Posted: Mon Jan 22, 2024 14:56 Post subject: New Build - 01/22/2024 - r55003
Welcome to Broadcom r55003 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Mon Jan 22, 2024 16:42 Post subject:
ksmbd was still broken. Got the following in the process list, the command (possibly called by process_monitor) likely froze!! We knew that during init, DD-WRT's processes were always restarted multiple times.
Code:
# ps | grep smb
2xxx root [ksmbd:54026]
2xxx root sh -c echo hard > /sys/class/ksmbd-control/kill_server
5xxx root grep smb
Also, USB auto-mount failed for /jffs. /dev/sda1 for jffs was completely ingored. Strangely, /opt (/dev/sda5) was mounted properly. sda1 was also NOT listed in WEBUI's USB page. Lighttpd also reported failed SSL certificate.
But that was the first firmware reboot.
After cold boot, jffs was back and... ksmbd responded for a brief period of time, then failed. Basically, ksmbd was behaving like build 54905. A kernel problem??
Well... going back to 54682.
One small thing:
I issued "service samba3 stop" in build 55003. Of course, the command froze and couldn't be killed. Without thinking, I flashed the firmware back to 54682. You could see the messages from the write command came out slowly. It's lucky that the write completed without error. BUT it's better to reboot once first, making sure no processes were freezing. _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r55003 std / Linux 4.4.302-st48 #10912 SMP Mon Jan 22 14:50:22 +06 2024 armv7l
Previous/Reset: r54914 / no
Mode/Status: Gateway / Up and running for 3:12 hours
CPU Temperature: CPU 60.8 °C / WL0 39.5 °C / WL1 0.0 °C (ambient temperature 17.0 °C)
Issues/Errors: Nothing significant
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55819
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Posted: Tue Jan 23, 2024 8:33 Post subject: R 55003 and samba
Router: R7000
Build: 55003
I played with some options in Samba Configuration and in Access Level with Resticted option, Samba working without any problems. Does not worh with Everyone option.
I do not have any other problems with this biuld - thanks.
PS.After some time, samba stopped working. Several times the router froze and became unresponsive.
Went back to biuld 54682
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Tue Jan 23, 2024 14:33 Post subject: Re: R 55003 and samba
alkanbw wrote:
I played with some options in Samba Configuration and in Access Level....
PS.After some time, samba stopped working. Several times the router froze and became unresponsive.
Went back to biuld 54682
Settings were not relevant. It's the problem of ksmbd process itself.
edit:
On second thought, maybe it's the kernel module function. ext4 can be a kernel module, so does ksmbd. _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
