers Boadcom, Atheros-Quallcomm so, no idea what else to blame...problem solved with an usb wifi card... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Probably a client issue, but I'll mention anyway. For the last 3 builds, my wife's laptop with an older Qca61x4a chipset will not reconnect after the access point is rebooted. Windows shows no access points (all my access points are R7800s). Have to reboot the PC.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Fri Oct 06, 2023 20:34 Post subject:
dale_gribble39 wrote:
dpp3530 wrote:
Probably a client issue, but I'll mention anyway. For the last 3 builds, my wife's laptop with an older Qca61x4a chipset will not reconnect after the access point is rebooted. Windows shows no access points (all my access points are R7800s). Have to reboot the PC.
NO troubles at all with these guys ...then again they are on Debian OS
in picture the one between them is moto edge plus 2022 phone.
*********
built in WiFi on laptop
01:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
---
USB WiFi
Bus 001 Device 004: ID 13b1:003e Linksys AE6000 802.11a/b/g/n/ac Wireless Adapter [MediaTek MT7610U]
this machine does have builtin Intel Dual Band Wireless-AC 7260 but I could never get it to work worth
crap over 'bout 20 minutes....tried many many times with all you can think of. I reckon it's just trash.
I have it disabled in machines BIOS and very happy with Linksys AE6000
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Fri Oct 06, 2023 23:48 Post subject:
Didn't mean to hijack the thread. I did an reset on the IP stack and reinstalled the drivers. If that doesn't do it, I'm putting in a USB dongle and be done with it. _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
Router/Version: Linksys R7800
File/Kernel: 53562
Previous/Reset: 51184
Mode/Status: 5 GHz WDS Station (wlan0), 2.4 GHz AP (wlan1)
Issues/Errors: 2.4GHz keeps getting disassociated - been happening over several firmwares - 51184 is last know firmware where this doesn't happen
Oct 8 08:57:36 garage daemon.info hostapd: wlan1: STA c6:52:29:a0:6e:ff MLME: auth request, signal -59 (Accepted)
Oct 8 08:57:36 garage daemon.info hostapd: wlan1: STA c6:52:29:a0:6e:ff IEEE 802.11: authenticated
Oct 8 08:57:36 garage daemon.info hostapd: wlan1: STA c6:52:29:a0:6e:ff MLME: assoc request, signal -60 (Accepted)
Oct 8 08:57:36 garage daemon.info hostapd: wlan1: STA c6:52:29:a0:6e:ff IEEE 802.11: associated (aid 2)
Oct 8 08:57:37 garage daemon.info hostapd: wlan1: STA c6:52:29:a0:6e:ff RADIUS: starting accounting session 5B5152CCC41B015B
Oct 8 08:57:37 garage daemon.info hostapd: wlan1: STA c6:52:29:a0:6e:ff WPA: pairwise key handshake completed (RSN)
Oct 8 09:01:43 garage daemon.info hostapd: wlan1: STA c6:52:29:a0:6e:ff IEEE 802.11: disassociated
Oct 8 09:01:44 garage daemon.info hostapd: wlan1: STA c6:52:29:a0:6e:ff IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Oct 8 09:07:11 garage daemon.info hostapd: wlan1: STA f0:ad:4e:1d:f4:a0 IEEE 802.11: disassociated due to inactivity
Oct 8 09:07:12 garage daemon.info hostapd: wlan1: STA f0:ad:4e:1d:f4:a0 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r53562 std)
Kernel: Linux 3.10.108-d11 #141753 Tue Oct 3 03:46:51 +06 2023 mips
Status: working
Reset: No
Notes on configuration:
Station
Errors:
1. 5Ghz wireless light is not on (2.4Ghz light works)
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r53562 std)
Kernel: Linux 3.10.108-d11 #141751 Tue Oct 3 03:30:42 +06 2023 mips
Status: Working
Reset: None
Notes on configuration: Used for Wifi Lab (no internet)
Errors:
None
Router: Archer-A7 v5
Firmware: tplink_archer-a7-v5.bin (v3.0-r53562 std)
Kernel: Linux 3.18.140-d6 #181116 Tue Oct 3 05:55:41 +06 2023 mips
Status: Working
Reset: None
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
root@AP:~# ps | grep [i]rqbalance
root@AP:~# irqbalance -d
This machine seems not NUMA capable.
Prevent irq assignment to these isolated CPUs: 00000000
Prevent irq assignment to these adaptive-ticks CPUs: 00000000
Banned CPUs: 00000000
Package 0: numa_node -1 cpu mask is 00000003 (load 0)
Cache domain 0: numa_node is -1 cpu mask is 00000002 (load 0)
CPU number 1 numa_node is -1 (load 0)
Cache domain 1: numa_node is -1 cpu mask is 00000001 (load 0)
CPU number 0 numa_node is -1 (load 0)
Segmentation fault
root@AP:~#
Build seems to be good on r9k from both a performance and feature perspective.
R7800
Errors: WDS STA Virtual Int bug is still present. Rolled back to 51589 last good
https://svn.dd-wrt.com/ticket/7669 . Im gussing this is a bit complex to fix or is a core driver bug Sad. Similar bug was reported in MArvel forum considerably earlier., Luckily the old build still works with the newer builds on my internet facing r9k.
Down Graded from k6.1 r54203 to k4.9 r53562 to regain WAN & WG Speeds
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r53562 std (10/03/23)
Kernel Version: Linux 4.9.337 #2198 SMP Tue Oct 3 02:37:32 +07 2023 armv7l
Previous Build /Reset: r54203 K6.1 (Router Backup Set) / Router Swap, k4.9 Router Set (r52330) No, CLI Update-> reboot
Mode/Status: GW / Working Well and back to 1Gb/s WAN Speeds!
Issues/Errors: none / none
Services Used: DHCP-WAN,IPv6-6to4,NTP,WG-Client,VLAN-GUI,BR1-7,SSH,Syslog,Cron,USB-Storage,Entware DNSCrypt v2.1.2
Services Disabled: Both-Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r53562 std (10/03/23)
Kernel Version: Linux 4.9.337 #2198 SMP Tue Oct 3 02:37:32 +07 2023 armv7l
WiFi DD-WRT Firmware: firmware ver 10.4-ddwrt-9984-tW-13-7264 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 f46c9632
WiFi Vanilla Firmware: 10.4-3.18-00002 api 5 features no-p2p,mfp,peer-flow-ctrlllows-mesh-bcast,no-ps,peer-fixed-rate crc32 9959da8e
Previous Build/Reset: r54203 K6.1 (Router Backup Set) / Router Swap, k4.9 Router Set (r52330) No, CLI Update-> reboot
Mode/Status: GW(double-nat) & AP / Working Well and back to 1Gb/s WAN Speeds!
Issues/Errors: none / none
Services Used: Vanilla 2.4Ghz-20Mhz & 5Ghz-160Mhz Radios,Static-WAN,IPv6-6to4,NTP,2xWG-Clients,VAPx,VLAN-GUI,BR0-7,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.2
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba
Both running for 28 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
