Posted: Fri Jan 12, 2024 19:23 Post subject: New Build - 01/12/2024 - r54905
Welcome to Broadcom r54905 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Sat Jan 13, 2024 1:21 Post subject:
Router: Linksys WRT160N v1.1
Version: DD-WRT v3.0-r54905M std (01/12/24)
File: dd-wrt.v24_std_generic.bin
Kernel: Linux 2.4.37 #73704 Fri Jan 12 02:28:39 +06 2024 mips
Previous: DD-WRT v3.0-r54475M std (12/07/23
Reset: No
Mode: Gateway, AP
Status: Ok
Uptime: ~26 hours
Issues/Errors: None to report at present. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sat Jan 13, 2024 5:04 Post subject: DD-WRT BS build 54905 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r54905 std (01/12/24)
Kernel: Linux rt-n18u-hst 4.4.302-st48 #10857 Fri Jan 12 02:30:18 +06 2024 armv7l DD-WRT
Previous: DD-WRT v3.0-r54637 std (12/29/23)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
Not 24/7; Not using CTF, FA, STP, IPv6, VPN, VAP;
USB storage(/jffs, /opt); NAS (ksmbd, lighttpd);
Cron enabled(default jobs deleted);
WAN DNS disabled; DDNS (no-ip.com) In-a-Dyn OK;
DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
Entware core (CPU: armv71) installed without problem;
Swap partition (USB) enabled for using GitHub
}
Reset: NO RESET (using command not WEBUI to flash; httpd disabled)
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2024/01-12-2024-r54905/asus-rt-n18u/
Summary
NO strangeless after first firmware reboot, and after cold boot.
Joined: 18 Mar 2014 Posts: 12922 Location: Netherlands
Posted: Sat Jan 13, 2024 7:30 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r54905M Community Build (01/12/24)
Kernel Version: Linux 4.4.302-st48 #1 SMP Fri Jan 12 12:43:57 CET 2024 armv7l
Upgraded from DD-WRT v3.0-r54569M Community Build (12/21/23) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: No not this time.
Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
Four WireGuard tunnels running, one Server, one site-to-site and two clients in Fail-over group to Mullvad (of course with PBR to allow the WG server to use the WAN).
OpenVPN client with PBR running.
DDNS (dynv6) working.
IPv6 working.
NAS and ksmbd working.
SmartDNS is working both with DoT and DoH
NVRAM size 56K (NVRAM size should not be a problem with the Xvortex CFE)
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r54905 std / Linux 4.4.302-st48 #10861 SMP Fri Jan 12 03:00:31 +06 2024 armv7l
Previous/Reset: r54682 / no
Mode/Status: Gateway / Up and running for 5:19 hours
CPU Temperature: CPU 58.0 °C / WL0 38.5 °C / WL1 0.0 °C (ambient temperature 17.0 °C)
Issues/Errors: Nothing significant
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
______________________________________________________________________________________________
Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r54905_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-st48 #28067 Fri Jan 12 12:58:28 +06 2024 mips
Previous/Reset: r54682 / no
Mode/Status: Gateway / Up and running for 1 days, 1:25
CPU Temperature: WL0 47.1 °C (ambient temperature 20.3 °C)
Issues/Errors: Nothing significant
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56029
Broadcom
Asus RT-AC87U R - DD-WRT 56029
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Mon Jan 15, 2024 8:54 Post subject:
ksmbd was broken. Unable to connect to its public shares. Unable to run "service samba3 stop" as well, the command just froze. Even kill command could not work on processes related to ksmbd.
Then I started a new SSH session and rebooted the router. ksmbd worked again for a moment, and then it didn't respond to Windows 10 again. Very strange...
The following screen was like this for an hour, after executing "service samba3 stop":