Posted: Sun Jan 14, 2024 6:52 Post subject: New Build - 01/14/2024 - r54914
Welcome to Broadcom r54914 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r54914 std / Linux 4.4.302-st48 #10870 SMP Sun Jan 14 04:07:55 +06 2024 armv7l
Previous/Reset: r54905 / no
Mode/Status: Gateway / Up and running for 1:45 hours
CPU Temperature: CPU 58.0 °C / WL0 38.5 °C / WL1 0.0 °C (ambient temperature 17.0 °C)
Issues/Errors: Nothing significant
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56029
Broadcom
Asus RT-AC87U R - DD-WRT 56029
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Sun Jan 14, 2024 11:21 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r54914 std (01/14/24)
Kernel Version Linux 4.4.302-st48 #10862 SMP Sun Jan 14 02:53:22 +06 2024 armv7l
update: CLI r54905 > r54914
reset: NO
mode: Gateway/DoT via Entware, AD-Block(via script), Firewall,Forced DNS,AP&Net Isolation,x3VLAN,VPN client(PBR),20 HT 2.4Ghz only(Vanilla )
status: Operational 1h+
errors: Turn Off Switch LED's (enabled) - it does nothing switch lights still on....
...Thanks BS and Team ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Mon Jan 15, 2024 8:51 Post subject:
alkanbw wrote:
R7000
in this build samba is totally broken - from windows and from android. Best build ever for me is 54682
After seeing your message, I went back to the build 54905 in my Asus RT-N18U. And ksmbd was indeed not responding to Windows 10. Also, I could NOT even run "service samba3 stop" to restart it. Rebooting made ksmbd worked again for a moment, then ksmbd failed again.
Update:
I back-tracked to builds r54652 and r54682. Both of them had ksmbd working fine.
Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r54914_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-st48 #28099 Sun Jan 14 04:39:20 +06 2024 mips
Previous/Reset: r54905 / no
Mode/Status: Gateway / Up and running for 1 days, 6:35
CPU Temperature: WL0 47.1 °C (ambient temperature 20.3 °C)
Issues/Errors: Nothing significant
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56029
Broadcom
Asus RT-AC87U R - DD-WRT 56029
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router/Version: Asus RT-N66U
File: dd-wrt.v24-54914_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r54914 big (01/14/24)
Kernel: Linux 4.4.302-st48 #28099 Sun Jan 14 04:39:20 +06 2024 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed two days ago, OK.
Router/Version: Linksys WRT54G v2.2
File/Kernel: dd-wrt.v24_mini_wrt54g.bin DD-WRT v3.0-r54914M mini (01/14/24) / Linux 2.4.37 #73712 Sun Jan 14 01:43:11 +06 2024 mips
Previous/Reset: DD-WRT v3.0-r49544 mini (07/22/22) / nvram erase && reboot
Mode/Status: switch / working (station bridge also working)
Issues/Errors: none
------------------------------------
Router/Version: Asus RT-N10U (original ver, black)
File/Kernel: dd-wrt.v24-54914_NEWD-2_K3.x_mega_RT-N10U.trx DD-WRT v3.0-r54914 mega (01/14/24) / Linux 4.4.302-st48 #28103 Sun Jan 14 04:44:34 +06 2024 mips
Previous/Reset: DD-WRT v3.0-r50357 mega (10/05/22)
/ nvram erase && reboot
Mode/Status: Station Bridge / working
Issues/Errors: none
------------------------------------
it's been many years since I last manually typed the report and it's still a pain in the *** _________________ ▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
▫ easyddup - A simple upgrade/downgrade utilityby yoyoma2--- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
Router/Version: Asus RT-AC68U File/Kernel: Linux DD-WRT 4.4.302-st37 #8877 SMP Wed Mar 8 05:11:52 +06 2023 armv7l DD-WRT Previous/Reset: DD-WRT v3.0-r51976 std (03/08/23) Mode/Status: switch-ap / not working Issues/Errors: Lost the Vlans and interface-vlan association
Hi, I'm not sure if this is the right place to ask for help, but I tried to flash this build, and I've found out that the Switch Config tab was empty (all the checkboxes were empty). I tried to keep the build and restore the config but it didn't work. I had to restore the previous build.
For reference, I've attached my current config.