Posted: Mon Jan 29, 2024 7:07 Post subject: Lan & wlan disappears after enabling vlan - wnr3500l
I´m exploring the possibility with dd-wrt and vlan/wlan to keep IoT stuff sandboxed but it seems I need some help after some serious headbutting.
I couldn´t install this build directly because the lan would crap out directly after flashing, I had to initially install a waay older build that worked ootb and then the 55009 build would work. That was the first issue.
Now when I try to do _anything_ on the Switch Config tab in the attachment provided both the wlan & lan craps out on me. This happens even if I just "save" and "Apply settings" in the tab, no other settings made. Am I stuck using older builds?
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Mon Jan 29, 2024 8:44 Post subject:
Working with Vlan set up, requires patience, waiting, understanding and couple of reboots...it never failed on me...
If the page is corrupt and doesn't show up correctly...try reset and start from the scratch..
Enabling vlans(switch config page) also may require few reboots..to start with..
Also i have to admit...there is also a way to build your vlan set up via swconfig commands via start up script ... so, there is an alternative way too...
Also, instead of save and apply, try save and reboot _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
33555 is a quite old build...i hope you are not using it for a serious stuff..as this build not that is very old, but seriously lacks of security updates..anyway...you know what you are doing..
if WEB interface is buggy:
-you can reboot the httpd service
-you can try clearing your browser cache
-try to reset router and manually reconfigure...
-when you reset and enabled Switch Config interface in order to appear correctly,
it may require a few reboots..
-same is when you add vlans, bridges and ect.
-save and reboot, could be a touch better than save and apply...
if those web interface errors continue to occur than..it is a more likely a bug...(it could be)
_________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
33555 is a quite old build...i hope you are not using it for a serious stuff..as this build not that is very old, but seriously lacks of security updates..anyway...you know what you are doing..
if WEB interface is buggy:
-you can reboot the httpd service
-you can try clearing your browser cache
-try to reset router and manually reconfigure...
-when you reset and enabled Switch Config interface in order to appear correctly,
it may require a few reboots..
-same is when you add vlans, bridges and ect.
-save and reboot, could be a touch better than save and apply...
if those web interface errors continue to occur than..it is a more likely a bug...(it could be)
Thanks for your input/advice
Staying below 46604 does not produce the aforementioned disconnects...could be something to do with the implementation of swconfig & the 3500L ?...just a hunch
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Tue Jan 30, 2024 22:31 Post subject:
ho1Aetoo It could be broken only on wnr3500l in particular mini builds...
Also it has 2 versions, one has 8MB the other has 126MB flash..
I can confirm on the 8MB 1043v2 those worked the last time i tried..55009
and it also has swconfig...so, not all 8MB flash size routers are affected... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Wed Jan 31, 2024 7:59; edited 1 time in total
I presume this is a V1, and not a V2, and the only reason to use K26 builds is cosmetic (K3X identifies it as WRT54G*). You can use the mega K26 or mega K3X on this router provided it is not over a certain size. K3X should have swconfig and working Switch Config / VLANs tab, though:
