Posted: Fri Feb 09, 2024 6:31 Post subject: New Build - 02/09/2024 - r55109
Welcome to Broadcom r55109 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r55109 std / Linux 4.4.302-st48 #10993 SMP Fri Feb 9 04:29:17 +06 2024 armv7l
Previous/Reset: r55052 / no
Mode/Status: Gateway / Up and running for 2:05 hours
CPU Temperature: CPU 63.6 °C / WL0 40.5 °C / WL1 0.0 °C (ambient temperature 17.0 °C)
Issues/Errors: Nothing significant
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
CPU temperature is not displayed correctly.
CPU temperature readings started changing after one second from 62.5 - 63.5 °C
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55819
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Joined: 18 Mar 2014 Posts: 12921 Location: Netherlands
Posted: Sat Feb 10, 2024 12:16 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r55109M Community Build (02/09/24)
Kernel Version: Linux 4.4.302-st48 #1 SMP Fri Feb 9 11:59:38 CET 2024 armv7l
Upgraded from DD-WRT v3.0-r54905M Community Build (01/12/24)via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: No not this time.
Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
Four WireGuard tunnels running, one Server, one site-to-site and two clients in Fail-over group to Mullvad (of course with PBR to allow the WG server to use the WAN).
OpenVPN client with PBR running.
DDNS (dynv6) working.
IPv6 working.
NAS and ksmbd working.
SmartDNS is working both with DoT and DoH
NVRAM size 56K (NVRAM size should not be a problem with the Xvortex CFE)
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sun Feb 11, 2024 8:07 Post subject:
KACTET wrote:
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
I have been wondering:
This method does make Status->Wireless show "TX Power: Inactive", and "Radio Status: Inactive".
But was the router's radio really NOT sending out any signal (2.4 GHz & 5 GHz)?
Did you test it with some kinds of EMF (WiFi) meters from Amazon? _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 25 Aug 2020 Posts: 56 Location: New York, USA
Posted: Sun Feb 11, 2024 23:44 Post subject:
Router/Version: R7000
File/Kernel: netgear-r7000-webflash.bin
Previous/Reset: r55033, no
Mode/Status: Router, Secondary AP only
Issues/Errors: 5GHz suddenly became inaccessible
5GHz signal was visible but became unconnectable after around 1 day 23:39 uptime. This issue has persisted with pretty much every build I've used on my R7000 for the past several months unfortunately. The previous build I tried on this device dropped 5GHz after around 1 day's worth of uptime (r55033), and the one before that held out for around 4 days. _________________ HP EliteDesk 800 G2 Mini PC [i3-6100T] (WAN, DHCP, QoS)
NETGEAR R7000 (AP)
NETGEAR WNDR4300 (Switch)
Router/Version: R7000
File/Kernel: netgear-r7000-webflash.bin
Previous/Reset: r55033, no
Mode/Status: Router, Secondary AP only
Issues/Errors: 5GHz suddenly became inaccessible
5GHz signal was visible but became unconnectable after around 1 day 23:39 uptime. This issue has persisted with pretty much every build I've used on my R7000 for the past several months unfortunately. The previous build I tried on this device dropped 5GHz after around 1 day's worth of uptime (r55033), and the one before that held out for around 4 days.
Seems like a hardware error or a bad power supply. Works flawless for me with all, good, builds including this one. _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Mon Feb 12, 2024 8:47 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r55109 std (02/09/24)
Kernel Version Linux 4.4.302-st48 #10985 SMP Thu Feb 8 08:17:31 +06 2024 armv7l
update: CLI r55052 > r55109
reset: NO
mode: Gateway/DoH via SmartDNS, AD-Block(via script),Firewall (Iptables and IPset rules),Forced DNS,AP&Net Isolation,x4VLAN,VPN client(PBR),40 HT 2.4Ghz only
status: Operational 72h+
errors: Nothing new, yet...Thanks BS and Team ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r55109_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-st48 #28555 Fri Feb 9 05:23:51 +06 2024 mips
Previous/Reset: r55052 / no
Mode/Status: Gateway / Up and running for 3 days, 5:19
CPU Temperature: WL0 48.5 °C (ambient temperature 20.3 °C)
Issues/Errors: Nothing significant
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55819
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Mon Feb 12, 2024 15:30 Post subject:
egc wrote:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r55109M Community Build (02/09/24)
....
NAS and ksmbd working.
May I ask whether ksmbd in this build 55109 really would NOT stall 50 seconds after being started/init?
In previous three 55xxx builds, ksmbd stalled after a while, making it unusable. And you could not "service samba3 stop". Even the command itself stalled. There were also other stability problems, including USB.
Update (for Asus RT-N18U rev. A1):
ksmbd still stalled about 50 seconds after init. It's still impossible to stop ksmb, not even by the init process. At least reboot worked fine. WAN, Wired LAN and WLAN (wifi) were working OK, including Dropbear sessions. USB was auto-mounted properly.
Code:
# ps | grep smb
2809 root [ksmbd:50031]
2896 root sh -c echo hard > /sys/class/ksmbd-control/kill_server
4542 root grep smb
BTW, on 2nd (or is it the 3rd) reboot, all connections to DD-WRT build 55109 was lost. Needed to cold boot the router to fix it. This strangeness might become a security exploit?? Related to ksmbd changes?
Rolling back to 54682 because of ksmbd issue. _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Posted: Tue Feb 13, 2024 23:16 Post subject: DNScrypt rt-ac68u vA
Sorry long hiatus with Fresh Tomato truly there is So Much More Help with DD-WRT!
Unable to setup DNSCrypt Resolver using TLS errors. Have tried on a few different verisons same result.
Feb 13 13:18:00 DD-WRT user.err smartdns: create icmp socket failed, Address family not supported by protocol
Feb 13 13:18:00 DD-WRT user.info : [smartdns] : successfully started
Feb 13 13:18:00 DD-WRT daemon.crit dnsmasq[2335]: bad option at line 21 of /tmp/dnsmasq.conf (this is log failure)
Feb 13 13:18:00 DD-WRT daemon.crit dnsmasq[2335]: FAILED to start up
Feb 13 13:18:00 DD-WRT user.info : [dnsmasq] : Error on startup, returncode 1
router ver RT-AC68U var
fw ver - DD-WRT v3.0-r55109 std (02/09/24)
kernel - Linux 4.4.302-st48 #10985 SMP Thu Feb 8 08:17:31 +06 2024 armv7l
Previous ver r54682 "same results"
mode - gateway router - Vlan 3/br1, Vlan 4/br2 (dhcp working) wlan 2.4 N only and no 5 ghz devices being used
jffs on defualt - usb never worked on this router and the v3 replacement is buggy across the board so it will hold samba
Update Method - default settings first reboot - then hard reset - pw change reboot -
