Joined: 20 Oct 2009 Posts: 44 Location: Czech Republic
Posted: Thu Feb 15, 2024 14:00 Post subject:
My Archer C7 V2 (US) is connected via WDS to another dd-wrt router (Netgear Nighthawk X10 R9000),
then i have a VAP - AP(WDS) configured on the C7 to extend the wifi network, but this VAP is not showing up anymore to any client.
Router/Version: Netgear R7800 / 55109 std
File/Kernel: dd-wrt-webupgrade.bin
Mode/Status: All lights ok
Issues/Errors: Random reboots - not every day but frequent
Last I noticed the reboot on the router I saw that all led lights went out except for power that though became orange for some time.. until router started up again I suppose after 1 min or so devices connected automatically again... (has happend to me 5 times or so since update until this date)
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Thu Feb 22, 2024 11:04 Post subject:
hookdk wrote:
Router/Version: Netgear R7800 / 55109 std
File/Kernel: dd-wrt-webupgrade.bin
Mode/Status: All lights ok
Issues/Errors: Random reboots - not every day but frequent
Last I noticed the reboot on the router I saw that all led lights went out except for power that though became orange for some time.. until router started up again I suppose after 1 min or so devices connected automatically again... (has happend to me 5 times or so since update until this date)
Thanks though for keeping making updates
so, far i ve 12 days with no reboot or anything else bad to happen all working...
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r55109 std (02/09/24)
Kernel Version Linux 6.1.77 #109 SMP Thu Feb 8 07:07:57 +07 2024 armv7l
update: CLI r55052 > r55109
reset: NO
mode: Gateway/DoT via Entware, AD-Block(via DNS), IPset Firewall, Forced DNS, AP&Net&Bridge Isolation, x3VLAN, VPN client(PBR), Channel 11@40 HT 2.4Ghz only(Vanilla)
status: Operational 12days+
errors: Nothing new, yet...Thanks BS and Team !
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r55109 std (02/09/24)
Kernel Version Linux 3.18.140-d6 #192570 Fri Feb 9 07:01:13 +06 2024 mips
update: GUI r55052 > r55109
reset: NO
mode: Gateway/DoT via Entware, AD-Block(via DNS),Firewall, Forced DNS, AP&Net&Bridge Isolation, x1VLAN, VPN client(PBR), Channel 11@40 HT 2.4Ghz only(Vanilla)
status: Operational 2days+
errors: Nothing new, yet...Thanks BS and Team ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Thu Feb 22, 2024 13:57 Post subject:
@hookdk, do you have SFE enabled? There is a known issue with random reboots when SFE is enabled. _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
@hookdk, do you have SFE enabled? There is a known issue with random reboots when SFE is enabled.
Thanks for your hint.. I can for now say I only have sfe if that is enabled by default(?) .. I will look into it when I'm back home (writing from phone) and I also am not sure what it is.. but will look at it.. thanks... (I also need look at Vlan since my provider saying I can run directly with that vlan 101 on my router... am a bit tired of the provided router so would like to have r7800 directly connected to fiber box.. but that's a different matter) thanks again
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Fri Feb 23, 2024 19:36 Post subject:
hookdk wrote:
Thanks for your hint.. I can for now say I only have sfe if that is enabled by default(?) .. I will look into it when I'm back home (writing from phone) and I also am not sure what it is.. but will look at it.. thanks... (I also need look at Vlan since my provider saying I can run directly with that vlan 101 on my router... am a bit tired of the provided router so would like to have r7800 directly connected to fiber box.. but that's a different matter) thanks again
It is enabled by default. I have my R7800 connected directly to the Verizon ONT, and it works fine for internet (note that without SFE, you're limited to roughly 800Mbs).
If you have TV, you'll need at least a MoCA adapter to provide data to the coax-connected cable boxes. You may also have to forward some ports. Google search for your provider and "use your own router". _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
@dpp3530
I have now disabled SFE.. the router also rebooted today so have to try to fix that first... The other thing yeah I know how to search Google ofc! But I'm not from US so my provider doesn't come up alot in the search.. though they have some general guides which mainly only saying set the vlan to 101 (in standard firmware for R7800).. My provider is Danish Hiper... But I didn't wanna "spam" this thread with this since it was about the new firmware.. But I have now disabled the SFE as said don't know if it effects the speed I also need try run directly too without the provided router and then see the speed (but ofc need setup vlan for it).. anyways thanks a bunch
I also need look at Vlan since my provider saying I can run directly with that vlan 101 on my router.
VLAN tagging on the WAN port is quickly set up - see my signature.
This is at least true for pure Internet - IPVT is unfortunately a bit more complicated.
I will definitely look at your guide there thanks alot for showing and making the guide
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Mon Feb 26, 2024 2:33 Post subject:
hookdk wrote:
I have now disabled SFE.. the router also rebooted today so have to try to fix that first... The other thing yeah I know how to search Google ofc!
I certainly did not mean to imply otherwise, just didn't have specific advice. As far as I can tell, different providers use different TCP ports, hence the Google suggestion. _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
I have now disabled SFE.. the router also rebooted today so have to try to fix that first... The other thing yeah I know how to search Google ofc!
I certainly did not mean to imply otherwise, just didn't have specific advice. As far as I can tell, different providers use different TCP ports, hence the Google suggestion.
Do you yourself have turned off SFE in yours? You said the thing with speed... I would ofc like to have it running as fast as possible but where its running OK.. The version I had before was more than a year old.. might go back to that .. but for now am just testing with sfe turned off then will report back when I feel certain what that did...
Here below is some guides from my provider but it's really nothing special Vlan tagging with 101 .. I tried some older ddwrt guides from the forum some time back but couldn't get it to work in ddwrt .. but just if you were curious here's a SS and a link to my providers guide (though in Danish)
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Mon Feb 26, 2024 13:14 Post subject:
My internet is 500/500, and the R7800 easily handles that with SFE off. YMMV. If I had gig intenet, I might consider going back to an older K4 build and enabling it. Reports in this forum say somewhere near 800/800 is the limit without SFE.
My ISP didn't need vlan tagging, and basic TV (guide, on-demand) works if I just go LAN to WAN on an old Verizon router I bought on eBay (it was cheaper than a MOCA device). My setup is currently a bit more convoluted with a three-router system to get Remote DVR to work, but it's still better than the ISP router. _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
