[blkt]

Welcome to Marvell r55009 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 55003 (mirror)

• OpenVPN 2.6.8: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• 4.4 cURL Gateworks 3.10 LTO QMI mac80211 rtl8156b x86 DC Marvell hostapd PCI bs Tor SFE bridge Unbound USB invalid
• jffs2 dco 6.1 4.14 ath11k wrt1900ac clk o3 DC ea8500 serial Marvell 6.1 MT ksmbd Plex Newport labels mac80211 mwlwifi
• r54203 r54248 r54420 r54475 r54517 r54545 r54569 r54604 r54637 r54652 r54682 r54905 r54914 r55003 r55009

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[Monza]

Router/Version: Linksys WRT1200ac v1
File/Kernel: r55009 Linux 6.1.74 #263 SMP Tue Jan 23 04:33:26 +07 2024 arm
Previous/Reset: r55003 No reset
Mode/Status: Gateway,VPN, Stable
Issues/Errors: None

[spastorino]

Router/Version: Linksys WRT1900ACS v2
File/Kernel: Linux 6.1.74 #263 SMP Tue Jan 23 04:33:26 +07 2024 arm
Previous/Reset: upgrade, factory defaults after boot, enter new settings
Mode/Status: AP, basic home internet
Issues/Errors: No 5ghz anymore after every hard shutdown

As I've explained in this thread https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=335760, after installing the new firmware and rebooting everything works perfectly but once I shutdown the router and turn it on again, 99% of the times 5ghz network is not available anymore. If I use the wired network everything works.

I'm pretty sure this is related to some configuration because I've started going back in time, upgrading firmware, resetting to defaults and applying some configs and same results, tried 06-22-2023-r53045 and also a version from march and same results, after shutting down and turning it back on, no 5ghz.

The relevant settings I've applied are ...

Setup
Basic Setup
SFE is disabled

Wireless
Basic Settings
wlan0
Radio Mode: AP
Domain: Uruguay
Network Mode: AC/N Mixed
Channel Width: VHT80 (80 MHz)
TX Power: 15dBm
wlan1
Network Mode: Disabled

Wireless Security
Security Mode: WPA
Network Authentication: WPA2 Personal

[MotoBlue]

Router/Version: Linksys WRT32X
File/Kernel: r55009 Linux 6.1.74 #263 SMP Tue Jan 23 04:33:26 +07 2024 arm
Previous/Reset: r55003 No reset
Mode/Status: Gateway,Stable
Issues/Errors: one - LAN DHCP status

Every time I update my WRT32X The STATUS - LAN shows an enabled DHCP server with a scope 192.168.0.64 - 192.168.0.73. There is one problem. I have never knowingly enabled the DHCP server on the lan. My pihole provides DHCP. Pihole diagnostics tests for DHCP servers on the network and confirms that my WRT32X has no DHCP server on the lan. I do have a DHCP server running on WLAN1 with a different scope.

[ewo32]

Router: Linksys WRT32X
Firmware: DD-WRT v3.0-r55009 std (01/23/24)
File: ddwrt-linksys-wrt32x-webflash.bin
Kernel: Linux 6.1.74 #263 SMP Tue Jan 23 04:33:26 +07 2024 arm
Previous/Reset: DD-WRT v3.0-r55003 std (01/22/24) / No reset
Mode/Status: Gateway (PPPOE), AP, wlan0 5GHz AC-only VHT80 WPA2-Personal-CCMP, wlan1 2.4Ghz N-only HT40 WPA2-Personal-CCMP, wlan2 disabled, DDNS (SSL), encrypt DNS (DNSSEC, check unsigned DNS replies), virtual interface (2.4GHz, unbridged, AP isolation, net isolation, DHCPD, web UI disabled), ssh (non-default port, public key, password login disabled, remote management, tcp forwarding), wireguard server (non-default port, preshared key) / Uptime 24 hrs.
Issues/Errors: None.

[PavelVD]

Router: Linksys WRT1900ACSv2
Firmware: DD-WRT v3.0-r55009 std (01/23/24)
Kernel: Linux 6.1.74 #263 SMP Tue Jan 23 04:33:26 +07 2024 arm
NAS via USB:
/dev/sda - Block device, size 931.5GiB, Partition: 1-Ext4, 2-Ext4 , 3-swap.
NFS Server: Shared the same partitions as in Samba.
Samba: Protocol Version SMB 2.10\SMB 3.11
Issues/Errors:
SMB is not stable. When copying a large file (folder) from SMB to a PC (Win10 connected by wire), the router unexpectedly reboots.
Latest entries from the log:

[jd8121]