Posted: Thu Dec 21, 2023 6:50 Post subject: New Build - 12/21/2023 - r54569
Welcome to Broadcom r54569 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 18 Mar 2014 Posts: 12922 Location: Netherlands
Posted: Thu Dec 21, 2023 12:04 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r54569M Community Build (12/21/23)
Kernel Version: Linux 4.4.302-st47 #1 SMP Thu Dec 21 08:15:11 CET 2023 armv7l
Upgraded from DD-WRT v3.0-r54475M Community Build (12/06/23) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: No not this time.
Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
Four WireGuard tunnels running, one Server, one site-to-site and two Clients in Fail-over group to Mullvad (of course with PBR to allow the WG server to use the WAN).
OpenVPN client and server tested and working but disabled.
DDNS (dynv6) working
NVRAM size 56K (NVRAM size should not be a problem with the Xvortex CFE)
Posted: Thu Dec 21, 2023 15:22 Post subject: Asus RT-AC68U + 2 Linksys E2000
Asus RT-AC68U
Firmware: DD-WRT v3.0-r54569 std (12/21/23) - (previous r52485)
Kernel: Linux 4.4.302-st47 #10697 SMP Tue Dec 19 05:13:42 +06 2023 armv7l
5Ghz (Mixed) with 80Mhz channel width (upper/lower): Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 22 min
CPU Temperature: CPU 63.6 °C / WL0 44.0 °C / WL1 44.0 °C
2 x E2000
Firmware: DD-WRT v3.0-r54569 mega (12/21/23) - (previous r52485)
Kernel: Linux 4.4.302-st47 #27591 Thu Dec 21 05:29:48 +06 2023 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: 41 min / 23 min
CPU Temperature: WL0 52.0 °C / WL0 54.8 °C
All devices working as AP's each with individual 1Gb wired connections to main firewalls
No issues so far, will update if experiencing any.
Posted: Thu Dec 21, 2023 15:33 Post subject: Unable to flash on trendnet-811DRU
I have been unable to flash any builds on the trendnet-811DRU since the one on November 1 (build 53843). I notice that the bin file size increased after that build from ~6 MB to ~12 MB. I don't get any errors while flashing. I just notice that the device reboots and then comes back still running 53843.
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r54569 std / Linux 4.4.302-st47 #10705 SMP Thu Dec 21 04:31:54 +06 2023 armv7l
Previous/Reset: r54545 / no
Mode/Status: Gateway / Up and running for 4:19 hours
CPU Temperature: CPU 62.5 °C / WL0 40.0 °C / WL1 0.0 °C (ambient temperature 16.0 °C)
Issues/Errors: Nothing significant
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55819
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Netgear R6700 v3 – Station Bridge
Firmware Version: DD-WRT v3.0-r54569 std (12/21/23)
Kernel Version: Linux 4.4.302-st47 #10697 SMP Tue Dec 19 05:13:42 +06 2023 armv7l
Temperatures: CPU 66.9 °C / WL1 53.6 °C
Current Time: Thu, 21 Dec 2023 18:11:49
Uptime: 30 min
Reset: No
CL install over r54545
No issues
Thank you BS and gurus. _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Router/Version: E3000
File/Kernel: broadcom_K3X/dd-wrt.v24-54569_NEWD-2_K3.x_mega-e3000.bin
Previous/Reset: 3.X mega 47911 / Yes
Mode/Status: wl1: Station (client), N/A mixed, not bridged. wl0: AP, Mixed, bridged. OpenVPN client with Kill Switch enabled. Some static leases.
Issues/Errors: No issues installing using webUI firmware upload. When I first connected to the router, I noticed the one wireless client (a Win10 computer connected to the 2.4GHz AP interface on the E3000) got disconnected a few times, but that seemed to have stopped. I looked at the OpenVPN log and it looks like there are a lot of disconnects.
Uptime: 1:26
Full disclosure, I'm a novice. I hope this is helpful.
Edit: 1. approximately 4Mbs down using OpenVPN, then approximately 27Mbs down using Wireguard (wow! thanks for the tip EGC!).
2. Noticed the time (hours and minutes) in Syslog was right on, but the date there showed Dec 31 on Dec 23. Elsewhere (current time under STATUS/ROUTER) shows the correct date and time. NTP client was enabled.
Joined: 18 Mar 2014 Posts: 12922 Location: Netherlands
Posted: Sat Dec 23, 2023 10:06 Post subject: Re: E3000
Rudey22 wrote:
Router/Version: E3000
File/Kernel: broadcom_K3X/dd-wrt.v24-54569_NEWD-2_K3.x_mega-e3000.bin
Previous/Reset: 3.X mega 47911 / Yes
Mode/Status: wl1: Station (client), N/A mixed, not bridged. wl0: AP, Mixed, bridged. OpenVPN client with Kill Switch enabled. Some static leases.
Issues/Errors: No issues installing using webUI firmware upload. When I first connected to the router, I noticed the one wireless client (a Win10 computer connected to the 2.4GHz AP interface on the E3000) got disconnected a few times, but that seemed to have stopped. I looked at the OpenVPN log and it looks like there are a lot of disconnects.
Uptime: 1:26
Full disclosure, I'm a novice. I hope this is helpful.
Consider using WireGuard instead of OpenVPN, it is much faster and easier to setup on this old router.
WireGuard and OpenVPN docs are stickies (first few threads) in the Advanced Networking forum.
If you are referring to this:
Quote:
20231222 20:10:12 MANAGEMENT: Client disconnected
20231222 20:10:13 NOTE: --mute triggered...
20231222 20:10:13 1 variation(s) on previous 3 message(s) suppressed by --mute
20231222 20:10:13 D MANAGEMENT: CMD 'log 500'
20231222 20:10:13 MANAGEMENT: Client disconnected
20231222 20:57:03 VERIFY OK: depth=2 C=PA O=NordVPN CN=NordVPN Root CA
20231222 20:57:03 NOTE: --mute triggered...
20231222 20:58:35 8 variation(s) on previous 3 message(s) suppressed by --mute
20231222 20:58:35 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:41776
20231222 20:58:35 D MANAGEMENT: CMD 'state'
20231222 20:58:35 MANAGEMENT: Client disconnected
20231222 20:58:35 NOTE: --mute triggered...
20231222 20:58:36 1 variation(s) on previous 3 message(s) suppressed by --mute
20231222 20:58:36 D MANAGEMENT: CMD 'state'
20231222 20:58:36 MANAGEMENT: Client disconnected
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Sat Dec 23, 2023 22:45 Post subject:
Router/Version: Asus RT-AC66U
File: dd-wrt-#####-Asus_RT-AC66U.trx
Firmware: DD-WRT v3.0-r54569 giga (12/21/23)
Kernel: Linux 4.4.302 #14944 Sun Mar 20 05:05:35 +07 2022 mips
Mode: Gateway - Wireguard Tunnel Server
Previous: r53662
Reset?: N
Status: Working
Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r54569_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-st47 #27587 Thu Dec 21 05:24:12 +06 2023 mips
Previous/Reset: r54517 / no
Mode/Status: Gateway / Up and running for 1 days, 1:19
CPU Temperature: WL0 47.8 °C (ambient temperature 20.1 °C)
Issues/Errors: Nothing significant
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55819
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
