Posted: Thu Dec 07, 2023 5:20 Post subject: New Build - 12/07/2023 - r54475
Welcome to Atheros r54475 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Thu Dec 07, 2023 9:16 Post subject:
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r54475 std (12/07/23)
Kernel Version Linux 6.1.65 #67 SMP Tue Dec 5 19:24:50 +07 2023 arm
update: CLI r54420 > r54475
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...Thanks BS and Team !
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r54475 std (12/07/23)
Kernel Version Linux 3.18.140-d6 #187090 Thu Dec 7 06:10:23 +06 2023 mips
update: GUI r54079 > r54475
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...Thanks BS and Team !
Router Model Netgear R9000 Nighthawk X10
Firmware Version DD-WRT v3.0-r54475 std (12/07/23)
Kernel Version Linux 4.9.337 #686 SMP Wed Nov 29 03:14:52 +07 2023 armv7l
update: CLI r54079 > r54475
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...Thanks BS and Team !
Router Model TP-Link TL-WR740Nv1
Firmware Version DD-WRT v3.0-r54475 std (12/07/23)
Kernel Version Linux 3.10.108-d11 #147450 Thu Dec 7 05:02:45 +06 2023 mips
update: GUI r53045 > r54475
reset: NO
mode: Gateway/WAP
status: Operational 1h+
errors: Nothing new, yet...Thanks BS and Team !
Don't have much time to test, but units are operational... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Sun Dec 10, 2023 8:47; edited 1 time in total
Router/Version: Netgear XR500 Nighthawk Pro Gaming (Install guide by egc)
Firmware: DD-WRT v3.0-r54475 std (12/07/23)
Kernel: Linux 6.1.65 #67 SMP Tue Dec 5 19:24:50 +07 2023 arm
Previous: DD-WRT v3.0-r54420 std (12/04/23)
Update Method: SSH / CLI using PuTTY with ‘firmware.bin’ install
Mode/Status: Gateway / Ok
Reset: No
Setup:
2.4 GHz N/G Mixed 20 MHz WPA2 - Vanilla, 2.4 GHz guest (VAP) WPA2
5.0 GHz AC/N Mixed 80 MHz WPA2 - Vanilla
IPv4, DHCP, DNSMasq, Static Leases, Port Forwarding
USB 3.2 Gen 1 (USB 3.0) Seagate One Touch 2TB STKB2000400 (exFAT), NAS, Samba (Restricted User/Password)
NTP Client
Wireguard Server
Wake-on-WAN (Internet)
Issues/Errors: None
I can confirm the Internight LED is on, but it is on even when it is not connected to the Internet (false/positive). _________________ Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
Have you tried both WDS and AP on the same firmwares ?? using the new roaming settings ???
Just curious...as there is lots of active WIP on the subject.. Im tempted to try WDS (R7800 + 1043v2)...
may give it a go soon..just too busy, as i just got back home _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Have you tried both WDS and AP on the same firmwares ?? using the new roaming settings ???
Tried WDS on both last build 54420. Did not fiddle with new roaming settings 802.11v, 802.11k, or MBO.
802.11r Support (FT) has been enabled on both although now there are a couple of new choices thrown in there I left a default.
wlan0 5GHz is the WDS link interface and the new roaming settings are not available on that Interface with this build.
So for now I would go back to 54248 on the STA to try out WDS.
Posted: Thu Dec 07, 2023 22:43 Post subject: New Build - 12/07/2023 - r54475
Netgear r7500v2 Up and running for 9 hours with sfe enabled but had to disable it again because it rebooted other than that seems like a good built thanks dd-wrt team.
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Fri Dec 08, 2023 14:14 Post subject:
Router/Version: Netgear R7800 x 3
File/Kernel: DD-WRT v3.0-r54475 std (12/07/23)
Previous/Reset: DD-WRT v3.0-r54420 std (12/04/23), no reset this time
Mode/Status: Gateway (SFE disabled), Access Point (VANILLA firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r), IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server, performance govenor + 2 wired access points (VANILLA firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r), performance govenor
Issues/Errors:
Up 19 hours. USB 2.0 working properly, haven't tested 3.0. Wireguard and OpenVPN servers working as expected. Speed (tested via nPerf.com) is close to or greater than what my ISP advertizes, both wired and wireless. Have not tried SFE, but based on Harb1's report above, I'll leave it disabled.
Thanks Brainslayer. Based on the number of commits on the last couple builds, you've been busy... _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
Netgear WNR2000v3
DD-WRT v3.0-r54475 std (12/07/23)
Linux 3.10.108-d11 #147482 Thu Dec 7 07:39:19 +06 2023 mips
GUI install over r43845 ...reset before & after
all looky ok & its wireless is good ...just not sure what gonna do
with silly thang ...it a pissy lil unit but works good
---
EDIT:
setup as simple WAP ..don't need it but it's there iffin I might.
forgot can't even get dmesg from poor thang and BS has stripped some other stuff for this bit less than 4MB flash but it still a good'n https://mrjcd.com/junk/dd-wrt/WNR2000v3/wnr200v3-r54475.html
Posted: Fri Dec 08, 2023 23:43 Post subject: Re: New Build - 12/07/2023 - r54475
Harb1 wrote:
Netgear r7500v2 Up and running for 9 hours with sfe enabled but had to disable it again because it rebooted other than that seems like a good built thanks dd-wrt team.
Feel like i should explain more it was fine for 9hours until i download the pc moba game smite which is 37 gb big. After the download was finished 1 to 3 minutes the router rebooted itself.
